#1 Home Improvement Retailer

Internet #203552991

Model #1765

3/4 in. x 2 ft. x 4 ft. PureBond Walnut Plywood Project Panel (Free Custom Cut Available)

$4099
Limit 90 per order
Apply Now
Pay $15.99 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Free custom cut available - See details below
  • Soy-based PureBond adhesive is formaldehyde-free
  • Hardwood plywood strength, performance and durability
caret

Product Details

Custom Cut Your Order for Free Here
Homedepot Image

Professional-grade

VENEER-CORE HARDWOOD
PLYWOOD

________________________________

PureBond is available in a wide range of real-wood face veneers, for great design versatility in DIY and professionally-built projects.

Homedepot Image

Formaldehyde-Free

PureBond promotes healthy indoor air quality through its proprietary soy-based resin technology.

Homedepot Image

Perfect for DIY Projects

Build cabinets, furniture, wall paneling, shelving, storage solutions, media centers, headboards and more.  


Homedepot Image

Cost-Effective

Standard sheets are 4’ x 8’. Or choose smaller PureBond Project Panels at homedepot.com to minimize waste.

This PureBond Walnut Plywood Project Panel features plain-sliced veneers cut from natural timber harvested in a sustainable manner from American hardwood forests, ensuring premium quality, lasting durability and enduring beauty with each sheet. Fortified with a yellow poplar core substrate, the layers of this 7-ply panel are glued together with a cutting-edge PureBond technology derived from soybeans-an environmentally friendly, formaldehyde-free solution that is water-resistant and will not emit airborne contaminants. Precision-cut in 3/4 in. x 2 ft. x 4 ft. panels with burr-free edges, this decorative walnut plywood is perfect for smaller woodworking projects and serves as a cost-competitive alternative to UF-laden plywood, which is prone to degrade indoor air quality over time by off-gassing toxic fumes. The strength and flatness of these panels gives DIYers and professional carpenters the confidence to construct a variety of cabinet-grade gems for a lifetime of dependability and enjoyment.
  • CLICK HERE TO HAVE YOUR PLYWOOD CUSTOM CUT. Please complete your purchase after the form has been submitted Note: The form is not available on mobile devices.
  • 7-ply project panel is assembled with smooth, patch-free walnut veneers
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • Decorative top and bottom veneers, measuring approximately 1/50" thick, exhibit the beauty and timeless quality of natural hardwood and are suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 3/4 in. x 2 ft. x 4 ft.; actual: 0.703 in. x 24 in. x 48 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 18 lbs.
  • Grade: B-2 - see grading guide for additional information
  • Available in additional species- Alder, Cherry, Cedar, Hickory, Maple, Mahogany, Poplar, Red Oak, and White Oak
  • Return Policy
  • California residents

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
caret

Specifications

caret

Questions & Answers

49Questions
caret
Q:I was thinking about using this as a crafting desk top. I wanted to no if I can use Osmo Polyx-oil high solid on this board without the veneer separating?
by|Nov 10, 2022
1 Answer
Answer This Question

A:  Hello, The finish will not impact the bond of the veneer to the panel.

by|Nov 11, 2022
    caret
    Q:Does this plywood have walnut veneer on both sides
    by|Aug 5, 2022
    2 Answers
    Answer This Question

    A:  Hello, yes it will have walnut veneer on both sides of the panel.

    by|Aug 7, 2022

      A:  Yes. Description states, "Decorative top and bottom veneers..."

      by|Aug 6, 2022
        caret
        Q:Noticed there is no more 4x8 of walnut plywood. Is it because of shortage of wood supply or the price is prohibitive?
        by|Jun 12, 2022
        3 Answers
        Answer This Question

        A:  I believe your assumption is correct. The likelihood of there being a shortage is highly probable. I ordered two 3/4" 2x4 sheets last year, and they were cut to my specifications. I created a pair of horn lens cabinets for a pair of vintage EV 1824M, 1" midrange horn drivers, coupled to vintage SONIC 10" x 22" exponential horns. The end results were excellent. Since then, the wood has darkened a few shades on it's own, and the grain, look, and feel, are fantabulous.

        by|Jun 14, 2022

          A:  Haven't a clue. Probably a question for Home Depot and not the community of customers.

          by|Jun 16, 2022

            A:  Hello, The 4x8 is not an option online due to the size of the panel. The size does not work for parcel shipping.

            by|Jun 13, 2022
              caret
              Q:Can you stain the veneer?
              by|Apr 17, 2022
              1 Answer
              Answer This Question

              A:  Hello Pete, Yes the PureBond Walnut can be stained. Would recommend a light sanding on the panel before staining.

