1/2 in. Sweat Inlet x 3/8 in. Compression Outlet Multi-Turn Angle Valve with 5 in. Extension Tube & Bell Flange
- Multi-turn function enables easy control of water flow
- Heavy-duty brass structure is resistant to corrosion
- Chrome finish protects it from rust and tarnish
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Ask about this product
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Product Details
About This Product
BrassCraft 1/2 in. Nominal Sweat Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve with 5 in. Sweat Extension Tube controls water flow to household plumbing fixtures - faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Includes bell escutcheon for clean professional look.
Highlights
- Compatible with copper
- Machined, 1-piece body construction for strength, durability and long-lasting performance
- Easy-to-remove handle protects against accidental operation during rough-ins
- Multi-turn operation means water flow control with only a few turns of the handle
- Oval-knurled handle provides a secure grip for on/off operation
- Chrome-plated brass
- Temperature rating: 40° to 160°F
- Pressure rating: 125 psi maximum
- No-lead certified
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1
- Return Policy
Product Information
Specifications
Dimensions
Inlet Diameter (In.) | 1/2 |
|---|---|
Outlet Diameter (In.) | 3/8 |
Product Length (in.) | 2.375 in |
Details
Application | Potable Water |
|---|---|
Color/Finish | Silver |
Compatible Pipe Material | Copper |
Compatible Product | Faucet |
Connection | Sweat x Comp |
Features | Lead Free |
Indoor/Outdoor | Indoor, Outdoor |
Material | Brass |
Maximum Pressure (PSI) | 125 PSI |
Maximum Working Temperature (F) | 160 |
Pack Size | 1 |
Returnable | 90-Day |
Valve Configuration | Angle |
Warranty / Certifications
Manufacturer Warranty | Limited Manufacturer Warranty |
|---|
Questions & Answers
Do you make a fitting that doesn't have a paper thin flange that rusts out in less than 2 years? BTW same thing happened to the chrome finish on the pipe as well.
We are sorry to hear of your experience with our angle valve. We would like to help you resolve your problem. Please call one of our Customer Service Representatives toll-free at 877-272-7755. Thank you for letting us know you had an issue. We look forward to assisting you.
can i cut this down to 3 inches
Helli Hugh, Yes, you can cut it but remember to smooth out the edges afterwards for the end to be used. Thank you, BrassCraft
Yes you can, however you have to put a copper pipe in it all the way and then cut it, otherwise you will destroy it. The pipe material is so thin that cutting it without interior support will destroy it. I?m wondering how long this paper thin pipe will la
Can you remove (unscrew?) the extension tube from the valve assembly? I have a similar shut off valve in my toilet coming up through the floor tile. I need to replace this tile so I'm wondering if I can make a small hole in the new tile so that I can slide through the extension tube, put the tile in place and than put back the valve on the extension tube.
Hello Matt-Thank you for your question, the extension tube is factory installed and is not removable from the valve body. If the extension tube is too long, you may trim it down. Call our Customer Support Team at 877-272-7755 if there is anything we can help you with.
I have a Brass Craft valve similar to the unit shown feeding a toilet. I need to check the actual size. My valve is leaking when opened, and I do not know how to get this apart. When this was originally installed did the extension slide over a copper stub, if so where is it soldered? Can I unscrew the valve behind the handle and replace what is probably a rubber seal ? Does Home Depot sell repair parts ?
Hi Jim, we would need more information in order to properly advise you on your questions. Please contact our Customer Support Team at 877-272-7755 and we would be happy to assist.
Can the extension be trimmed with a pipe cutter and connected to PEX with a push fitting?
Yes it can be CUT , BUT it needs to be cleaned, reamed, fluxed and solder properly to 1/2" copper properly!!!!
It can be cut,but you'll never get a push fitting on it.
How is this valve installed? I've been told that the supply must been all the way in extension! Special soldering procedures1
as FAR as you can get it before you start burning the wall with your torch .Weather you cut it or not you must clean inside with wire brush, ream end inside and out ( for best results ) flux, then solder. Some like to pre-tin the copper or use a pre-tinning flux, the flange should be tested to wall in order to hide joint.
Thank you for your question, T9461. The BrassCraft Multi-Turn Valve with Extension Tube is intended to be installed over a copper water supply pipe. The inside of the chromed tube will be soldered to the outside of the copper piping. The copper supply tube does not need to be inserted all the way to the supply stop. The installation requires that at least 1 In. of copper tubing be inserted into the chromed tube for adequate support and attachment. For further detail, please do not hesitate to contact our Product Experts toll free at 877-272-7755.
Copper stub should go in at least 1/2" but doesn't need to go all the way in the fitting. The valve is sweat so it needs to be cleaned and soldered.
Viewing 1-6 of 6
Customer Reviews
4.1 out of 5
Loading Recommendations
Related Products
1/2 in. Sweat Inlet x 3/8 in. Compression Outlet Chrome-Plated Multi-Turn Angle Valve
BrassCraft 1/2 in. Nominal Sweat Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures - faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the floor. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home.
1/2 in. FIP Inlet x 3/8 in. Compression x 1/4 in. Compression Dual Outlet Multi-Turn Valve
BrassCraft 1/2 in. FIP Inlet x 3/8 in. O.D. Compression x 1/4 in. O.D. Compression Dual Outlet Multi-Turn Valve controls water flow to household plumbing fixtures. The dual outlet allows two independent supply lines to be attached to a single valve. Ideal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply. With a few turns of the valve handle, you can stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
1/2 in. FIP Inlet x 3/8 in. O.D. Compression x 3/8 in. O.D. Compression Dual Outlet Multi-Turn Valve
If you need to add an existing water supply for things like a dishwasher, ice maker or instant hot water dispensers this Multi-Turn Valve serves that purpose. With a few turns of the valve handle, you can stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Its purpose is to controls water flow to household plumbing fixtures.
1/2 in. Nominal Comp Inlet x 3/8 in. OD Comp x 3/8 in. OD Comp Dual Outlet Dual Shut-Off 1/4-Turn Angle Ball Valve
BrassCraft 1/2 in. Nominal Compression Inlet x 3/8 in. OD Compression x 3/8 in. OD Compression Dual Outlet, Dual Shut-Off 1/4-Turn Angle Ball Valve controls water flow to household plumbing fixtures. The angle valve is most often used where the water pipe enters the room from the wall. The dual outlet allows 2 independent supply lines to be attached to a single valve. The dual shut-off allows you to turn off the water to one source while working on another. Ideal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply. with a 90 turn of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
