Awesome product for my application!! I came across this looking for a solution for a closet under the stairs. I had previously used battery operated LED strips with a remote switch and was never satisfied with the light output nor the battery life. I purchased a Wink Hub 2 for several other Lutron and Leviton devices and when I found this thought it would be perfect for this closet. I had to wire power into this closet anyway in order to plug in a charger for a Dyson vacuum, so it was a good opportunity to add this. It worked as expected and I was able to link it to my Amazon Echo via the Wink Hub 2 for voice control.
Then I took it a step farther. Since I didn't wire a switch in, the control was either with the app or with the Amazon Echo. I found the GoControl door sensors that are sold as part of a kit for an alarm system, but since they pair directly to the Wink Hub 2, using the Wink App robots, I was able to add a sensor switch onto the door, then setup the robot so that the light will automatically turn on or off with the door opening or closing! Far superior method than having to hardwire in a mortise door jamb switch for this type of functionallity.
I also set up the robots so that after 10 PM, if the door is opened, the light only comes on at 50% brightness so you aren't blinded in the middle of the night if you need to open the door.
One thing to note is that while you can buy the door sensor individually, it is more economical to buy it in the GoControl premium kit that contains 3 door/window sensors, a motion detector, and a 105db siren.
I did have a bit of an issue with the color temperature control. It wasn't showing up in the Wink app as indicated in the instructions. However, one I paired it up with the door sensor, I was able to access the color temp. Dimming worked fine either way which was really more important for me anyway.