#1 Home Improvement Retailer

Internet # 202196530

Model # 2471-20

Store SKU # 187654

Product Images

Top Rated

M12 12V Lithium-Ion Cordless Copper Tubing Cutter (Tool-Only)

Limit 5 per order
$179.00
Apply Now
Pay $154 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card
  • Powerful 500 RPM. motor cuts up to 10 times faster than others
  • REDLITHIUM Battery Technology provides long-lasting performance
  • Versatile cutting mechanism adjusts from 3/8 to 1 inch tubing
  • View More Details

Free & Easy Returns In Store or Online

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

The MILWAUKEE M12 Copper Tubing Cutter is the industry's first cordless unit, cutting up to 10X faster than conventional tubing cutters. Milwaukee engineered this versatile copper tubing cutter for plumbers, mechanical contractors, and remodelers that runs at 500 RPM. for unmatched cutting speed. The M12 Battery (sold separately) and ultra-efficient gearing allow users to make up to 200 cuts on a single charge. The patent-pending cutting mechanism automatically adjusts diameter to cut Type K, L, and M copper pipes from 3/8" to 1" (OD from ½" to 1-1/8"). The unique rotating cutting head cuts installed copper piping with as little as 1-1/2" clearance, and the lightweight, the inline design provides users with a longer reach and reduces wrist strain when working in confined spaces. A built-in LED light illuminates the cutting surface. The electronic overload protection and unibody construction provide maximum durability. An onboard, real-time battery fuel gauge helps users monitor the charge precisely, so there's less downtime on the job.

Highlights

  • Cuts copper tubing with as little as 1-1/2 in. of clearance
  • Powerful 500-RPM motor: Cuts up to 10X faster than conventional cutters
  • Metal Cutting Head is corrosion and rust resistant and sealed for water protection
  • Electronic Overload Protetion along with uni-body construction for increased durability
  • Inline Design reduces wrist drain in confined spaces
  • Built-in LED light illuminates the lie of cut for better visibility
  • 5 Year Tool Warranty
  • Uses a 12-Volt lithium ion battery (not included)
  • Compatible with all M12 batteries and chargers
  • Includes: (1) 2471-20 M.12 lithium-ion cordless copper tubing cutter
  • Shop All Milwaukee Tools
  • Click here for more information on Electronic Recycling Programs
  • Return Policy

Product Information

Internet # 202196530

Model # 2471-20

Store SKU # 187654

Specifications

Dimensions: H 4 in, W 2.3 in, D 13 in

Dimensions

Product Depth (in.)

13 in

Product Height (in.)

4 in

Product Width (in.)

2.3 in

Details

Batteries Included

No

Battery Amp Hours

No Battery

Battery Size

Lithium Ion

Battery/Charger

Tool Only

Charger Included

Charger Not Included

Color Family

Red

Compatible Pipe Material

Copper

Cordless Tool Type

Copper Tube Cutter

Cordless/Corded

Cordless

Included

Tool Only

Motor Type

Brushed

Number of Total Batteries Included

0

Pack Size

1

Pipe Cutter Type

Electric

Power Tool Features

No Additional Features

Power Type

Cordless

Product Weight (lb.)

2.8 lb

Returnable

90-Day

Tools Product Type

Power Tool

Variable Speed

No

Warranty / Certifications

Manufacturer Warranty

5 Year Limited Tool Warranty

Questions & Answers

Can this press cut and crimp 2 0 wire with the proper jaws
ByOct 10, 2026
1 Answer | 
Answer This Question

No. The M12™ FORCE LOGIC™ Press Tool Kit w/ ONE-KEY™ with 1/2"–1" CTS-V Jaws (2573-22) is a plumbing press tool designed for press fittings on copper, PEX, black iron, stainless steel, and ACR piping systems. It is not an electrical crimping or cable-cutting tool.

By|Oct 13, 2026


    can it cut ACR copper pipe?
    ByOct 6, 2026
    1 Answer | 
    Answer This Question

    Yes. The M12™ Copper Tubing Cutter Kit (2471-22) is designed to cut Type K, L, and M copper tubing from 3/8" to 1" OD.

    By|Oct 6, 2026


      Will the Milwaukee tubing cutter work on copper nickel pipe as well?
      BySep 20, 2026
      1 Answer | 
      Answer This Question

      No, it is not recommended.

      By|Sep 22, 2026


        Will the Milwaukee 12V tubing cutter work on 1/2” as well as 3/4” copper tubing
        BySep 13, 2026
        1 Answer | 
        Answer This Question

        Yes, the M12™ Copper Tubing Cutter (2471-20) is designed to cut Type K, L, and M copper tubing from 3/8" to 1" nominal size, including both 1/2" and 3/4" copper tubing.

