Top Rated

Return this item within 7 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
The Everbilt 1/2 HP submersible sump pump is built with an aluminum motor housing for efficient motor cooling. The pump is available with a vertical float switch requiring an 11 in. to 18 in. minimum diameter wide sump basin. The motor is built with thermal overload protection. The pump comes with a 1-year limited warranty.
Dimensions: H 10.63 in, W 8.66 in, D 8.66 in
Product Depth (in.) | 8.66 in |
|---|---|
Product Height (in.) | 10.63 in |
Product Width (in.) | 8.66 in |
Amperage (A) | 15 |
|---|---|
Cord Length (ft.) | 8.25 |
Discharge Flow @ 0 ft. (gallons/hour) | 2820 |
Discharge Flow @ 0 ft. (gallons/min) | 47 GPM |
Discharge Flow @ 10 ft. (gallons/hour) | 2400 |
Discharge Flow @ 10 ft. (gallons/min) | 40 GPM |
Discharge Flow @ 15 ft. (gallons/min) | 35 |
Features | Bottom/End Suction, Non-Clogging, Self-Priming, Solids Handling, Thermal Overload Protection |
Housing Material | Aluminum |
Impeller Material | Plastic |
Maximum Horsepower (hp) | 1/2 |
Maximum Pressure (PSI) | 10.82 |
Maximum Working Temperature (F) | 100 |
Minimum Sump Basin Diameter | 11 to 14 |
Minimum working temperature (F) | 35 |
Outlet Diameter Connection (in.) | 1-1/2 FPT |
Pack Size | 1 |
Product Weight (lb.) | 9.15 lb |
Pump Switch Type | Vertical |
Returnable | 7-Day |
Switch-On Height (in.) | Low (0-5 in.) |
Vertical Lift (ft.) | 25 |
Voltage | 115v |
Certifications and Listings | CSA Certified |
|---|---|
Manufacturer Warranty | 1 year |
Beau Thank you for your question. No, this is a sump pump designed for rainwater. You will need to use a Sewage Pump in this application. The Sewage Pump is designed to pump up to a 2" solid, which is plumbing code. Regards, Everbilt Customer Service
Larry, Thank you for your question. For stationary applications, we would recommend using PVC pipe with sump pump. Regards, Everbilt Customer Service
driftin, Thank you for your question. We are the manufacturer. You will need to work directly with the store and ask them to reorder or carry. We have inventory in our warehouse and can ship to the store or the store can replenish from their warehouse. Regards Everbilt Customer Service
Kathy, we do have submersible pumps that a garden hose can attach to. They would be one of our utility pumps. Two models I would look at would be the SUP80 or EBAU33. Please contact our customer service if you have any questions about either of these pumps or to discuss your application. 844-883-1872. Regards, Everbilt Customer Service
is the switch getting "hung up" on debris or anything in the basin? Please contact our experts at 844-883-1872 to receive a live person to speak with about the situation as they can walk you through getting everything running smooth again. Thanks.
Mine last 3 years, after that I just go and buy a new one. It’s possible your float assy might be causing your condition.
I had no problem replacing it.
jimboli, Thanks for your interest in this pump. The best thing to do in this situation would be to contact our professionals at 844-883-1872. They can help you through your situation and make sure the pumps used are correct for the situation. Thanks.
Check your manual again I'm pretty sure these pumps are already pre-set
Fred, Although the rubber stops on the pump float switch can be adjusted, this is not something that is recommended to do. Please contact us at 844-883-1872 for additional questions.
Yes the float can be adjusted and maybe necessary depending on your situation. In my case the pump would not shut off because water remaining in the sump hole prevented the float from dropping far enough to engage the shut off switch. I moved the rubber housing on the bottom of the float rod approximately 1 inch and now the pumps shuts off every time.
Not sure I did not read the manual yet but I'm pretty sure it's preset
NO it cannot
The mounted float switch is not designed to be moved to the other side of the pump. Thanks.
Viewing 1-8 of 22
4.3 out of 5