$190
- Commonly used for anchor bolts, clamps, hangers or u-bolts
- Features long-lasting durable steel construction
- Includes one rod
Product Details
Scale indicates the resistance to damage caused by outside elements.
Scale indicates the complexity of the welding process.
Scale indicates the complexity of the machining and grinding process.
Scale indicates the complexity of the bending and forming process.
Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required. Everbilt exclusively offers a variety of sizes, diameters and lengths to suit the individual needs of your job or project. These rods are also frequently known as threaded studs, and can be cut to customized length using any metal saw for convenience.
- 1-piece per pack
- Steel construction
- Zinc-plated
- 5/16 in. x 12 in.
- Note: Product may vary by store
- Return Policy
Specifications
Questions & Answers
122Questions
Q:Is this Grade A better than Grade 36 or 55 (f1554). I'm using them to bury in concrete footings to anchor down steel Columns of a building
by|Jan 20, 2023
1 Answer
Q:What is the TPI of the 5/16 in X 72 in zinc threaded knob?
by|Jan 20, 2023
1 Answer
Q:Could this rod be use on a tow behind dump lawn tractor as an axle
by|Jan 2, 2023
1 Answer
Q:Pushing this rod through an 800 lbs round bale of hay, hooking a chain to both ends will it stand up to being pulled?
by|Oct 17, 2022
3 Answers
Showing 1-4 of 122
Aug 10, 2022
Light protection
I bought this sheet of metal to help protect the new yard light I installed from direct sunlight and snow. I hope it works as planned.
by
Jul 3, 2022
Needed 3/4" by 6 inch bolts but this was an adequate substitute for my purpose
I was building a jig to compress mending plates to wood for trusses and was trying to get 3/4" x 6" bolts but couldn't find them at the time so I opted for threaded rod and cut them to size in my shop. They did the job nicely and accomplished the same result using 3/4"-10 nuts and lock washers.
by
May 4, 2021
Cant say much about the manufacturer's intended purpose of this threaded bar, only about mine. G...
Cant say much about the manufacturer's intended purpose of this threaded bar, only about mine.
Grabbed a piece of this 36" 3/4 - 10 bar. A few corresponding nuts and washers accompanied it.
Cut bar in half, added a few pieces of lumber cut to specific dimensions and wallah...a MOXON VISE was born. See pics
by
Nov 26, 2020
I bought this for my rotating tool stand,it was a little longer than I needed but I cut it down a...
I bought this for my rotating tool stand,it was a little longer than I needed but I cut it down and it works great!
by
Jun 12, 2020
Used with ceiling plate and split ring tubing hanger to...
Used with ceiling plate and split ring tubing hanger to create standoffs for copper pipe. Sturdy, all threads were fine, all good.
by
Mar 30, 2020
Very strong I built a rack for my wife jeans....
Very strong I built a rack for my wife jeans. It holds over 6 pair of jeans without bending.
by
Sep 17, 2019
DIY hanging shower rod
DIY hanging shower rod that will makes your bathroom look great and will not put a dent in your pocket.
by
Aug 13, 2019
We used the threaded rod on a ledger board installed under our home. The ledger board is used to...
We used the threaded rod on a ledger board installed under our home. The ledger board is used to hold steps leading down from our foundation. This foundation is 12 inches thick and was poured around 1915. We decided to drill through the foundation and use threaded rod to hold the board. We were not confident that the old concrete would accept anchors that bind in the concrete.
This idea worked perfectly as you can see in the picture.
by
Aug 10, 2019
For a general purpose piece of threaded rod, this is pretty good quality. It measured exactly 36"...
For a general purpose piece of threaded rod, this is pretty good quality. It measured exactly 36" long, thread pitch measured to spec. The zinc coating is good quality. Source is India.
It cuts easily with a hacksaw or bandsaw (I used a portable band saw). The threads on one end were banged up but that's easily fixed in 30 seconds with a grinder. I was able to sping a 3/4 nut from one end to the other with one finger, so the threads are good the whole length.
I used this to draw a new bearing on to the spindle in my lathe, it worked perfect. I'm sure I'll find a ton of other uses for it in the shop.
by
Aug 9, 2019
Everbilt 3/4 in. x 36 in. Zinc Threaded Rod I purchase them when holding doubles or triple 2 X 1...
Everbilt 3/4 in. x 36 in. Zinc Threaded Rod I purchase them when holding doubles or triple 2 X 12 floor joists to prevent them from separating. Just quickly take a disc cutoff 1/8” thick wheel and the threads cut easily with little or no damage for bolts to come off if necessary. There are many other uses. You local Home Depot had many more threaded rods in various diameters and lengths in the hardware section. If you don’t see what yo want go to Home Depot.com and have it shipped free to your local store.
by
Compare Similar Metal Rods
 |  |  |  | |
| Brand | Everbilt | Everbilt | Everbilt | |
| Name | 5/16 in. -18 tpi x 12 in. Zinc-Plated Threaded Rod | 3/8 in. x 12 in. Zinc Threaded Rod | 1/8 in. x 12 in. Zinc Key Stock | 3/16 in. x 12 in. Cold Rolled Plain Round Rod |
| Price | $193 | $197 | $210 | $293 |
| Ratings | (528) | (528) | (2) | (684) |
| Product Length (in.) | 12 in | 12 | 12 in | |
| Product Width (in.) | 0.3125 | 0.375 | 0.125 | 0.1875 in |
| Tube Shape | Round | Round | Square | Round |
| Thread Type | Threaded | Threaded | ||
| Material | Steel | Steel | Steel | |
| Product Thickness (in.) | 0.125 in | 0.1875 in | ||
| THD SO SKU | 247777 | 251264 | ||
| View Product | View Product | View Product | View Product |
Related Products
