Questions and Answers for Orbit 12-Station Easy-Set Logic Indoor/Outdoor Sprinkler Timer

A:  Yes, you can wire it to send the necessary current to your pump. The controller has enough zones, you can use one specifically for your pump.

A:  Yes, this will work with a 220v sprinkler pump.

A:  6 feet.

A:  The battery in this timer is a lithium CR2032 battery.

A:  • Turn the dial to [AUTO] • Press the [MANUAL] button. Display will show ABC and ALL. After a few seconds or by pressing [ENTER] the timer will begin manual watering • All stations will water consecutively for their programmed duration Note: If the run times have not been set, the timer will not initiate manual watering and the screen will return to the current time. • To specify a specific program or stations, Press the [ <, > ] buttons to select A, B, or C. • Press [ENTER] to activate • To select a specific station, continue pressing the [ <, > ] buttons until desired station number appears • Press the [+/–] to enter the desired duration from 1 to 240 minutes • Wait 5 seconds and your station will begin • To stop Manual Watering press [CLEAR] • The timer will go back to your original automatic watering schedule

A:  Yes, this timer can operate as many as four stations or as little as one.

A:  For troubleshooting help, please contact our Orbit support team by phone at (800) 488-6156 or online at support.orbitonline.com.

A:  Start times refer to entire programs and not specific stations, but you are able to schedule 4 different run times per program. Stations will then run one after the other if they are assigned a run time.

A:  Yes that is possible but we recommend contacting a professional electrician to accomplish hard wiring the timer.

A:  For troubleshooting help, please contact our Orbit support team by phone at (800) 488-6156 or online at support.orbitonline.com.

A:  Yes, this can work with other companies sprinkler heads.