#1 Home Improvement Retailer

Internet # 312395677

Model # 4100XC-10

Store SKU # 1005129734

10 in. Worksite Table Saw with Gravity-Rise Stand

$629.00
Apply Now
Pay $579.00 after $50 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Powerful 15 Amp saw has a wide 30 in. ripping capacity
  • Worksite table saw delivers 4.0 max HP to rip 4 Ft. sheet goods
  • Gravity-Rise Wheeled Stand provides mobility, easy set-up
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

The Bosch 4100XC-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4.0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed. It includes Constant Response circuitry to help maintain speed under load, restart protection to avoid accidental startup and overload protection. The SquareLock rip fence is engineered for maximum trueness and great ease-of-use. It includes an enhanced auxiliary fence for narrow workpieces. The lighter GTA47W Gravity-Rise Wheeled Stand has 8 In. treaded rubber-composite tires and a single-action design for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The Smart Guard System features a three-position adjustable riving knife, anti-kickback pawls and non-obstructed-view barrier guard assembly. The table saw provides a 30 In. x 22-1/2 In. tabletop with a 30 In. rip capacity for ripping 4 Ft. wide sheets goods in half.

Highlights

  • Powerful table saw - has 15-Amp saw with 4.0 max HP and 3,650 rpm, for rip-cutting and cross-cutting of fine and rough materials
  • Large cast aluminum top - provides increased work space and material support with a 30 In. ripping capacity
  • Soft-start circuitry - manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker
  • Constant Response circuitry - helps maintain speed under load
  • Restart protection - helps to avoid accidental startup
  • Portability - works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
  • SquareLock rip fence - engineered for enhanced clamping and trueness
  • Smart Guard System - riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
  • Onboard storage - allows for access to all included components
  • Arbor lock - permits easy blade changes, with arbor lock and blade wrench located onboard
  • Includes: (1) 4100 10 In. Worksite Table Saw, (1) Gravity-Rise Table Saw Stand, (1) 10 in. Carbide-Tipped Blade, (1) SquareLock Rip Fence, (1) Auxiliary Fence for Narrow Workpieces, (1) Miter Gauge, (1) Smart Guard System, (1) Push Stick, (1) Throat Plate Insert, (1) Multi-Function Blade Wrench, (1) Adjustment Wrench
  • Warranty - Limited 1 year
  • Click here to shop for more Bosch Tools
  • Click here for more information on Electronic Recycling Programs
  • Return Policy

Product Information

Internet # 312395677

Model # 4100XC-10

Store SKU # 1005129734

Additional Resources

Shop All Bosch

Specifications

Dimensions: H 19.4 in, W 29.4 in, D 37.7 in

Dimensions

Blade Diameter (in.)

10 in

Product Depth (in.)

37.7 in

Product Height (in.)

19.4 in

Product Width (in.)

29.4 in

Work Table Surface (in.)

in x in

Details

Amperage (A)

15 A

Bench & Stationary Tool Type

Table Saw

Blade Location

Centered

Color Family

Blue

Condition

New

Construction Material

Aluminum

Cord Length (ft.)

6 ft

Corded Tool Type

Table Saw

Cordless/Corded

Corded

Cuts Through

Wood

Depth Control

Adjustable

Horsepower (HP)

4 hp

Included Accessories

Stand

Maximum Cut Depth at 45 Degrees (in.)

2.5 in

Maximum Cut Depth at 90 Degrees (in.)

3.124 in

Maximum Speed (RPM)

3650 RPM

Maximum Table Tilt - Left (degrees)

0 °

Maximum Table Tilt - Right (degrees)

0 °

Power Tool Features

Blade Guard System

Product Weight (lb.)

110 lb

Returnable

90-Day

Rip Capacity - Left (in.)

8.5 in

Rip Capacity - Right (in.)

30 in

Saw Type

Jobsite

Tools Product Type

Power Tool

Warranty / Certifications

Certifications and Listings

UL Listed

Manufacturer Warranty

Limited 1 year

Questions & Answers

47Questions
caret
Q:Does the saw blade height adjustment lock the set height of the blade in place?
by|Apr 8, 2024
0 Answer
Answer This Question
caret
Q:Does Bosch make table extensions for this saw. Making it able to larger sheets of lumber?
by|Dec 26, 2023
1 Answer
Answer This Question

A:  The table has an extended extension. To extend the table, raise the table extension lock handle and slide the table extension to the desired width. To secure the table setting, lower the lock handle. We also offer optional support accessories: TS1016 rear outfeed support and the TS1008 left side support. For further assistance, you may email us at bosch.tools@us.bosch.com or contact us at 1-877-BOSCH99 (1-877-267-2499) from Monday through Friday, 7 a.m. to 7 p.m. CST.

