#1 Home Improvement Retailer

Internet # 204273973

Model # 802427

Store SKU # 725602

1/4 in. x 36 in. Plain Steel Round Rod

$4.93
  • Steel construction for longevity
  • Works as a plant stake, tent peg, dowel pin, or axle
  • Cut to get the required length
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

These round rods are thread less circular rods in fixed lengths. Commonly used as plant stakes, tent pegs, dowel pins, or axles. Available in various sizes and materials. Round rod can be cut to specific length requirements with any metal saw.

Highlights

  • 1-piece per pack
  • Steel construction
  • Plain finish
  • Dimension: 1/4 in. x 36 in.
  • Return Policy

Product Information

Internet # 204273973

Model # 802427

Store SKU # 725602

Specifications

Dimensions: H 36 in, W 0.25 in, D 0.25 in

Dimensions

Product Depth (in.)0.25 inProduct Height (in.)36 in
Product Length (in.)36 inProduct Thickness (in.)0.25 in
Product Width (in.)0.25 in

Details

Connector CoatingN/ACorrosion ResistantNo
Fastener TypeMetal StockFinish FamilyUnfinished
Indoor/OutdoorIndoor/OutdoorMaterialSteel
Measurement StandardSAEMetal Stock TypeFlat/ Bars/Tube/Nonthreaded Rod
Package Quantity1Product Weight (lb.)0.49 lb
Returnable90-DayTube ShapeRound
TypeRod

Warranty / Certifications

Manufacturer Warrantynone

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

4.7 out of 5
  • 4.7 out of 850 reviews
  • 95% recommend this product
Filter by:
Showing 1-10 of 850 reviews
Needed to find a way to support pendaflex folders in some new cabinets. I was able to cut this product to size and fit perfectly
by
  • Verified Purchase
Great
Product is just what I needed and as advertised. Had an issue during shipping and was resolved quickly and professionally.
by
  • Verified Purchase
  • Recommended
Need to carry more in store
Husband uses them to make golf club holders
by
  • Verified Purchase
  • Recommended
What’s to rate about a plain steel rod? I cut it...
What’s to rate about a plain steel rod? I cut it down to 3’ and pounded it into the ground, to hold up spiral Christmas tree decorations. It works and looks great. But, you can’t see the plain steel rod.
by
    1 found this review helpful
    another quality product from the Home Depot
    I bought this to make a towel bar for my treadmill, which had no storage. It was easy to cut and worked perfect for my purpose. So far everything of this store brand has been good quality, no complaints..
    by
      • Recommended
      1 found this review helpful
      Good bar. Works for my M151A@ Vietnam War Jeep...
      Good bar. Works for my M151A@ Vietnam War Jeep
      by
      • Verified Purchase
      A bit overpriced, very oily (bring gloves to the store with you if you buy this), not especially ...
      A bit overpriced, very oily (bring gloves to the store with you if you buy this), not especially round (might not work as a shaft material), but worked for my use (cut into small rollers to move a heavy lathe across a concrete floor).
      by
      • Verified Purchase
      1 found this review helpful
      Was perfect for my gate...
      Was perfect for my gate...
      by
      • Verified Purchase
      • Recommended
      2 found this review helpful
      Good quality steel. Was very straight no dents.
      Good quality steel. Was very straight no dents.
      by
      • Verified Purchase
      • Recommended
      This is a plain hot-rolled steel rod, most likely close to A36 spec. Measured diameter is .366, ...
      This is a plain hot-rolled steel rod, most likely close to A36 spec. Measured diameter is .366, which is pretty far off from the spec'd .375 inch. It has a rough pitted surface. It is a basic piece of steel for general use. I would not use it in any project that had any mechanical load requirements. For example it would make a good axle for a small cart, and it's good in a pinch for making quick steel parts. I chucked this up in my lathe to make a small non-critical replacement pin for another machine, and it worked as a functional piece. If you just need a piece of steel rod for a quick project, this will do.
      by
      • Recommended
      9 found this review helpful
      Showing 1-10 of 850 reviews

      Compare Similar Items

      current item

      Product Length (in.)

      36 in

      72 in

      36 in

      48 in

      Product Thickness (in.)

      0.25 in

      0.25 in

      0.4375 in

      0.375 in

      Product Width (in.)

      0.25 in

      0.25 in

      0.4375 in

      0.375 in

      Tube Shape

      Round

      Round

      Round

      Round

      Material

      Steel

      Steel

      Steel

      Steel