#1 Home Improvement Retailer

Internet # 204311233

Model # 2052

1/4 in. x 2 ft. x 4 ft. PureBond White Oak Plywood Project Panel (Free Custom Cut Available)

$25.99
Limit 90 per order
Apply Now
Pay $0.99 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Free custom cut available - See details below
  • White Oak plywood strength, performance and durability
  • White Oak veneer on face side of plywood
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
caret
Product Details
  • Free custom cut available - See details below
  • White Oak plywood strength, performance and durability
  • White Oak veneer on face side of plywood
About This Product

An environmentally friendly soy-based technology is used to secure the 3 plies on this lovely PureBond White Oak Plywood Project Panel, providing a craftsmen workpiece that is as durable as it is beautiful. The formaldehyde-free adhesion compound has a higher moisture tolerance than UF-laden panels and the multilayered construction makes it less likely to warp than solid wood. Furthermore, it won't release airborne contaminants into your interior space over time, as urea formaldehyde (UF) sheets commonly do, making it a cost-competitive alternative that won't subject you to harmful fumes. Each 1/4 in. x 2 ft. x 4 ft. panel features white oak veneers that are plain-sliced from domestically harvested timber in a sustainable manner, giving you peace of mind that you are purchasing an Earth-conscious forest product.

  • CLICK HERE TO HAVE YOUR PLYWOOD CUSTOM CUT. Please complete your purchase after the form has been submitted. Note: The form is not available on mobile devices.
  • 3-ply project panel is assembled with a smooth, patch-free white oak face veneer applied to only the face side of this panel; the back of the panel is not intended to be exposed
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • The decorative top veneer, measuring approximately 1/50" thick, exhibits the beauty and timeless quality of natural hardwood and is suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 1/4 in. x 2 ft. x 4 ft.; Actual: 0.203 in. x 24 in. x 48 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 6 lbs.
  • Grade: B-4 - See Grading Guide for additional information
  • Available in additional species- Alder, Cherry, Cedar, Hickory, Maple, Mahogany, Poplar, Red Oak, and Walnut
  • Return Policy
  • California residents
     see Prop 65 WARNINGS
Product ID #: 204311233Internet #: 730232002052Model #: 2052
caret

Specifications

Dimensions

Actual Product Length (in.)48.000 inActual Product Thickness (in.)0.203 in
Actual Product Width (in.)24 inNominal Product Length (ft.)4
Nominal Product Thickness (in.)1/4Nominal Product Width (ft.)2

Details

Exposure DurabilityInteriorPack Size1
Plywood FeaturesPaintable, Sanded, StainablePlywood Product TypeProject Panels
Project Panel TypeHardwood PlywoodReturnable90-Day

Warranty / Certifications

Manufacturer WarrantyProduct warranted against glue or bond failure. Product replacement provided.
caret

Questions & Answers

44Questions
caret
Q:Hello do I need to stain the wood or is ready to use I?m using for a dining table and I want avoid stain Thank you
by|Aug 16, 2023
1 Answer
Answer This Question

A:  Hello, Yes, the PureBond White Oak can be stained. You do not have to. That is more of a personal opinion if you decide to, but I would recommend a light sanding if you do decide to stain.

by|Aug 16, 2023
    caret
    Q:Can this be cut into 2? x 8foot strips?
    by|Apr 28, 2023
    1 Answer
    Answer This Question

    A:  Hi, You can enter your custom cut form for the strips you are wanting. We will get as many strips from board as we can if that is what you want. You just need to specify in the instructions when entering your custom cut form. Thanks.

    by|May 2, 2023
      caret
      Q:Could I use this as an overlay on top of my existing kitchen counters if I seal it?
      by|Feb 19, 2023
      1 Answer
      Answer This Question

      A:  Hi, I would not recommend this product as an overlay for your kitchen counter. Our white oak is 1/50'' thick and with it being wood, I just would not recommend it.

      by|Feb 21, 2023
        caret
        Q:Can I refuse any part of order for quality ?
        by|Feb 1, 2023
        1 Answer
        Answer This Question

        A:  Hello, You have the option to return the product if it does not meet your needs.

        by|Feb 2, 2023
          Showing 1-4 of 44
          caret

          Customer Reviews

          4.6 out of 5
          • 4.6 out of 112 reviews
          • 87% recommend this product
          Filter by:
          Showing 1-10 of 112 reviews
          Came with a weird v pattern
          The V pattern carried across the width of the 2 foot section. The rest of the board was beautiful but I needed the whole board. I've purchased 4 of the red oak and both sides were usable. Not so for the white oak. The opposite side looked bad compared to the red oak panels. (See photo's) The local store doesn't carry them so I can't pick my own, or replace them to return so since the first 30" is good for a cabinet end panel I'll keep it. Shame since I was going to purchase two more.
          by
            • Recommended
            1/4in white oak ply
            Ordered 2 1/4 2x4 sheets of this white oak plywood. It came out of the box warped and I had to spray water and leave in the sunlight with weights on it to fix the warping. The grain and color were pretty good on one sheet but not so much the other. I’d buy again but order multiple pieces next time to sort through and return the pieces which arent to your standards
            by
              • Recommended
              1 found this review helpful
              Excellent quality material and easy to work with....
              Excellent quality material and easy to work with.
              by
              • Verified Purchase
              1 found this review helpful
              Worked great for backing of our white oak slat wall in living room. Arrived with no damage and ha...
              Worked great for backing of our white oak slat wall in living room. Arrived with no damage and has a beautiful grain. Will purchase again!
              by
              • Verified Purchase
              • Recommended
              1 found this review helpful
              Used as veneer on the top 9 risers for our stairs I refinished with new oak treads to replace old...
              Used as veneer on the top 9 risers for our stairs I refinished with new oak treads to replace old carpet. Took the Varathane Golden Oak stain great and 3 coats of polyurethane to give the stairs a solid and natural look!
              by
                • Recommended
                1 found this review helpful
                Nice smooth oak. Grain was very well patterned, and no...
                Nice smooth oak. Grain was very well patterned, and no knots on the finished side. Stained very well.
                by
                • Verified Purchase
                1 found this review helpful
                I ordered 12 of these. About 5 were exceptionally nice in grain/appearance, about 4 were very go...
                I ordered 12 of these. About 5 were exceptionally nice in grain/appearance, about 4 were very good and 3 were average but even those were as good as the photos on the website. One was pretty warped, the rest were very flat. Everything came packaged very well and there was no significant damage to edges and no problems at all with the faces. So overall I'm very happy with these and would buy again for this price. Wish it qualified for the free shipping especially when you buy a lot, or at least had the option of shipping to store.
                by
                  • Recommended
                  3 found this review helpful
                  Beautiful
                  The panel I received was perfectly straight with no warps, bends, or cracks. For appearance, one side is completely free of any defects. The other side has the less than ideal appearance, but that depends on what kind of look you are going for. Either way, the wood is top of the line. Even the not perfect side is still just about perfectly smooth. If you are concerned about the environment then you will be happy to hear that this uses soy based technology that is guaranteed not to lose adhesion.
                  by
                  • Recommended
                  4 found this review helpful
                  by
                  • Verified Purchase
                  The board was cut correctly to my specifications.
                  by
                  • Verified Purchase
                  Showing 1-10 of 112 reviews