10 lb. Round Base Pull Latch Magnets (2-Piece per Pack)

While the product description doesn't explicitly state its use for locating studs in lathe and plaster walls, a strong magnet like the 65 lb. Heavy Duty Round Pull Magnet can often be used for this purpose. Here's how it works: Detecting Metal Fasteners: Lathe and plaster walls are constructed with wooden laths nailed to studs. These nails are typically made of ferrous metal, which magnets can detect. Scanning the Wall: Slowly move the magnet across the wall surface. When the magnet passes over a nail or screw embedded in a stud, you should feel a pull or attraction. Marking Stud Locations: Once you feel a pull, mark the spot. Continue moving the magnet vertically to find other fasteners along the same line, which will help you confirm the stud's location and direction. Keep in mind that the effectiveness can vary depending on the thickness of the plaster and the depth of the fasteners.

They could be an excellent magnet for holding tools to the bbq depending on the size of the tool, how thick the metal is and how much contact is has with the magnet. The pounds pull of this magnet is measured by how much force it takes to pull the magnet off of a flat metal surface.

The assembly is slightly magnetic on the back of the steel housing. The magnet inside the housing is magnetic on both sides.

Hi Home Depot Customer, This 65 lb. Heavy Duty Round Pull Magnet is designed for hanging or lifting objects up to 65 lbs. It is specified for indoor uses and is suitable for applications such as hanging plants, lights, or keys.

Hi Home Depot Customer, This 65 lb. Heavy Duty Round Pull Magnet is designed for hanging or lifting objects up to 65 lbs and is specified for indoor uses. While it has a strong pull capacity, using it to secure a light bar on a car, especially on a highway, is not recommended. The dynamic forces encountered on a vehicle, such as wind resistance, vibrations, and potential impacts, are significantly different from typical indoor applications. These forces could exceed the magnet's intended holding capabilities in such an environment, potentially causing the light bar to detach. For securing items to a vehicle, particularly for highway use, it is advisable to use mounting methods specifically designed for automotive applications that provide a more permanent and secure attachment.

Hi Home Depot Customer, This magnet is bipolar, meaning it has two poles, a north and a south pole. All magnets inherently have at least two poles; monopoles do not exist.

"Hi Home Depot Customer, The magnet material, iron ferrite, is inherently resistant to rust. However, the product also features a durable metal finish. The provided information does not explicitly state that the entire product, including its metal components, is rust-proof. AI GENERATED ANSWER. "

"Hi Home Depot Customer, Yes, there is a hole in the middle of the magnet. It is not threaded but can accommodate a 1/4 inch bolt for applications such as attaching it to wood or other surfaces. AI GENERATED ANSWER. AI generated answer to your question."