by|Jan 6, 2024
    caret
    Q:Does this saw have a safety break ? finger safe technology like sawstop
    by|Nov 17, 2023
    1 Answer
    Answer This Question

    A:  Thanks for your question! Our 4100XC-10 has a Smart Guard System that consists of three key elements: an Adjustable (3-position) Riving Knife, Anti-Kickback Device, and Barrier Guard Device. All of these are part of a modular system that requires no tools to assemble or unassemble. This Guard System must always be in place and working properly for all thru-sawing cuts. Also, the Power Switch incorporates a locking hasp for use with a padlock to prevent accidental starting, and the featherboard helps prevent kickback. For further assistance, you may email us at boschtools@custhelp.com or contact us at 1-877-BOSCH99 (1-877-267-2499) from Monday through Friday, 7 a.m. to 7 p.m. CST.

    by|Nov 29, 2023
      caret
      Q:Is it possible to install only a riving knife.
      by|Oct 28, 2023
      1 Answer
      Answer This Question

      A:  Always use saw blade guard, riving knife and anti-kickback device for every through-cutting operation. For through-cutting operations where the saw blade cuts completely through the thickness of the workpiece, the guard and other safety devices help reduce the risk of injury. Immediately reattach the guarding system after completing an operation (such as rabbeting, dadoing or resawing cuts) which requires removal of the guard, riving knife and/or anti-kickback device. The guard, riving knife, and anti-kickback device help to reduce the risk of injury.For further assistance, you may email us at boschtools@custhelp.com or contact us at 1-877-BOSCH99 (1-877-267-2499) from Monday through Friday, 7 a.m. to 7 p.m. CST.

