Roomside Series Decorative White 110 CFM Ceiling Humidity Sensing Bathroom Exhaust Fan with LED Panel, ENERGY STAR

My led lights isn’t working, do you have a led lights?

1. instructions are garbage. missing lots of little gotchas that wasted my time. 2. Color temp of the bulb is not Warm white aka 2700-3000 Kelvin. This is closer to 4300K cool white. My grey walls are blue now. 3. Replacement bulb costs more than the whole thing. Lookup part 1100623 for yourself.

We installed about 1 yr ago and the Led light is flickering. Can just the les part be replaced?

We purchased this light a month ago and noticed the actual LED light was missing in the box so we returned it for a new set up. We installed the new unit and it worked for a week and now half of the LED is out. This seems to be a common problem.

This fan is extremely quiet and much nicer than my old fan! The light is a perfect brightness for my bathroom as well. My installer had no problems putting it in. I'm glad I selected this model! I did not purchase a humidity sensor.. so I can't review that part of the fan.

This is the first time I installed a ceiling exhaust fan. I found the installation much easier than anticipated. I bought this model because the faceplate cover the existing hole in my ceiling. Another feature I find attractive is that the fan and light can be controlled by different wall switches. I leave the fan switch in the on position all the time. The humidity sensor will signal the fan to turn on once the humidity hits a certain level. I strongly recommend this product. I will need another one in the near future for my kids bathroom.

Overall I would give a positive rating for this exhaust fan-light but for one exception. The Pros: room-side installation and size of the unit, template on the side of the box, quietness (I don't believe it is 0.8 sones, but it's quiet enough). The Con - and it's a big one: the light is NOT "Warm White". It is advertised as being 3500K color temperature and it's not close to that. This is a bright white light (I'd guess 5000-6000K) and it's not working for me. If you look at the photos, you will see how "cool" this light is... not warm at all. I installed it in my lower level bath during a full remodel along with a SONNEMAN Lighting Tubo Slim LED Bath Bar that I have used in another bathroom. That is a 3000K light, so 3500K would match up fine. But this Broan-Nutone casts such a blue-white light, the colors in the room are distorted to cool tones. But now I have installed it - in my newly refinished/painted, flawless ceiling and I don't know what I can do, but return it and hope I can find a suitable replacement that doesn't require a smaller opening in the ceiling. I reached out to Broan-Nutone and they ignored me. One more complaint for Broan-Nutone - don't advertise that your product is made in the US when a major component (the light) is made in China and is falsely advertised as being 3500K color temperature and it's not. Clearly you just throw it in the box without checking to make sure it meets spec. However, if you have a lighting unit that is actually 3500K, I'd love to have you send me one.

Don't throw out the mounting kit, Study the wire schematic, scratch head, read it again, you can do this! Set the Humidity switch to sensitive because humidity is bad. Use two switch configuration because who really needs three switches to operate a fan? Really? OK.

Per installer, the directions were complex. He ended up YouTubeing how to install! The light is very bright, which I love! Much brighter than I expected. It is not as quiet as I had hoped or was expecting but still better than the old very loud fan we replaced. As mentioned by another reviewer, my bathroom is small, yet I still see steam on the mirror (for reference the fan is installed very close to the shower). I'm not sure if I was expecting too much or if this is normal. Either way, it's a little disappointing. Overall I would have to give it 3 stars because it does look good and provides sufficient lighting.

As several others have mentioned, the instruction manual could use some clarification. I completely missed the first two steps which involved removing the fan from the housing and installing two small brackets inside the housing. I figured out I had to remove the blower when it came time to install the housing on the joist and the illustration looked nothing like what I was seeing, because I had a blower in the way still. Once I had it mounted to the joist I inserted the motor again and carried on. It wasn’t until I was trying to mount the bracket that holds the light assembly on that I realized I had neglected to install the brackets that the brackets mount to, which I later found at the very beginning of the instructions. I think my oversight was because I saw the heading for Retrofit Installation and just proceeded from there. Also the brackets were in a completely separate box from the other parts so I wasn’t thinking they needed to be installed yet. Thankfully they can be installed easily after the housing is wired, ducted and attached to the joist. Phew! I had a moment here where I thought I might have to undo all my work and start over. The overall build quality feels very good though, especially once the light bracket and assembly goes on. It’s solid metal that anchors together nicely. Fan is quiet, and performs well especially compared to our old 2.5 sondes / 50cfm builder grade unit. My biggest complaint is the light quality itself. It doesn’t feel like it’s really 3500k to my eyes. I’m very particular on getting color temp right with LED bulbs, and this one feels more like 4500 or even 5k. It’s a clean bright light but it feels really out of place in my house when everything else (including the vanity) is around 2700-3000k. As soon as I showed my wife the efforts of my afternoon, her deadpan response was “Whoa. That’s a little bright isn’t it?” Thankfully I ran new 14-3 wire from the switch to the ceiling and can now control the light and fan independently. I think I’ll be returning this for one without the light though as we both much prefer it off.