

Return this item within 90 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
The 32 sq. ft. threeDwall, Branches Wall Panels bring affordable elegance into any room. Made of natural plant fibers, these panels can be used to build visually striking feature walls and wainscots, cover damaged walls or enhance the look of your ceilings. Panels are very easy to trim and paint. Combination of design and color will add a new dimension to any traditional, contemporary or transitional rooms.
Actual Product Height (in.) | 32.40 in |
|---|---|
Actual Product Thickness (in.) | 1.000 in |
Actual Product Width (in.) | 21.60 |
Nominal Product Length (ft.) | 2-2/3 |
Nominal Product Thickness (in.) | 1 |
Nominal Product Width (ft.) | 1-15/16 |
Total Coverage Area (sq. ft.) | 32 sq ft |
Application | Ceiling, Wall |
|---|---|
Board Joint Type | Square Edge |
Color Family | White |
Color/Finish | White |
Finish Type | Unfinished |
Installation Type | Glue |
Interior/Exterior | Interior |
Material | Composite |
Number per Package | 6 |
Paneling Appearance | Geometric |
Paneling Appearance | Geometric |
Paneling Features | Formaldehyde-free |
Paneling Profile | Flat |
Paneling Type | Tileboard |
Product Weight (lb.) | 1 lb |
Returnable | 90-Day |
Manufacturer Warranty | No warranty |
|---|
No, it wouldn’t support it
Yes, you can still put a mirror on the panel.
It would be difficult to hang anything on top of these panels. The panels are not flat. The texture is raised about 2 inches and made of rigid plastic. If it is possible to end the panel and mount the mirror to the dry wall, then continue with another panel on the opposite side of the mirror, it might work.
Yes, these are flexible.
I have installed this panel on several walls and would NOT recommend for curved walls.
I put mine on a hall wall where I don't really need the outlets. So I cut out squares for the outlets, put masking tape over those squares, and then painted the masking tape the same color as the panels (smoky cobalt). That way, if for some reason I need access, I can remove the masking tape. But I haven't needed to do that and, unless you know, you can't see the cutout squares.
You can easily cut it with a box cotter.
The panel is hollow making it difficult to box around a switch or outlet. Layout the paneling on the wall to avoid those locations. An option would be to disconnect and blank off those items so the panel can go over them. Relocate or add new switches and outlets.
There will be un-even at the cut out on the deco panel. So, you will need to make a plate of 1" thick x 1/8" larger than your electrical plate with MDF or other smooth materials to fill the un-even gap created by the deco panel, then install the electrical plate on top that 1" plate.
You get 6 pieces. 6 each.
6 individual 32.4 x 21.6 in each box.
Hi, thank you for your interest. Each panel is 32.4 X 21.6 inch. There are 6 panels covering 32 sq.ft in a box. Thanks.
6 of 32.4 inch x 21.6
It’s pretty fragile and like a hard cardboard so I wouldn’t recommend using it on a stair riser. We have it on a wall where it’s not touched and looks fabulous. We did find the glue didn’t work and had to use small nails to et it to stay up
Hi, thank you for your interest. This product can be applied in the wall. It is thin. The thickness is around 0.1". Thanks.
Hi, this wall panel can not be used in a bathroom. Thanks.
The panel is fibrous and it appears can absorb water. It can be used in the tub area only if it will not be in direct contact with water.
No corner piece, we used white trim that is water proof as corners and boarders.
There is no corner molding. It's made so the negative parts are flat so it touches the surface being attached to. I used glue and I didn't need any corner molding.
Hi, it is 31.4in.(L)x 24.6in.(W)x 1in.(D). Thanks.
Viewing 1-8 of 114
4.4 out of 5