Customer Reviews for Everbilt #8-10 x 1 in. White Ribbed Plastic Anchor with Pan-Head Combo Drive Screw (10-Piece)

Make sure to use a 3/16” drill bit and you will need a hammer to get the anchor into the wall. I use these to hang light items in concrete and they work just fine.

This is a ten piece package of metal pan head screws and plastic anchors. The screws are number 8-10 screw size, and the plastic anchors are three sixteenth by one inch long. they are good for hanging pictures or decorations on different non wood walls, they can be used on drywall or plaster. Drill a three sixteenth hole in marked position, insert plastic anchor, be sure to set it firmly in wall to engage the plastic tab, which helps stop turning or twisting in the wall when tightening the screw. Insert the screw and you are set.

These plastic anchors and screws are for light-duty anchor applications. If you plan to use these anchors and screws in 1/2 in. sheet rock the shear load limit is approximately 22 lbs. They are not recommended for overhead use. A 3/16 in. drill is required for installation of the anchor. The ribbed plastic anchors prevent the anchor from turning in the hole during installation. They expand as the screw is tightened for a secure hold and feature a split to ensure expansion on two opposing sides. They have a classic white finish for a simple look. I like the pan head screws for hanging picture frames that have wire for hanging and wall clocks.

Plastic wall anchor for attaching things to walls. The package says what size hole to drill, then just lightly hammer this in until it is flush with wall.

The anchors worked as desired. I used them in half-inch drywall with hooks. They went in easily and held securely. I would buy them again.

Necessary piece needed, works well...

great product; easy to use.