FREE IN-STORE PICKUP Over one million online items eligible

Internet #

204853843

Model #

2908

Store SKU #

1000337613

1/4 in. x 2 ft. x 2 ft. PureBond Poplar Plywood Project Panel (Free Custom Cut Available)

$899
Limit 90 per order
  • Free custom cut available - See details below
  • PureBond uses formaldehyde-free, soy-based assembly technology
  • Cost-competitive decorative hardwood plywood
  • View More Details
Store
0 in stock
caret

Product Details

Custom Cut Your Order for Free Here
Homedepot Image

Professional-grade

VENEER-CORE HARDWOOD
PLYWOOD

________________________________

PureBond is available in a wide range of real-wood face veneers, for great design versatility in DIY and professionally-built projects.

Homedepot Image

Formaldehyde-Free

PureBond promotes healthy indoor air quality through its proprietary soy-based resin technology.

Homedepot Image

Perfect for DIY Projects

Build cabinets, furniture, wall paneling, shelving, storage solutions, media centers, headboards and more.  


Homedepot Image

Cost-Effective

Standard sheets are 4’ x 8’. Or choose smaller PureBond Project Panels at homedepot.com to minimize waste.

For DIYers and professional tradesmen who recognize the importance of going green and using natural timber harvested in a responsible manner, turn to this PureBond Poplar Plywood from Columbia Forest Products. Each 3-ply sheet features decorative poplar veneers on the face and back, which exhibit the warmth and beauty of natural hardwood to supply your carpentry creations with visual allure. Furthermore, the 1/4 in. x 2 ft. x 2 ft. panels are manufactured with a soy-based PureBond technology that is formaldehyde-free so it wont deteriorate air quality, as is common with UF-constructed sheets that are susceptible to releasing airborne contaminants over time. Intended for interior use, these poplar plywood panels are an affordable way to craft authentic hardwood-faced masterpieces such as built-in cabinets, entertainment centers, tables, shelves, headboards, wall panels and more. With an eye toward sustainability, Columbia Forest Products takes pride in manufacturing this Earth-conscious product and takes seriously its responsibility in replenishing forests for future generations.
  • CLICK HERE TO HAVE YOUR PLYWOOD CUSTOM CUT. Please complete your purchase after the form has been submitted. Note: The form is not available on mobile devices.
  • 3-ply project panel is assembled with decorative poplar veneer applied to only the face side of this panel, the back of the panel is not intended to be exposed
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • The decorative top veneer, measuring approximately 1/38" thick, exhibits the beauty and timeless quality of natural hardwood and is suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 1/4 in. x 2 ft. x 2 ft.; Actual: 0.203 in. x 24 in. x 24 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 3 lbs.
  • Grade: B-4 - See Grading Guide for additional information
  • Available in additional species- Alder, Cherry, Cedar, Hickory, Maple, Mahogany, Red Oak, Walnut, and White Oak
  • Return Policy
  • California residents

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

24Questions
caret
Q:Hello, If I have this panel cut to 1' x 2' would I get both pieces of wood or only one?
by|Feb 28, 2023
3 Answers
Answer This Question

A:  I can only guess you would get both.

by|Mar 1, 2023

    A:  2 pieces --- i got mine cut into 1x1 (as close as possible) & got all 4 pieces

    by|Mar 2, 2023

      A:  Yes you get both pieces

      by|Mar 1, 2023
        caret
        Q:I have to order piece of Plywood
        by|Aug 2, 2022
        1 Answer
        Answer This Question

        A:  Hello, Based on the 36" dimension, you would need to order the 1/4 in. x 2 ft. x 4 ft. poplar panel.

        by|Aug 3, 2022
          caret
          Q:Will the store custom cut a "half moon" shape for me? 36"L x 18"wide
          by|Jun 14, 2022
          0 Answer
          Answer This Question
          caret
          Q:can you cut it easily with a jigsaw?
          by|Dec 17, 2021
          1 Answer
          Answer This Question

          A:  This should cut easily with a jigsaw if a sharp, well-conditioned blade is used.

