Customer Reviews for Klein Tools 14-in-1 Precision Screwdriver/Nut Driver

This is a great precision screwdriver. The bits are well hidden in the handle, well secured and easily interchangeable. It contains all the necessary and 99% most commonly used tamperproof formats. Heat treatment and metal hardness is great without chipping. Although Klein carries replacements for almost all the bits, there are some like the T5 that are not carried yet. It's a great deal and indispensable tool with top quality of both design and manufacturing.

Just purchased this "14 in 1" . Turns out to be a 13 in one as it has 2 9/64 driver ends. The bits fit.

This set is great, and the lid is spring loaded so it self locks when shut. I needed this for repairing a part of my fishing equipment. Worked great

The bit labeled T10 in this set is way too small, more like a T8. See attached image. A true T10 is 2.43mm at the tip. Klein's is only 1.92. A true T8 (different manufacturer) is 1.95. Klein's T8 in this set is 1.98. So disappointing! Now I can't trust any of Klein's bits in this set. How many other people bought this set, not needing the "T10" right away, but expecting that Klein gave them a good one when they need it? Klein claims this set has a T10; I couldn't find any in it!

Love it had 1 before and the job i left maintenance supervisor didnt want to give me it back so i ended up getting another because i loved it so much theres not another like it made fpr any small electrical job that there is.

I use this to open some electronic devices at home has all the sizes and the screw holder piece handle extensions to reach those screws that are deep within the object that being worked on compact carrying case and a slide lock so nothing falls out by mistake when storing.

[This review was collected as part of a promotion.] Purchased at supply house , was a good price point . The fact that it was so sleek and small caught my eye , hopefully someone of meaning reads this review. On the 2nd generation , come out with a full line of sleek small tools , so someone like me who is in Attica and doesn’t have much room can take tools without them weighing me down or falling out every time. Also , put a clip on this screwdriver

Somewhat frustrating to find out that the interchangeable nut driver shafts do not include the 5/16” size. That driver is built into the body of the tool, meaning it lacks the access the other nut driver bits allow for. As other reviewers also mentioned, there’s no built-in or included storage for the bits, so plan ahead.

I have what they call a A Card in the IBEW so I have a wide variety of Klein tools going back 35 years in the electrical industry because A means anything I work on low-voltage high-voltage 6 inch aluminum pipe to cat 6 And all but one Klein product has never let me down I will continue to purchase Klein products till I retire then I will probably pass them on to an apprentice and I’m sure that person will get many years of use so keep up the good work and I highly recommend Klein products to anyone that is looking for a good well-made reliable tool to help them succeed in their field.

[This review was collected as part of a promotion.] This is a great screwdriver for hvac and controls will be buying backups to have don’t hesitate to buy this screwdriver

[This review was collected as part of a promotion.] I got this multi 6 months ago and have not regretted it a single day. I went from 8 mini screwdrivers rolling around the bottom of my tool box to one that can fit in my bag and handle any small screw head I run into as an electrician.

[This review was collected as part of a promotion.] Bought this last year... i use it often.. comes in handy with small screws... love klein multi-tools

[This review was collected as part of a promotion.] I bought this the same time as the 15-in-1 Ratcheting Multibit Screwdriver, and this has surpassed my expectations. I had both 4-in-1's and while they work great, clearing space in my pouch is always a plus. I've read reviews that said they broke the bits early on but I haven't had that problem. It's a little bigger and longer but it's not an issue considering I'm not reaching for 1 of 2 handles with a 50% chance of grabbing the wrong one.

This is a super nice Percision screwdriver set. Klein always makes a quality product and this is just one of the best precision screwdrivers I’ve ever owned and I have about 10 or 12 different ones plus I took a shank from one of my other ones and put it in this case which gives me four different lengths that I can use

I am always needing a precision screwdriver around the house and have trouble keeping up with all the different sizes. Problem solved. This tool has everything you will probably need from multiple sizes of nut drivers to all the precision ones you would most likely run into. I just used it at work the other day. We needed a security bit and this had the one we needed in it. Feels good in your hand not small and week. A real tool. A must have for your tool bag.

Much smaller than I expected but still a very nice little screwdriver. It has 14 usable areas to screw in multi-type fasteners. From 9/84 to ¼, flat head, phillips, star, nuts... It has a rubber handle but I can't say it's insulted and safe to use on live connections. I wouldn't... I like that it's all stored together and that makes it a bit harder to lose parts unless you forget to put them back in the screwdriver right away. It's compact and will fit in most tool boxes well. It's easy to use even for my arthritic hands. Nice little screwdriver at a nice little price for what is included.

Klein model #32314 14-in-1 Precision Screwdriver/Nut Driver is comfortable and easy to use. This tool is compact and offers a cushion-grip handle and spin cap for precision control. Tool bits include: Phillips #00, #0; Slotted 3/32 in., 1/8 in.; Tamperproof Torx T7, T8, T10, T15; Hex nut driver 9/64 in., 5/32 in., 3/16 in., 7/32 in., 1/4 in., and 5/16 in. This tool is designed with 6 sizes of interchangeable steel shaft for fast and easy bit changes. Bits are double ended to allow maximum size availability in a compact design. The compact design fits easily in a tool bag, toolbox or tool pouch. This tool is a must for the technician, job pro, or homeowner. This tool is a go to tool for service work for many trades. I highly recommend this tool.