        By|Sep 15, 2026


          What isle
          BySep 9, 2026
          0 Answer | 
          Answer This Question

          Will the charger work with a 220V outlet?
          ByAug 10, 2026
          1 Answer | 
          Answer This Question

          No — the Milwaukee M12 charger included in that combo kit is rated for 120V AC only (North American standard).

          By|Aug 10, 2026


            Is this tool compatible with Viega Propress fittings?
            ByJul 27, 2026
            1 Answer | 
            Answer This Question

            The M12 FORCE LOGIC Press Tool itself is an industry-standard tool, but compatibility with Viega ProPress fittings depends on the jaws included in your kit. Most M12 kits ship with M-jaws for copper unless specified otherwise. Viega requires V-profile jaws for full spec compliance.

            By|Aug 8, 2026

              (1)

              What is the crimping force for m12 and m18
              ByJun 26, 2026
              1 Answer | 
              Answer This Question

              Great question — Milwaukee’s FORCE LOGIC™ Copper Press Tools differ in force output between M12 and M18 platforms. The M12 FORCE LOGIC™ CTS Copper Press Tool (2473 Series): Crimping Force is 5,400 lbs (24 kN) and it optimized for compact, overhead and service work. The M18 FORCE LOGIC™ Press Tools (2773/2922 Series) Crimping Force is 7,200 lbs (32 kN) and is best for commercial and high-volume installs.

              By|Jun 26, 2026


                Viewing 1-8 of 129

                Customer Reviews

                4.5 out of 5

                • 4.5 out of 2,306 reviews
                • 77% recommend this product
                Filter by:
                Showing 1-10 of 2,306 reviews
                My most-used drill/driver set: compact, with plenty of torque
                I run M18 FUEL for my saws, but for drilling and driving I went with this M12 FUEL kit, and it's the set I reach for most. Impact driver: Plenty of torque, and way easier to use one-handed in tight spots. I used it to lay a 1/2" OSB storage floor in my garage attic, driving #8 x 2" screws into the truss chords between the webs. Hammer drill: I've used it to drill weep holes and install shelving w/ tapcons. What's in the box: the hammer drill, the impact driver, one XC4.0 and one CP2.0 battery, and a charger. Bottom line: M12 FUEL for drill/impact, M18 FUEL for 90% of everything else if you can justify the money. I've always been a quality > quantity guy. Buy once, cry once.
                by
                  • Recommended
                  Great tools for around the house work. Used to assemble some custom stuff aswell and they work great. The included batteries work fine and well but throwing the 5.0 battery on the drill does help.
                  by
                  1 found this review helpful
                  it took me a minute to realize that if you over squeeze when trying to cut 1/2" then the motor just spins and doesn't actually cut it. Once I got that sorted though it works like a charm. So far only used on 1/2" and 3/4" copper lines
                  by
                  This customer chose to rate the product and not provide text.
                  by
                  Bad quality control
                  My drill looks like someone was wrenching on it, should I be concerned with this defect?
                  by
                  Response from Milwaukee ToolSep 1, 2026
                  Thank you for taking the time to leave a review on your M12 FUEL 12-Volt Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit w/2 Batteries and Bag (2-Tool) and we are sorry to hear about your experience. Can you please send our team a message at social.media@milwaukeetool.com? Thank you - Milwaukee Tool Social Team
                    1 found this review helpful
                    This customer chose to rate the product and not provide text.
                    by
                    This drill set is perfect for me, they are lightweight, compact, and high quuality just what i need.
                    by
                    The Milwaukee M12 FUEL Brushless tool was simple to set up, and installing the battery at the end was quick and effortless. The brushless motor delivers strong performance, and the compact size makes it perfect for small jobs around the house or workshop.runs smoothly and has strong output for its compact size. Very reliable for everyday tasks.
                    by
                    This customer chose to rate the product and not provide text.
                    by
                    Wanted to get durable tools and liked the size and battery options for these. Just used for a few tiny projects so not able to assess tools right now.
                    by
                    Showing 1-10 of 2,306 reviews

                    Compare Key Features

                    current item

                    Product Snapshot

                    Ideal for professionals needing fast, automatic cutting in tight spaces, ensuring efficiency.
                    Ideal for professionals wanting fast, precise copper cuts in tight spaces, ensuring efficiency.
                    Ideal for professionals needing burr-free cuts in tight spaces with cordless convenience.
                    Ideal for professionals who want fast, automatic copper cutting in tight spaces.

                    Cutting Capacity

                    1-1/8 in. OD
                    3/8 in. to 1 in. copper pipe
                    2 in.
                    1-1/8 in. OD

                    Blade Material

                    Corrosion and rust resistant metal
                    Corrosion, rust resistant metal
                    Stainless steel
                    Corrosion and rust resistant metal

                    Ratcheting Mechanism

                    Replaceable Blades

                    Close-Quarter Cutting