#1 Home Improvement Retailer

Internet # 203553007

Model # 1826

3/4 in. x 2 ft. x 4 ft. PureBond Maple Plywood Project Panel (Free Custom Cut Available)

$31.99
Limit 90 per order
Apply Now
Pay $6.99 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Free custom cut available - See details below
  • Maple plywood strength, performance and durability
  • Maple veneer on both sides of plywood
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
caret
Product Details
  • Free custom cut available - See details below
  • Maple plywood strength, performance and durability
  • Maple veneer on both sides of plywood
About This Product

Use this 3/4 in. x 2 ft. x 4 ft. PureBond Maple Plywood Project Panel for your next cabinetry or furniture project and never worry about it releasing airborne contaminants, as formaldehyde-laden products are prone to do. Decorative maple veneers grace the top and bottom of this 7-ply panel, with other hardwood layers sandwiched between and glued with a soy-based PureBond technology that is environmentally friendly and won't off-gas toxic fumes like UF plywood. The natural warmth and beauty of real maple gives the top and bottom veneers a splendid appearance that forms the foundation for impressive DIY creations, such as serving trays, end tables, pet food centers, footstools, wall pockets, shelves and more. It's a cost-competitive alternative to products that may degrade indoor air quality over time and its water resistance further strengthens its endurance for lasting performance.

  • CLICK HERE TO HAVE YOUR PLYWOOD CUSTOM CUT. Please complete your purchase after the form has been submitted Note: The form is not available on mobile devices.
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • Decorative top and bottom veneers, measuring approximately 1/42 in. thick, exhibit the beauty and timeless quality of natural hardwood and are suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 3/4 in. x 2 ft. x 4 ft.; actual: 0.703 in. x 24 in. x 48 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 18 lbs.
  • Grade: B-2 - see grading guide for additional information
  • Available in additional species- Alder, Cherry, Cedar, Hickory, Mahogany, Poplar, Red Oak, Walnut, and White Oak
  • Return Policy
  • California residents
     see Prop 65 WARNINGS
Product ID #: 203553007Internet #: 730232001826Model #: 1826
caret

Specifications

Dimensions

Actual Product Length (in.)48.000 inActual Product Thickness (in.)0.703 in
Actual Product Width (in.)24 inNominal Product Length (ft.)4
Nominal Product Thickness (in.)3/4Nominal Product Width (ft.)2

Details

Exposure DurabilityInteriorPack Size1
Plywood FeaturesPaintable, Sanded, StainablePlywood Product TypeProject Panels
Project Panel TypeHardwood PlywoodReturnable90-Day

Warranty / Certifications

Manufacturer WarrantyProduct warranted against glue or bond failure. Product replacement provided.
caret

Questions & Answers

49Questions
caret
Q:Can I put contact paper on this material
by|Sep 30, 2023
1 Answer
Answer This Question

A:  Hi, That should work fine, I don't believe there will be any issues with that.

by|Oct 1, 2023
    caret
    Q:How do I put the custom cuts in?
    by|Aug 28, 2023
    1 Answer
    Answer This Question

    A:  Hi, All you will need to do is select "Product Details" and the form should pop up! Then all you need to do is fill it out and submit and we will take care of the rest. Make sure your order and forms are using the same names.

    by|Aug 29, 2023
      caret
      Q:I was planning to use this as a desktop for a standing desk, would this be able to handle a monitor arm around the edge with 3 monitors? The total weight of the arm and monitors would be around 50 lbs
      by|Aug 14, 2023
      1 Answer
      Answer This Question

      A:  Hi, Yes, I would recommend a 3/4" Sheet, but this should work fine. Thanks.

      by|Aug 15, 2023
        caret
        Q:Is this suitable as a base for my compound miter saw? I have a new Craftsman saw and the holes don't lineup on my existing stand. If not, what would you recommend?
        by|Apr 18, 2023
        1 Answer
        Answer This Question

        A:  Hi, I believe the 3/4'' will be fine for that application. Thanks.

        by|Apr 20, 2023
          Showing 1-4 of 49
          caret

          Customer Reviews

          4.7 out of 5
          • 4.7 out of 189 reviews
          • 95% recommend this product
          Filter by:
          Showing 1-10 of 189 reviews
          Top notch plywood
          Pricey but very good quality , flat ,even grain, and easy to finish.
          by
          • Verified Purchase
          • Recommended
          Writing
          It would be great if permanent marker letters werent written on it. Not sure if this was a custom cut issue or they come marked on already. So aggravating considering how much I paid for it.
          by
            • Recommended
            1 found this review helpful
            Perfect for tabletop
            I made a small writing desk. The veneer is very nice; I opted not to stain it and instead used three coats of poly. I also received a custom cut as ordered. With the excess, I plan to make a monitor stand. Great experience
            by
              • Recommended
              Good quality finish
              This panel is of good quality and easy to work with. I used the option to have the panels custom cut to my dimensions for no extra cost, shipped to my house, and the cuts were very clean and accurate. I built a floating nightstand for my bedroom. I finished by staining and polyurethane.
              by
              Response from CFP Customer ServiceDec 27, 2021
              I'm so glad this product worked for you! Thank you for sharing
              • Verified Purchase
              • Recommended
              1 found this review helpful
              I used this to make a custom coffin longboard for my husband (Maple is a really soft, sturdy wood...
              I used this to make a custom coffin longboard for my husband (Maple is a really soft, sturdy wood for boards) and it made a REALLY fun and awesome personalized gift with my Skil-saw and ebony stain I bought from Home Depot. My husband was completely blown away at the quality of the wood/board and that I could have easily spend $200 purchasing something like this but was able to do it all on my own from Home Depot (aside from the grip and wheels ofcourse). I love this wood and the characteristics are beautiful
              by
              • Verified Purchase
              • Recommended
              Arrived in a box in perfect condition. Worked out...
              Arrived in a box in perfect condition. Worked out great for a shop project.
              by
              • Verified Purchase
              New Kitchen
              This plywood is awesome. I used this to build new cabinets for my kitchen. The finish is beautiful. I am very pleased with the outcome. I will definitly use this again when I remodel the bathroom.
              by
                • Recommended
                Nice enough for Furniture
                I was really surprised at the nice smooth finish on this piece of plywood. One side is smoother than the other. It is nice enough to use for furniture. Since this was mailed, one of the corners was a little banged up. You can see the crunched corner of the box in the photo. Both sides of the plywood were clean and had no knots. The smoother side has one panel that is a little darker than the others. The Maple bond is about 1/32" thick. Since this is 3/4" thick, it is a nice heavy piece of plywood. I'd recommend this, but you'd need to check each piece of wood for flaws.
                by
                • Recommended
                5 found this review helpful
                Love this!
                I purchased a full sheet to use on some end tables that I was building. This wood is beautiful and I love that it is safe for my family. I used it for the bottom shelves and the tops of my tables. I ended up staining the tops with an Oak stain followed by just a little bit of Kona that I wiped off immediately. I ended up looking great! I would definitely recommend Purebond.
                by
                • DIY
                • Recommended
                7 found this review helpful
                Easy to work with.
                I ordered this online and it was delivered within a few days. The tight grain of this Maple is ideal for making cutting boards for kitchen use. I was able to make six cutting boards from the 2' x 4' piece I ordered. They were edged in 1/4'' Oak. Great Product.
                by
                • DIY
                • Verified Purchase
                • Recommended
                13 found this review helpful
                Showing 1-10 of 189 reviews

                Compare Similar Items