A:  absolutely

A:  No it not made for that. They do made one for natural gas it is flexible. For LP gas you need to use 3/8 inch soft copper with flare fitting if you do not know how to do hire a plumber

A:  Larry, I am confused. I want to connect my bbq Island Grill and side burners to NATURAL GAS, not for LP Gas. So can I use This BrassCraft 1/2 gas connecter

A:  Yes you can use it to connect the gas grill from the main gas line.

A:  Hello Shamin, Thank you for your question. This gas connector is for use on 4-burner gas ranges, cook-tops, dryers and water heaters, Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures. Most cities require a gas ball valve to be installed within easy reach, no more than 6 feet from the appliance. Always check your local codes to see if they differ. You should always ensure that use of this connector meets all Brasscraft application specifications. If you have any other questions, please contact our Customer Support Team at 877-272-7755 for assistance.

A:  yes, i would think so

A:  Hi Gt The CSSD64TE-48 X can be used for the following: Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures Use to install 4-burner gas ranges, cook-top, dryers and water heaters Thank You

A:  yes, that what i did

A:  Hello TJ - Thank you for your question. We would require more information to determine if our Connector is designed for that use. Please contact our Customer Support Team at 877-277-7755 and reference this review. Hello TJ, It sounds like you are trying to describe your appliance that has a sediment trap integrated into the appliances control valve. That sediment trap is a T fitting with three nipples that form the T shape of a sediment trap. For a sediment trap to work, the gas stream must cut a 90. I don’t see that in the note as I read it. So back to basics….. 1. There must be a manual shutoff within 6 feet of the furnace. 2. A sediment trap must have a “drop leg” and a “cap” 3. A gas connector can be attached to a sediment trap. 4. Sediment is separated by the gas turning a corner and sediment falling out. 5. For the exact configuration of the system, she/he needs to review local codes as there are different requirements by region. I received this information from our gas engineer/ Thank you, Dale W. BrassCraft

A:  Thank you for your question.The BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (60,500 BTU) is it made in the United States. Please contact our Customer Support Team at 877-272-7755 if you have any other questions.

A:  not sure but its well made and meets the standards

A:  I do not know, I already installed and discarded the package. Go to Home Depot and look at the packaging.

A:  This is made in Texas.