#1 Home Improvement Retailer

Internet #300737123

Model #016043779

Store SO SKU #1002212982

Seasoned Wood/Harrison Pine Dark/Augusta Wood 94 in. L x 12-1/8 in. W x 1-11/16 in. T Vinyl Overlay for Stairs 1 in. T

$13210
Apply Now
Pay $107.10 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
caret

Product Details

Cap A Tread is a durable vinyl overlay with pre-attached stair nosing. For updating carpeted or worn out stairs. Easy glue down installation. Cost effective way to add value to your home.
  • Cap A Tread adds character to your stairs, product visuals are designed to closely coordinate with flooring as there may be slight color and texture variation
  • Durable vinyl overlay with pre-attached stair nosing
  • Coordinates with vinyl flooring of any thickness
  • Seasoned Wood/Harrison Pine, Dark Color, Smooth Finish
  • Designed to coordinate with vinyl floors or can be used as a standalone retrofit for an existing stair finish, such as carpet
  • Allows the customer to make a new stairway with a tread covering
  • Can be cut to fit many sizes of existing stair treads
  • Cap A Tread is a MDF based stair tread that sits on top of existing stair treads
  • Simply glue over the existing stair tread
  • For interior use only
  • Residential and commercial use
  • Clean with a damp cloth
  • Matching riser for this tread is sold separately
  • Cap A Tread is wrapped with vinyl flooring
  • Items shppped by parcel ground and may arrive in multiple cartons
  • Proudly manufactured by Zamma Corporation
  • Use only urethane based adhesive to install Cap-A-Tread
  • Return Policy
  • California residents

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
caret

Specifications

caret

Questions & Answers

34Questions
caret
Q:How much is in package
by|Jul 18, 2022
2 Answers
Answer This Question

A:  Thank you for your interest in Zamma Cap-A-Treads. They are packaged 3 per carton.

by|Jan 15, 2023
    2 found this answer helpful

    A:  Not sure why someone replied 3 but if you look at the first paragraph of the description it says 1 cap, and 1 reversible riser. The cost is per stair

    by|Jan 15, 2023
      1 found this answer helpful
      caret
      Q:Are the Bradford nails necessary if only using the Cap A Tread without a riser? It's not clear whether the Brad-nails are for safety to better secure the tread or if the liquid nail is sufficient since there will not be a riser to cover the brad-nails.
      by|May 13, 2022
      1 Answer
      Answer This Question

      A:  Thanks for your question. The brad nails help to hold the cap in place during install, but the primary adhesion occurs with the glue. Please review all of the installation instructions and warranty that are online on Home Depot's website on the item's page, and if you have any further questions, please email customerservice@zamma.com. Good luck with your project!

      by|May 13, 2022
        caret
        Q:Can this product be used for stairs without nosing?
        by|Mar 14, 2022
        2 Answers
        Answer This Question

        A:  Thank you for your interest in Zamma Cap A Treads. You may use the tread without a bull nose, but we recommend filling the gap on the underside with a shim. You may also use our Type 2 tread that has a flatter underside. See the link below. https://www.homedepot.com/p/Cap-A-Tread-Seasoned-Wood-Harrison-Pine-Dark-Augusta-Wood-47-in-L-x-12-1-8-in-W-x-2-3-16-in-T-Vinyl-Overlay-for-Stairs-Type-2-016A73779/300737177

        by|Mar 15, 2022

          A:  I’m sure it could be used in that instance. 

          by|Mar 21, 2022
            caret
            Q:what is the wear layer thickness?
            by|Oct 9, 2021
            1 Answer
            Answer This Question

            A:  The vinyl used on the moldings and treads are 20mil. thick.