      by|Nov 3, 2023
        Showing 1-4 of 47

        Customer Reviews

        4.4 out of 5

        • 4.4 out of 225 reviews
        • 70% recommend this product
        Filter by:
        Showing 1-10 of 225 reviews
        Absolute garbage
        Owning this saw has been an absolute nightmare. It worked good for one job. After that, the plastic wheel that adjusts the blade height became stripped because it was so hard to turn.Since then it’s become impossible to adjust the height even with a wrench. Ive made many adjustments over the years to try and help the cheap plastic gears do their job. Ive lost more money and wasted more time trying to adjust the height, than the total value of the saw. Even a $100 ryobi works better than this.
        by
        Response from BoschToolsMar 21, 2024
        Thank you for your reivew. Home Depot is focused on ensuring complete customer satisfaction. As the manufacturer, we are very interested in supplying consumers with a quality product that delivers the expected performance. Anytime we hear problems encountered in the use of one of our products, we want to get involved and resolve the difficulties the best we can. For optimal performance do not allow sawdust to accumulate inside the saw. Frequently use a brush or air compressor to remove any dust that may accumulate inside the saw cabinet and the motor. For further assistance you may email us at bosch.tools@us.bosch.com or contact us at 1-877-BOSCH99 (1-877-267-2499) from Monday through Friday, 7 a.m. to 7 p.m. CST.
          Great saw
          The only assembly required is the gravity rise stand. Carefully following the assembly instruction, I had no problems with the finished project. The table saw easily sets upon the stand and aligns with the mounting holes. This stand allows you to roll the saw into the storage location as well as the work position when in the standing position. I'm totally impressed with the on board storage for all accessories. All held securely in place allowing you to collapse the stand and easily roll the complete assembly into storage location. An excellent table saw for the hobbyists as well as the contractor. I'd definitely recommend purchasing this saw.
          by
          • Verified Purchase
          • Recommended
          2 found this review helpful
          The Bosch 10 in. Corded Jobsite Table Saw with Gravity Rise Wheeled Stand is an outstanding porta...
          The Bosch 10 in. Corded Jobsite Table Saw with Gravity Rise Wheeled Stand is an outstanding portable woodworker's tool! Extremely well built, superb easily accessible safety features, well thought out storage features and a very effective, easy articulating integrated wheeled stand! The large and heavy unit came well boxed and provided great protection for all components. The major assembly time (1\2 hour) was the well engineered and solid gravity rise stand. Adding the saw and safety accessories (Blade Guard and Anti-Kick-Back Pawls attach to the quick connect Riving Knife) took less than 10 minutes. Checked the squareness of the fence to the table and blade...Perfect, no adjustments needed. The fence is durable extruded aluminum and locks in front first, then on the back side. Once locked in to your cut setting...It Doesn't Move!! The sliding front\back extruded aluminum rails extend the right table top out easily, allowing a full 25" of rip fence capacity. Now, Ready to make Sawdust! Went through over 150bf of shelving sheet goods and was Well Pleased at the power, ease, accuracy and edge finish of this Bosch 10" compact saw. Overall, it is a very stable platform through the cuts, with crosscut edges virtually as smooth as the rips! All safety features perform very well and the motor never seemed strained, even when we purposefully cut at fast feed rates! With a medium size shop vac (2.5" hose) attached to the 2.5" dust shroud port, I was able to capture 80-90% of the sawdust, keeping the work area relatively clean. Actually, the portability of this integrated table saw unit is equally impressive in performance as the saw unit itself! The articulating stand is Extremely Easy to collapse (for mobility) or extend (to make sawdust), with the saw being held as if on a HD dolly! The rip fence and miter gauge snap into either side of the saw base and stay put until needed. Keeping the safety attachments in place, the unit neatly stores 30" from a wall. If you remove the safety attachments (quick riving knife detachment function) and store separately, then the portable unit only takes up 24" of real-estate! Between great ergonomics, functional feature sets, solid build and excellent performance, the Bosch 10" Portable Table Saw System is not only a great jobsite tool, but a a DIY homeowners Dream!!
          by
          • Recommended
          21 found this review helpful
          by
          • Verified Purchase
          I use Bosch.
          I have 4 of these saws used at commercial construction jobs and every motor has had to have new motor bearings replaced and all are difficult to raise the blade to the point of the bevel gears failing and needing replacing. Other features are good and precise. The saws age ranges from 4 to 10 years old and I'm writing this review in hopes that Bosch will fix these common problems. I have 40 plus years of experience and want to continue using Bosch. All other Bosch tools I own are great. No reply necessary. I hope this helps.
          by
          Response from Bosch Tools Customer SupportMar 1, 2024
          Hi! Thank you for your review of the 4100XC-10 and your experience with the motors and bevel gears. Feedback from customers like yourself helps us identify needs for improvement for future enhancements. We will be sure to share this with our product team. We do apologize that the tool did not meet your expectations. If you would like to provide us with additional information, please email us at bosch.tools@us.bosch.com or contact us at 1-877-BOSCH99 (1-877-267-2499) from Monday through Friday, 7 a.m. to 7 p.m. CST.
            Excellent portable table saw. Easy to assemble.
            by
            • Verified Purchase
            Can't go wrong.
            Great saw, been using it as a shop saw and it rips and crosscuts almost as well as the 80lbs heavier "real shop saw" Adjustments are easy and rarely required. It's seen steady use for months now, at least 50 cuts a day, not one issue other then the knife needs occasional Adjustments. The safety features are well designed and it has the least vision blocking blade cover of and safety system I've used
            by
              • Recommended
              by
              • Verified Purchase
              I have almost every Bosch tool, and this saw is junk. The motor has gone twice, under almost no load. The repair facility said it was dusty underneath. It is a table saw. The stand is pretty good.
              by
              Response from Bosch Tools Customer SupportFeb 1, 2024
              Hi! Thanks for your review. As the manufacturer, we are very interested in supplying consumers with a quality product. We are sorry to hear about the issue you experienced fixing the motor twice. We do have technical support that is available to answer any questions. We encourage you to contact us at 1-877-BOSCH99 (1-877-267-2499) from Monday through Friday, 7 a.m. to 7 p.m. CST, or you may email us at bosch.tools@us.bosch.com, as we may have been able to assist with any concerns you had.
                Better off buying a used old saw that wont break.
                This is my second review for this product. this one at the 2+ year mark. The original stand that came with the saw was garbage and broke almost immediately. Since it was under warranty Bosch replaced it free of charge with a much better stand. I have not had any issues with the newer better stand since. Today I again experienced a failure. This time with part # 261095010 the "glide pad" on the fence. I only want one thing from my tools dependability. This one definitely does not have that.
                by
                Response from Bosch Tools Customer SupportJan 22, 2024
                Thanks for your review. We apologize that you cannot depend on the saw as much as you wanted to. As you know, the use of power tools can cause wear on the tool over time. We have the Pad #261095010 in stock if you would like to place an order for it to be replaced. Please visit our Spare Parts website, BoschToolService.com, or you may email us at bosch.tools@us.bosch.com or contact us at 1-877-BOSCH99 (1-877-267-2499) from Monday through Friday, 7 a.m. to 7 p.m. CST.
                  Showing 1-10 of 225 reviews

                  Compare Similar Items

                  current item

                  Cordless/Corded

                  Corded

                  Corded

                  Cordless

                  Corded

                  Rip Capacity - Right (in.)

                  30 in

                  30 in

                  24.5 in

                  32.5 in

                  Included Accessories

                  Stand

                  Stand

                  Allen Key/Wrench, Anti-Kickback Prawl, Charger, Stand

                  Stand

                  Power Tool Features

                  Blade Guard System

                  Blade Guard System, Lockout Power Switch

                  Blade Guard System, Lockout Power Switch

                  Blade Guard System

                  Blade Location

                  Centered

                  Centered

                  Centered

                  Centered