$3599
Pay $10.99 $35.99 when you open a new card. 
Apply for a Home Depot Consumer Card- Surfaced four sides (S4S) hardwood board
- Premium clear red oak wood
- Great for interior home projects.
- View More Details
How to Get It
Frequently Bought Together
Price:
$3599
Product Overview
Red oak S4S boards add elegant finishing details and emphasize the special care that has gone into your home's interior. Perfect for a variety of projects, Builders Choice premium red oak wood is easy to work with and great for machining and finishing. Boards are surfaced four sides (S4S) with flat and parallel faces and edges. Featuring only the finest grade and straight grain texture, it's easy to achieve a natural or rustic look with millwork, furniture, shelving, and much more.
- Actual: 3/4 in. thickness x 5-1/2 in. width x 6 ft. length
- Smooth surface on all 4 sides (S4S) requires minimal sanding
- Recommended for interior use
- Clear red oak wood with light to medium brown coloring and reddish cast
- Stain or clear-coat for a beautiful finish
- Ideal for moulding, furniture, cabinets, DIY projects, hobbies, and more
- Due to the inherent characteristics of wood, color and grain may vary between individual boards
- Sustainably harvested wood
- Click to learn how to select the right lumber for your project
- California residents
Compare Similar Hardwood Boards
 | |  |  | |
| Brand | Builders Choice | Builders Choice | Builders Choice | Builders Choice |
| Name | 1 in. x 6 in. x 6 ft. S4S Hickory Board | 1 in. x 6 in. x 6 ft. S4S Red Oak Board | 1 in. x 6 in. x 6 ft. S4S Cherry Board | 1 in. x 4 in. x 6 ft. S4S Cherry Board (2-Pack) |
| Price | $3299 | $3599 | $4099 | $5444 |
| Ratings | (67) | (189) | (121) | (121) |
| Nominal Product Length (ft.) | 6 ft | 6 ft | 6 ft | 6 ft |
| Coverage Area (sq. ft.) | 3 ft² | 2.75 ft² | 3 ft² | 4 ft² |
| Board Joint Type | Square Edge | Square Edge | Square Edge | Square Edge |
| Finish Type | Unfinished | Unfinished | Unfinished | Unfinished |
| Material | Wood | Wood | Wood | Wood |
| Nominal Product Thickness (in.) | 1 | 1 | 1 | 1 |
| Nominal Product Width (in.) | 6 in | 6 in | 6 in | 4 in |
| Lumber Grade | S4S | S4S | S4S | S4S |
| View Product | View Product | View Product | View Product |
Specifications
Dimensions
| Actual Product Length (ft.) | 6 ft | Actual Product Thickness (in.) | 0.75 in |
|---|---|---|---|
| Actual Product Width (in.) | 5.5 in | Coverage Area (sq. ft.) | 2.75 ft² |
| Nominal Product Length (ft.) | 6 ft | Nominal Product Thickness (in.) | 1 |
| Nominal Product Width (in.) | 6 in |
Details
| Appearance Board Type | Hardwood Boards | Board Joint Type | Square Edge |
|---|---|---|---|
| Fastener recommendation | Nail or screw | Features | Paintable,Stainable |
| Finish Type | Unfinished | Lumber Grade | S4S |
| Material | Wood | Moisture content | Kiln Dried |
| Number Of Boards Per Pack | 1 | Returnable | 90-Day |
| Texture | Smooth |
Warranty / Certifications
| Manufacturer Warranty | None |
|---|
Questions & Answers
Typical questions asked about products:
- Is the product durable?
- Is the product easy to use?
- What are the dimensions of the product?
Customer Reviews
Jan 9, 2021
Beautiful looking boards. Straight, nice grain, no issues. I stained with light oak and a coat ...
Beautiful looking boards. Straight, nice grain, no issues. I stained with light oak and a coat of poly, they are breathtaking and gorgeous.
by
Dec 5, 2020
The wood arrived in good condition. It was well packed. All the wood, except for 1 or 2 inches at...
The wood arrived in good condition. It was well packed. All the wood, except for 1 or 2 inches at the end of 1 board was usable. It was square and nicely finshed - ready for stain! I was very happy with the wood.
by
Nov 25, 2020
The wood was plastic wrapped and cardboard was used. I used the wood to make a kitchen island - ...
The wood was plastic wrapped and cardboard was used.
I used the wood to make a kitchen island - the wood was perfect. It took the stain and polyurethane well and it looks great!
by
Aug 12, 2020
horrible piece of wood sent from manufacturer
Not sure how this piece of wood made it past quality at the mill. huge split right down the middle of the entire piece. will be returning, can't use any of this for my application
by
Aug 27, 2019
Built a shelf for my collection came out nice
Built a shelf for my collection came out nice
by
Jun 7, 2019
All six boards were either straight or had an allowable crown. There was only one board, with a r...
All six boards were either straight or had an allowable crown. There was only one board, with a rough area that had been cut close to a knot that measured about 6" in length on the end of the board. I used these to rebuild a cast iron framed park bench, along with Rust-oleum glossy black paint, Minwax Red Oak stain, Varathane exterior finish. I used a 3/8" quarter round router bit to round the edges. A total cost, not including tools because I already had them, of $160 vs over $400 for a new one.
by
Aug 7, 2018
Boards were uniform in color, slightly bowed. The bow didn't matter for my project but it might ...
Boards were uniform in color, slightly bowed. The bow didn't matter for my project but it might make a difference to you
by
Mar 13, 2018
I used this to rip 1 1/4" strips to use inside the window frame. Very happy with this product.
I used this to rip 1 1/4" strips to use inside the window frame. Very happy with this product.
by
Nov 25, 2017
I've used this 2 times. Most recently I made shelve edges where I ripped this into 1x1 sections a...
I've used this 2 times. Most recently I made shelve edges where I ripped this into 1x1 sections and then sawed a slot into one side to take a glass shelf. This is good stuff. The only real issue I had last time was finding enough dead straight pieces of it as most are warped. I used some dark red stain then some urethane type finish. Turned out awesome. Wife/boss was thrilled.
I'm getting ready to buy more to use a drawer dividers in a new tool box. I'll buy 1/8 MDF, cut it to fit each drawer exactly and glue/screw on a section of this on the back and front of the drawers. Each section will have a 1/4 deep groove every 1". After this goes in each drawer I'll cut 2" sections of MDF or aluminum that will simply slide into these grooves and create long sections for tools.
by
May 6, 2022
Used to be great - now mostly castoffs
We buy bundles regularly - sorry to report - over time the quality has really taken a nosedive. Used to be great quality control - every board usable. I just sorted through the latest shipment of 16 and found 2 usable boards. The rest were either rotten, punky, had several feet of shake, serious wain, and/or multiple loose/missing/open knots.
Natural variations are expected - but S4S hardwood lumber should not be 12% yield
by
Related Products
Explore More on homedepot.com
Flooring
Home Décor
More Products
- Buy Zinsser Perma-White 1 qt. Mold & Mildew-Proof White Semi-Gloss Exterior Paint (6-Pack)
- Buy VELUX 22-1/2 in. x 22-1/2 in. Fresh Air Venting Curb-Mount Skylight with Laminated Low-E3 Glass
- nuLOOM Ethel Medallion Fringe Light Brown 5 ft. x 8 ft. Area Rug
- Hampton Bay Blue/White 9 ft. x 12 ft. Floral Indoor/Outdoor Area Rug
- Ekena Millwork 3 in. Bordeaux Lifetime Vinyl Shutter-Lok's Fastener
Outdoor Living
