Q:I have a Summit 670’with low gas flow. Cleaning insect screen& burner tubes did not correct problem. Do I need to replace the regulator & hose? If so what is the correct part number for that replacement?
by|Sep 17, 2021
2 Answers
Answer This Question
A: Make sure the oil gas flow isn’t caused by a leak such as a side burner valve being slightly open. Gas regulators have a bypass feature to prevent gas flow if a leak is detected
by|Sep 20, 2021
A: If you are noticing low gas flow, there could be a leak in your gas line. Please perform a soapy water leak test and inspect your propane tank (as the leak often comes from a bad gasket inside the tank). Please contact Weber for further assistance.
by|Oct 9, 2021
Q:Whats the lenght of the hose?
by|Jun 14, 2021
3 Answers
Answer This Question
A: It is about 24 inches. I did not measure exactly, as it is installed and winds around.
by|Jun 19, 2021
A: This includes a 30 in. rubber hose (5/16 in. diameter) with regulator, threaded brass fitting and QCC1 coupling nut.
by|Jun 14, 2021
A: 30 inches
by|Jun 18, 2021
Q:I'm sorry didn't give all the information. Does this fit a Genesis 2 LX?
by|Apr 20, 2021
2 Answers
Answer This Question
A: Yes.
Genesis 300 Gas Grill
Model 7627
30" Replacement
by|May 3, 2021
A: Hi! The parts numbers are different between the Genesis 300 series and the Genesis II LX grills. Please reach out to Weber's support team with your grills serial number. They would be happy to provide you with the correct part number. Thank you!
by|Apr 20, 2021
Q:Will this regulator fit a Genesis 2 LX
by|Apr 20, 2021
1 Answer
Answer This Question
A: Hello, thank you for question! This hose will not fit the Genesis II LX series. Hose part number 67069 will work. Thanks!
by|Apr 21, 2021
Q:will this fit Genesis 2
by|Apr 20, 2021
1 Answer
Answer This Question
A: Hello, this hose and regulator will not fit a Genesis II series. The hose that will fit is part number 67069. Thanks!
by|Apr 21, 2021
Q:Stainless steel hose and regulator
by|Oct 18, 2020
1 Answer
Answer This Question
A: Hello, the hose and regulator is not stainless steel. Thanks!
by|Oct 19, 2020
Q:Will this work with a Twin eagle grill
by|Oct 10, 2020
2 Answers
Answer This Question
A: HI, This product will only work for a Weber Grill. Thank you,
by|Oct 11, 2020
A: Can't answer,do not know. If your Twin Eagle grill is made by Weber call the Weber customer service number. I found them to be very helpful. If you give them your model number they will have the exact fit at the same price as Home Depot.
by|Oct 11, 2020
Q:Will this fit a Weber Spirit e-310?
by|Oct 10, 2020
1 Answer
Answer This Question
A: Hi Ed, thank you for your question! This hose and regulator will not fit your Weber Spirit E-310. However, part number 69891 hose and regulator will. Thanks!
by|Oct 10, 2020
Q:Need a new hose for a Q series webber grill
by|Sep 11, 2020
2 Answers
Answer This Question
A: Hi! The hose required for your Weber Q is part number 6501 https://www.homedepot.com/p/Weber-6-ft-Adapter-Hose-for-Go-Anywhere-Q-Gas-Grill-6501/100130667. Thanks!
by|Sep 11, 2020
A: The best solution we found was to call Weber Customer service. You need the model.no. if your grill and they will tell you the proper hose. Their price was the same as Home Depot and it arrived by mail in a few days.
by|Sep 12, 2020
Q:Will this work with the Genesis® II S-335 Gas Grill?
by|Aug 14, 2020
2 Answers
Answer This Question
A: Hello! This replacement will not work our Genesis II S-335. However, part number 67069 will work. Thanks!
by|Aug 15, 2020
1 found this answer helpful
A: Delivered in a week and I installed in 15 minutes. Working great.