            by|Oct 11, 2021
              Showing 1-4 of 34
              caret

              Customer Reviews

              4.3 out of 5
              (76)
              • 4.3
                out of 76 reviews
              • 94%recommend this product
              Filter by:
              Showing 1-10 of 76 reviews
              Great product my stairs look amazing... so easy to install
              Great product my stairs look amazing... so easy to install
              by
              • Verified Purchase
              • Recommended
              1 found this review helpful
              Other than the fact that these pieces are a little expensive they are worth the purchase for the ...
              Other than the fact that these pieces are a little expensive they are worth the purchase for the stairs. I am very happy with the way the finished product turned out and they were very easy to install. You will need a table saw for ripping the length and we used a 12 in sliding compound miter saw for the width cuts. I used Liquid Nails Heavy Duty construction to apply them to the back riser and also for the Cap a Tread steps. Always start at the bottom and do NOT assume each step and riser are the same measurements. Measure twice and cut once! When you are working up the steps if you just measure each of the risers without the step in place your measurements will be off. Do Riser-Step-Riser-Step etc. We will be finishing off our with some custom colored caulk i purchased online and have used in the bathrooms and other areas that needed caulking. Added a pic of that as well from one of the bathrooms.
              by
              • Verified Purchase
              • Recommended
              3 found this review helpful
              Other than the fact that these pieces are a little expensive they are worth the purchase for the ...
              Other than the fact that these pieces are a little expensive they are worth the purchase for the stairs. I am very happy with the way the finished product turned out and they were very easy to install. You will need a table saw for ripping the length and we used a 12 in sliding compound miter saw for the width cuts. I used Liquid Nails Heavy Duty construction to apply them to the back riser and also for the Cap a Tread steps. Always start at the bottom and do NOT assume each step and riser are the same measurements. Measure twice and cut once! When you are working up the steps if you just measure each of the risers without the step in place your measurements will be off. Do Riser-Step-Riser-Step etc. We will be finishing off our with some custom colored caulk i purchased online and have used in the bathrooms and other areas that needed caulking. Added a pic of that as well from one of the bathrooms.
              by
              • Verified Purchase
              • Recommended
              We used the tread and the riser and it all...
              We used the tread and the riser and it all turned out beautifully.
              by
              • Verified Purchase
              1 found this review helpful
              They look great!
              These were very easy to install, cut very well. One came in slightly damaged on a corner, but since we were cutting down to size it didn't impact us. Held down with carpenters adhesive. We did install non-slip treads on them as the dogs found them very slippery. We bought clear, self-stick treads, most of the time I don't even see them
              by
                • Recommended
                2 found this review helpful
                Good product. Yes it is expensive but if you take...
                Good product. Yes it is expensive but if you take into consideration the time and labor it would take to stain and finish hard wood this is worth the $. I installed this over old stair treads. Its easy to install if you get the cuts just right. ( You don't want to measure wrong and ruin a $50 tread.) It matches great with LifeProof Seasoned Wood Flooring. I'll be installing this on another stair case in my house.
                by
                • Verified Purchase
                2 found this review helpful
                Good Quality and looks great!
                Good Quality and looks great!
                by
                • Verified Purchase
                • Recommended
                Easy to cut and install. No problems with splintering or chipping when cutting to fit. Looks gr...
                Easy to cut and install. No problems with splintering or chipping when cutting to fit. Looks great. Would highly recommend as an upgrade for stairs.
                by
                • Verified Purchase
                • Recommended
                2 found this review helpful
                We purchased this product to finish the hallway leading to the stairs. The product matched the fl...
                We purchased this product to finish the hallway leading to the stairs. The product matched the flooring perfectly but the thickness was greater than flooring. We shimmed the flooring edge to create a smooth transition. Hence, the 4 star rating.
                by
                • Verified Purchase
                • Recommended
                2 found this review helpful
                Easy install and looks beautiful kind of expensive but both the treads and risers are basically p...
                Easy install and looks beautiful kind of expensive but both the treads and risers are basically particle board with a thin veneer so any kind of moisture would quickly ruin them but for what I was doing they were perfect
                by
                • Verified Purchase
                • Recommended
                Showing 1-10 of 76 reviews

                Frequently Bought Together

                Top Rated
                +
                +
                Price:
                $13210

                Compare Similar Vinyl Stair Treads

                current product
                Top RatedSeasoned Wood/Harrison Pine Dark/Augusta Wood 94 in. L x 12-1/8 in. W x 1-11/16 in. T Vinyl Overlay for Stairs 1 in. T
                Trail Oak/Georgia Clay 94 in. L x 12-1/8 in. W x 1-11/16 in. T Vinyl Overlay to Cover Stairs 1 in. ThickBurnt Oak/Auburn Wood 94 in. L x 12-1/8 in. W x 1-11/16 in. T Vinyl Overlay to Cover Stairs 1 in. ThickWalton Oak 94 in. L x 12-1/8 in. W x 1-11/16 in. T Vinyl Overlay to Cover Stairs 1 in. Thick
                BrandCap A TreadCap A TreadCap A TreadCap A Tread
                NameSeasoned Wood/Harrison Pine Dark/Augusta Wood 94 in. L x 12-1/8 in. W x 1-11/16 in. T Vinyl Overlay for Stairs 1 in. TTrail Oak/Georgia Clay 94 in. L x 12-1/8 in. W x 1-11/16 in. T Vinyl Overlay to Cover Stairs 1 in. ThickBurnt Oak/Auburn Wood 94 in. L x 12-1/8 in. W x 1-11/16 in. T Vinyl Overlay to Cover Stairs 1 in. ThickWalton Oak 94 in. L x 12-1/8 in. W x 1-11/16 in. T Vinyl Overlay to Cover Stairs 1 in. Thick
                Price
                $13210
                $13210
                $13210
                $13210
                Ratings
                (76)
                (56)
                (16)
                (58)
                Stair Tread TypeCoverCoverCoverCover
                Product Length (in.)94 in94 in94 in94 in
                FeaturesMark Resistant,Scratch Resistant,Skid ResistantMark ResistantMark ResistantMark Resistant,Scratch Resistant,Skid Resistant
                Flooring LookWood LookWood LookWood LookWood Look
                Indoor/OutdoorIndoor OnlyIndoor OnlyIndoor OnlyIndoor Only
                StyleStyleStyleStyleStyle
                THD SO SKU1002212982100004457410000446351002280905
                View ProductView ProductView ProductView Product