This 14 in 1 precision screwdriver is a gem. This screwdriver may be small but is loaded with possibilities. The many different screwdriver bits are accompanied by several small nut sizes accommodating those small and often difficult nuts to remove to be accessed. This screwdriver is a must for any professional or hobbiest working with small parts. The swivel head makes it most beneficial and effectiveness to use.

First off, I might be overly excited because I got this mini 14 in 1 mini but I'm here to tell you that by far it is slowly becoming the favorite tool in my bag. Its not only totally versatile with every small screw or nut, its also very fun to use. I've always admired how well balance and machined Klein tools are and they're my favorite when it comes to low voltage or electrical. I'm getting 2 more, one for tool cabinet and one for RV

This screwdriver is perfect. I own a few different similar kits, but always seem to end up carrying too much unnecessary bits and such. This little thing has 8 different bits, and 6 nut drivers built in. Very well thought out, and only provides the most common types & sizes. I appreciate the thin rubber grip and slender profile. I've been using it for all kinds of stuff over the last couple weeks - very handy!

I like this screw/nutdriver. While it's too long for a shirt pocket, it's quite helpful when the nut or bolt you need to tighten or loosen is buried in the depths of the device you're working on. The variety of bits is adequate for most jobs, and the bits fit well in/on the fasteners they're designed for. It took me a moment to realize how everything is nested (and a bit of fiddling to get there as there is only ONE way to do it) so you never have to leave anything behind on the bench as you take the 'driver from task to task. This one goes in my handyman bag. It's a lot of tools for a very small space investment.

This is a very well made screwdriver, however the concept is actually ill conceived, in my opinion. The handle is well made with a spinner cap making rapid finger turning very easy. Very easy to keep a firm grip while spinning readily in the palm of the hand. The included bits are well crafted. However, as a portable tool, one that you would carry in a tool box to a job site, it is missing something to carry the extra bits and shafts in. You are on your own to find a pouch, a box, or whatever. As a bench tool it is better as the extra bits could be in a tray or box on or by the bench. But then if one is using this for bench work it is actually easier to have different single bit tools. That is my opinion. The tool is well made, just not well thought out for use as a carry-along tool. So keep that in mind when considering this screwdriver.

This is a pretty cool little tool. I was surprised to find that it was manufactured in Taiwan but appears to be up to Klein's usually excellent quality. Fit and finish are flawless. Klein nests together 8 pieces that combines 2 slotted and 2 Philips screwdrivers, 4 Torx drivers with 6 nut drivers into a single tool. This tool is designed for working on electronic equipment or small appliances. The spin cap on the tp of the handle aids in control of the tool when trying to remove s stubborn fastener. The only negative I encountered trying to reach a fastener that was recessed, the shaft gets thicker as each piece is nested together. The other question I had was are replacement bits available? Each of the 4 bits are a different size and will only fit a single nut driver.

This tool is exactly what I was looking for. I can’t imagine finding a superior quality multi-bit precision screwdriver, so I STRONGLY recommend it for professionals. The bits hold up! Here are the features I loved: Pro: Clever design allows for the small size in diameter, and reasonable length. Each nut driver doubles as a receptacle for a ball bearing bit to nest inside. The end result is a tool that fits right in your pocket. 7” total length (or remove the shank, and it’ll fit in your pocket even easier), and 0.88” diameter. It weights a little over 1/8 lbs. Pro: The shank is a robust carbon steel (would’ve preferred stainless steel) Pro - The ball bearing bit retention will keep the bit in place Pro - Great range of different heat-treated (industrial-strength) bits, and the following range of nut drivers 9/64”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”. The removable bits include #00 and #0 Phillips, 3/32” and 1/8” flat head, and T7, T8, T10 and T15 Torx. The sizes are etched into the bits and driver shafts, for convenience Pro - Cushion grip helps to apply more torque on a fastener If interested, these are made in Taiwan. This is NOT an insulated hand tool.

The electronics screwdriver has become a personal favorite. Reason being is the almost ideal size for any application. It also has a pivet head that allows you to spin the base while holding the top for a faster torquing motion. Just as any one would expect the Klein name brings the added quality as well. Very easy to carry, and a highly recommended tool for any tech or personnel working with electronic grade hardware.

They call this an HVAC screwdriver set (straight, phillips and schrader tips). Well if you wear metal frame glasses you would add glasses to the HVAC. Some of the metal frame glasses have the straight screws and some have the phillips screws, but trying to find a screwdriver that will fit into the tiny screws is almost an impossible thing. So you make a trip to the eyeglass place to have the screw that holds the lenses into the frame tightened. Now you can do it at home with this screwdriver. It also has the schrader tip that works on the valve stems valve or the valve for putting freon into an air conditioner.

Finally a multi-tip electronics screwdriver in a Klein cushion grip form. Absolutely brilliant, with the 4 most common Slotted and Phillips tips for panels, terminal strips, etc. Why buy the 4pc electronics set at $20, when this is half the cost, besides do you ever really use the 1/8" slotted one? The only criticism is that the tips don't have a very strong registration in the shaft, the ball bearing is very small, and the tips can come out easily. Not sure what can be done on such a small part. The overall fit and finish is what you would expect from Klein Tools.

Great quality tool, Klein tools are my preferred tools of choice. Excellent price at Home Depot

Very well made screwdriver. I would recommend!