Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
BrassCraft 1/2 in. Nominal Sweat Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures - faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the floor. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home.
Inlet Diameter (In.) | 1/2 |
|---|---|
Outlet Diameter (In.) | 3/8 |
Product Length (in.) | 2.75 in |
Application | Potable Water |
|---|---|
Color/Finish | Deep Yellow |
Compatible Pipe Material | Copper |
Compatible Product | Faucet |
Connection | Sweat x Comp |
Features | Lead Free |
Indoor/Outdoor | Indoor, Outdoor |
Material | Brass |
Maximum Pressure (PSI) | 125 PSI |
Maximum Working Temperature (F) | 140 |
Pack Size | 1 |
Returnable | 90-Day |
Valve Configuration | Angle |
Manufacturer Warranty | Limited Manufacturer Warranty |
|---|
Thank you for your question. We would require more information to determine if our water stops is designed for that use. Please contact our Customer Support Team at 877-277-7755 and reference this review.
This one is metal
Hello, Thank you for your question. We would require more information to determine if our Valve (or other product) is designed for that use. Please contact our Customer Support Team at 877-277-7755 and reference this review.
Hi boyyetp - We appreciate your question and would like to gather more information from you to best assist you. Please contact one of our Customer Support Team Members at 877-272-7755 and reference this review.
Hi Lily, thank you for your question. Turn off your water supply and then remove the screw from the handle and take the handle off the stem. Then, remove the bonnet/packing nut at the base of the handle. Once you have removed the handle and bonnet nut, remove the washer packing underneath the bonnet nut. Then you can unscrew the stem and remove it from the valve body. Insert the new stem, bib washer side in, and screw it into place. Then replace the washer packing, slide on the bonnet nut, and tighten it down. Lastly, put the handle back on and screw it in place. Turn your water back on and test your stop for leaks. Please contact our Customer Support Team at 877-272-7755 with any other questions.
Viewing 1-4 of 4
4.7 out of 5