#1 Home Improvement Retailer

Cart

Cart

Home
Lumber & Composites
Decking
Fascia Boards

Questions and Answers for NewTechWood UltraShield 0.6 in. x 12 in. x 12 ft. Brazilian Ipe Fascia Composite Decking Board

Internet #301644112

Model #US05-12-IP

Store SKU #1002423969

UltraShield 0.6 in. x 12 in. x 12 ft. Brazilian Ipe Fascia Composite Decking Board
(52)Questions & Answers (45)
  • UltraShield technology provides supreme durability
  • For more info about any NewTechWood products call: 855-592-8088
  • Vibrant grain pattern offers a stunning visual appeal
View Full Product Details

Questions & Answers

45Questions
caret
Q:Does the plank have to be installed on a specific side or any of the two sides will do it?
by|Aug 17, 2021
1 Answer
Answer This Question

A:  Either of the two sides can be used.

by|Aug 26, 2021
    caret
    Q:does the facia boards only come in 6ft or 12 ft sections or can you order 16 ft boards
    by|Aug 9, 2021
    1 Answer
    Answer This Question

    A:  16 foot boards can be ordered, see your local Home Depot store to order. Mike

    by|Nov 28, 2021
    1 found this answer helpful
    caret
    Q:can this be painted?
    by|Apr 18, 2021
    1 Answer
    Answer This Question

    A:  No, we do not recommend painting our products.

    by|Apr 23, 2021
      caret
      Q:Can this be used in curved applications?
      by|Mar 18, 2021
      1 Answer
      Answer This Question

      A:  You could but you would have to make the fascia very hot to be able to bend it.

      by|Apr 16, 2021
        caret
        Q:Can these boards ripped down to 9.75”. and have both edges exposed?
        by|Jan 3, 2021
        1 Answer
        Answer This Question

        A:  Yes they can.

        by|Apr 14, 2024
          1 found this answer helpful
          caret
          Q:From what I can see the finish is laminated on the composite board so my question is if a piece is ripped in with how do I treat that newly exposed material to look and hold up like the manufacture edge
          by|Aug 7, 2020
          1 Answer
          Answer This Question

          A:  Please apply 2 coats of a water based sealer used for wood decks.

          by|Apr 14, 2024
            1 found this answer helpful
            caret
            Q:would this UltraShield 12 wide product possibly happen to be available in a 16 ft length ?
            by|May 23, 2020
            1 Answer
            Answer This Question

            A:  Hi Me. We don't produce fascia boards in 16ft length. Only 12ft and 6ft lengths. Please if you have further questions please email us at inquiry@newtechwood.com or call us at 281-570-6450.

            by|Jul 2, 2023
              caret
              Q:Is the Fascia the same color on both sides?
              by|Nov 20, 2019
              1 Answer
              Answer This Question

              A:  Hi, George! That is correct. The fascia boards are the same color on both sides. However, please keep in mind that one side is wood grain, and the other side is straight grain. Please feel free to email us at inquiry@newtechwood.com with any other questions you may have, or for further clarification, or for a sample.

              by|Nov 20, 2019
                caret
                Q:I saw where they make custom orders. I have a large order but hate to waste materials. Can I have my material made to order? Everything is Hawiian Charcoal. I need 25 pieces of Magellan 9'1" long. 17 pieces of Columbus 9'1" long for my front steps and 28 pieces of Magellan 52" long and 20 pieces of Columbus 52" long and 12 pieces of each 4 foot long for my rear steps. Also if the Fascia Composite decking board could be made 6.5 inches wide or 13 inches so I could cut them in half, I would buy 18- 6.5" or 9 -13" for the front at 8' 6" long and 22-6.5" or 11-13" at 52" long and 8-6.5" or 4-13" at 4 foot long for the rear. Also, I need a 8-6 piece of Magellan that is only 3" wide for the front landing and a 3" piece that is 52 long for the rear landing. Thanks.
                by|Nov 20, 2019
                1 Answer
                Answer This Question

                A:  Hi, Tim. You are correct that we do make custom pieces, but it sounds like there is some confusion. You would need a 2400 linear feet minimum (as seen on the Custom Colors and Profiles page here: https://www.newtechwood.com/custom-colors/). While at the onset, this board order does not look to meet this requirement, I went ahead and did the math, and indeed you have a total of about 700 linear feet, which includes combining the deck boards and the fascia boards, well below this threshold,. We recognize the need to avoid waste, but it would not be feasible to make such precise board dimensions, for an order of this size. While it is not ideal, my recommendation would be buy a combination of 8 foot and 16 foot boards and cut to your desired length. You could do this through both HomeDepot.com, and the Home Depot Pro-Desk. Please feel free to email us at inquiry@newtechwood.com with any other questions you may have, or for further clarification.

                by|Nov 23, 2019
                  caret
                  Q:Can this material be heated with a heat gun and somewhat shaped?
                  by|Oct 21, 2019
                  1 Answer
                  Answer This Question

                  A:  Hi, yes, this is possible. However, please do so at your own risk. To confirm the ideal temperature and conditions under which this would work best, please test on a sample, with all necessary safety precautions. Please reach out to inquiry@newtechwood.com if you have any other questions.

                  by|Oct 21, 2019
                    page 2 page 4

                    Frequently Bought Together

                    +
                    +
                    Price:
                    $92.65
                    $109.00
                    Save $16.35 (15%)