Exclusive
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
The Milwaukee Hole Dozer Hole Saw features Rip guard, the strongest tooth form in the industry, backed by the Rip guard limited lifetime tooth break warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100.
Bit Diameter | 1/4 in |
|---|---|
Bit Length (in.) | 1.62 in |
Drilling Depth (in) | 1.8 |
Hole Saw Diameter (in) | 2-1/8" |
Shank Diameter | 1/4 in |
Arbor included | Yes |
|---|---|
Arbor Size | 1/4 in |
Bit Material | Bi-Metal |
Drill Bit Type | Hole Saw |
Drill Bit Type(s) Included | Hole Saw |
Included | Arbor, Pilot Bit |
Individual/Set | Individual |
Material Application | Aluminum, Plaster, Steel, Wood, Wood with Nails |
Min Chuck Size Required | 3/8 In. |
Returnable | 90-Day |
Shank Style | 3-Flat |
Teeth Per Inch | 8 |
Tools Product Type | Power Tool |
You might have forgotten to use the locking pins
No, this is not intended to cut through ceramic tile. For ceramic tile, use a tile-specific solution such as the 1-1/4" Carbide Grit Hole Saw (49-56-0422) or a Diamond MAX™ hole saw.
In practice, the finished hole can vary slightly depending on the material and drilling conditions, but the nominal size is 6".
Yes, the 2" HOLE DOZER™ Bi-Metal Hole Saw with Arbor will work with plastic, which will include polycarbonate.
No — the 1-1/4" Hole Dozer Bi-Metal Hole Saw is optimized for metal and wood and not recommended for fiberglass showers.
Hi, Andrew. There isn’t a separate “locking button” feature. The lock is achieved by the arbor’s drive pins and threaded collar. If the saw is spinning, re-seat the pins and fully tighten the collar. For 6" holes, the 7/16" arbor is recommended over the 3/8". For more information, please message us at Social.Media@MilwaukeeTool.com.
The Bi-Metal Hole Saw can cut wood, metal, plastic and composite materials such as laminate or fiberglass.
Viewing 1-8 of 192
4.4 out of 5