          by|Dec 17, 2021
            Showing 1-4 of 24
            caret

            Customer Reviews

            4.8 out of 5
            (97)
            • 4.8
              out of 97 reviews
            • 93% recommend this product
            Filter by:
            Showing 1-10 of 97 reviews
            Not Aesthetic
            I'm not sure how to best say it, but simply this was an ugly batch of wood. My first order looked great, so I didn't think twice to make another one. Unfortunately neither side looks usable. Every piece has large sections that are yellow to green hued.
            by
              Very smooth, nice pieces of wood. The free cutting service is the best. Quick delivery. Have alre...
              Very smooth, nice pieces of wood. The free cutting service is the best. Quick delivery. Have already purchased again and will do so again and again.
              by
              • Verified Purchase
              • Recommended
              I needed something to cover the framed out access hole to the motor for my whirlpool bath tub. Th...
              I needed something to cover the framed out access hole to the motor for my whirlpool bath tub. This worked perfectly and was cost effective. It is thin and light; I think I will be able to just use Velcro to keep it in instead of having to use hardware. The free custom cutting was so convenient. It fit just right. I will paint it all so you don't notice it. Thank you!
              by
              • Verified Purchase
              • Recommended
              I chose the poplar plywood panel to complete a repair on a DIY fail on a kitchen cabinet that I h...
              I chose the poplar plywood panel to complete a repair on a DIY fail on a kitchen cabinet that I had cut a large opening into so I could wire up a range hood attached to it. When that didn't work out, I had to hide the hole and an HD search revealed I could order the poplar plywood panel for convenient home delivery. The plywood arrived in good shape except for a small edge section that got damaged during shipment which was easily cut off with only 1/2 inch loss of material. The panel cut cleanly using a table saw, and the front and back of the plywood are smooth and accepted stain well. I completed the repair and am very satisfied with the result and recommend this panel for your next DIY build project.
              by
              • Recommended
              1 found this review helpful
              The 1/4 IN. X 2 FT. X 4 FT. plywood arrived in great shape, great packaging, the board was betwee...
              The 1/4 IN. X 2 FT. X 4 FT. plywood arrived in great shape, great packaging, the board was between 2 pieces of cardboard. I'll be using the cardboard to spray paint my Kitchen and Baths cabinet pulls. There is no dings, dent, chips or edge voids. This is a even 1/4" all the way around the board. You can use this for almost any project I will be using this to make a nice bird house, searching for Free Bird House Plans online. Don't know if I will paint it out or just stain it, either way it should look great. You won't be disappointed with this plywood.
              by
              • Recommended
              2 found this review helpful
              The face side of this ¼” poplar plywood is perfect for my project. The sheet is exactly 2’ wide a...
              The face side of this ¼” poplar plywood is perfect for my project. The sheet is exactly 2’ wide and is a tad over 4’ high. The edges are straight and not jagged. The face has wonderful poplar graining and should stain nicely. The face is smooth and feels ready for finishing. The backside of this piece of plywood, although not intended for exposure, would work well as the back of a cabinet. My project involves using this 2 X 4 sheet of poplar plywood to face the top of a rather deep doorway in our basement. I’ll corner bead the exposed edge. The panel is made in the USA and can be cut to order. It doesn’t get much better than that.
              by
              • Recommended
              3 found this review helpful
              Good plywood for many uses.
              This 1/4 in. x 2 ft. x 4 ft. PureBond Poplar Plywood Project Panel by Columbia Forest Products is really good plywood that can be used on many different projects in my woodworking. I want to say right off that this plywood is NOT 1/4" thick. It is 15/64". So if you plan on using this plywood in any type of dado you will need a 15/64" router bit. That being said I do like working with this brand of plywood. It is a 3-ply with 1/28" veneer on both sides. The veneer used looks exactly like Poplar, in this case. And the same can be said for all the other hardwood panels in this series, they are true to the species. One side does look better than the other but just barely. This plywood can easily be stained, painted or sealed. I have used it in several different projects. It can be to make cabinets, entertainment centers, tables, shelves, headboards, wall panels and just about anything you care to create. When cutting on a tble saw be sure to use at least an 80 tooth blade to help prevent chipping.
              by
              • Recommended
              5 found this review helpful
              Nice finished plywood
              Shipped uva ups in a large card board box, large enough to ensure their will be no damage to the product. The panel is finished on both sides and smooth to the touch. Its not warped and looks nice. I do not see any splits on the wood surface or any seams like some plywood that seems to be glued together. This has more of a quality of a solid sheet then bonded layers, since even on the cut ends I do not see any layers.
              by
              • Recommended
              5 found this review helpful
              great plywood
              The COLUMBIA FOREST PRODUCTS 1/4 in.x 2 ft. x 4 ft. purebond poplar plywood project panel was delivered packaged like a pro. When I unboxed it I found a nice grained poplar 2x4 ft. flat panel. It was sanded well on one side and that is the exposed side. I am going to use it for a small table top I am building. This panel must be cut with a fine tooth blade. These panels finish very well.
              by
              • Recommended
              1 found this review helpful
              Panel was cut to my specs. Everything was perfect...
              Panel was cut to my specs. Everything was perfect
              by
              • Verified Purchase
              Showing 1-10 of 97 reviews

              Frequently Bought Together

              +
              +
              Price:
              $899

              Compare Similar Project Panels

              1/4 in. x 2 ft. x 2 ft. PureBond Red Oak Plywood Project Panel (Free Custom Cut Available)
              current product
              1/4 in. x 2 ft. x 2 ft. PureBond Poplar Plywood Project Panel (Free Custom Cut Available)
              1/4 in. x 2 ft. x 2 ft. PureBond Alder Plywood Project Panel (Free Custom Cut Available)1/4 in. x 2 ft. x 2 ft. PureBond Hickory Plywood Project Panel (Free Custom Cut Available)
              BrandColumbia Forest ProductsColumbia Forest ProductsColumbia Forest ProductsColumbia Forest Products
              Name1/4 in. x 2 ft. x 2 ft. PureBond Red Oak Plywood Project Panel (Free Custom Cut Available)1/4 in. x 2 ft. x 2 ft. PureBond Poplar Plywood Project Panel (Free Custom Cut Available)1/4 in. x 2 ft. x 2 ft. PureBond Alder Plywood Project Panel (Free Custom Cut Available)1/4 in. x 2 ft. x 2 ft. PureBond Hickory Plywood Project Panel (Free Custom Cut Available)
              Price
              $799
              $899
              $1146
              $1299
              Ratings
              (240)
              (97)
              (33)
              (50)
              Nominal Product Thickness (in.)1/41/41/41/4
              Nominal Product Width (ft.)2222
              Nominal Product Length (ft.)2222
              Project Panel TypeHardwood PlywoodHardwood PlywoodHardwood PlywoodHardwood Plywood
              Exposure DurabilityInteriorInteriorInteriorInterior
              Plywood FeaturesPaintable,Sanded,StainablePaintable,Sanded,StainablePaintable,Sanded,StainablePaintable,Sanded,Stainable
              View ProductView ProductView ProductView Product