              by|Apr 18, 2022
                Showing 1-4 of 49
                caret

                Customer Reviews

                4.4 out of 5
                (218)
                • 4.4
                  out of 218 reviews
                • 87%recommend this product
                Filter by:
                Showing 1-10 of 218 reviews
                Generally good plywood, some really nice looking pieces every once in a while. I have been using ...
                Generally good plywood, some really nice looking pieces every once in a while. I have been using it to build some furniture where I add thin strips of solid walnut as edge banding. The most recent couple of sheets I got have some large voids, but this is the first time I've seen that. The face veneer is always nice, you do get some bookmatched or repeating grain. Occasionally there will be some figuring in the veneer.
                by
                • Verified Purchase
                • Recommended
                1 found this review helpful
                Not Perfect but Very Good
                I needed two panels to make a 24 inch vanity as a Christmas present to my wife. The sides, drawer fronts and bottom shelf are made from this plywood. Both side would have been usable with different grain patterns but there was a slight raised imperfection in one side of one panel. There was very minimal sapwood (light color streaking) in the plywood so it took stain quite well. I was tempted to use the free cutting service but decided I might adjust a dimension and waited to do both rips and crosscuts myself. I used a 5-1/2" 100-tooth blade on a battery operated circular saw for crosscuts with a track guide that I made from 1/4 plywood strips. Rips were made on my table saw that has a small tabletop since it is a job site saw. Both types of cuts were successful with virtually no splintering. The wood veneer took stain uniformly without a conditioner. I chose a golden oak stain knowing that even a fairly light stain would turn walnut pretty dark.
                by
                  • Recommended
                  1 found this review helpful
                  Walnut venner 3/4 ply
                  Plywood was nice would be better of you could get the walnut venner in full sheets 4x8 and the price is ridiculous needs to be lowered
                  by
                  • Verified Purchase
                  • Recommended
                  These are high quality Walnut boards
                  The boards were straight and easy to work. I love the poplar core which is very good for acoustic purposes since I make drums. Beautiful grain and the veneer is thick enough to be easily sanded with 220 grit sand paper without eating through.
                  by
                    • Recommended
                    2 found this review helpful
                    Good quality product, it would be nice if they made a veneered product on something like pine as ...
                    Good quality product, it would be nice if they made a veneered product on something like pine as well as plywood. Used this to top a desk and I was quite impressed at how well it turned out and how nice it looked when finished. A good quality product at a great price. I would suggest they pack it a little better though, first one I got was damaged badly because it wasn't packed well enough to keep it from damage during shipment. Second one was chipped on corner but since I was going to round it off it didn't matter. Needs better packing, the product itself is quite nicely made.
                    by
                    • Verified Purchase
                    • Recommended
                    Great product. Would have been happier if it came with the Walnut veneer on only one side and hen...
                    Great product. Would have been happier if it came with the Walnut veneer on only one side and hence cheaper
                    by
                    • Verified Purchase
                    • Recommended
                    3 found this review helpful
                    This product is great Quality I am going to make a clock
                    This product is great Quality I am going to make a clock
                    by
                    • Verified Purchase
                    • Recommended
                    2 found this review helpful
                    Ordered board to make a shelf, cut to size. Service and shipping was impressively quick.
                    Ordered board to make a shelf, cut to size. Service and shipping was impressively quick.
                    by
                    • Verified Purchase
                    • Recommended
                    1 found this review helpful
                    Ordered three panels. Two were warped. Was disappointed and caused me some headaches with my proj...
                    Ordered three panels. Two were warped. Was disappointed and caused me some headaches with my project. However, Columbia Forest Products kindly sent me two more panels, free, to replace the warped ones. Great customer service. Picture is one of the panels used as part of a dresser (the top).
                    by
                      • Recommended
                      11 found this review helpful
                      very thin veneer.four corners were damaged due to packaged very poorly. all of the side were dama...
                      very thin veneer.four corners were damaged due to packaged very poorly. all of the side were damaged. I ordered nine panels and all nine of them are damaged. they need to fix the packing to protect the panels.
                      by
                        5 found this review helpful
                        Showing 1-10 of 218 reviews

                        Frequently Bought Together

                        +
                        +
                        Price:
                        $4099

                        Compare Similar Project Panels

                        current product
                        3/4 in. x 2 ft. x 4 ft. PureBond Walnut Plywood Project Panel (Free Custom Cut Available)
                        3/4 in. x 2 ft. x 4 ft. Birch Plywood3/4 in. x 2 ft. x 4 ft. Europly Walnut Plywood Project Panel (Free Custom Cut Available)3/4 in. x 2 ft. x 8 ft. PureBond White Oak Plywood Project Panel (Free Custom Cut Available)
                        BrandColumbia Forest ProductsHandprintColumbia Forest ProductsColumbia Forest Products
                        Name3/4 in. x 2 ft. x 4 ft. PureBond Walnut Plywood Project Panel (Free Custom Cut Available)3/4 in. x 2 ft. x 4 ft. Birch Plywood3/4 in. x 2 ft. x 4 ft. Europly Walnut Plywood Project Panel (Free Custom Cut Available)3/4 in. x 2 ft. x 8 ft. PureBond White Oak Plywood Project Panel (Free Custom Cut Available)
                        Price
                        $4099
                        $4494
                        $7499
                        $9099
                        Ratings
                        (218)
                        (276)
                        (66)
                        (75)
                        Nominal Product Thickness (in.)3/43/43/43/4
                        Nominal Product Width (ft.)2222
                        Nominal Product Length (ft.)4448
                        Project Panel TypeHardwood PlywoodHardwood PlywoodHardwood PlywoodHardwood Plywood
                        Exposure DurabilityInteriorInteriorInteriorInterior
                        Plywood FeaturesPaintable,Sanded,StainablePaintable,StainablePaintable,Sanded,StainablePaintable,Sanded,Stainable
                        View ProductView ProductView ProductView Product