#1 Home Improvement Retailer

Internet # 204637004

Model # 2557

3/4 in. x 2 ft. x 8 ft. PureBond Red Oak Plywood Project Panel (Free Custom Cut Available)

$74.39
Limit 90 per order
Apply Now
Pay $49.39 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Free custom cut available - See details below
  • Red Oak plywood strength, performance and durability
  • Red Oak veneer on both sides of plywood
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
caret
Product Details
  • Free custom cut available - See details below
  • Red Oak plywood strength, performance and durability
  • Red Oak veneer on both sides of plywood
About This Product

The beauty and warmth of natural hardwood shines through on these PureBond Red Oak Plywood panels from Columbia Forest Products. Assembled using a soy-based PureBond technology, these 3/4 in. x 2 ft. x 8 ft. sheets feature American-grown timber throughout with decorative red oak face and back veneers that produce stellar results on DIY woodworking projects. Using a proper saw blade, these sheets can be custom-cut to suit an assortment of carpentry applications, including construction of furniture, shelves, bookcases, built-in cabinets, media centers, headboards and more. This formaldehyde-free plywood is a cost-competitive alternative to potentially health-hazardous UF boards that may release air-degrading fumes over time. It's as exquisite and robust as solid hardwood but without the expense and heft.

  • CLICK HERE TO HAVE YOUR PLYWOOD CUSTOM CUT. Please complete your purchase after the form has been submitted. Note: The form is not available on mobile devices.
  • 7-ply project panel is assembled with a smooth, patch-free red oak face veneer
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • The decorative top and bottom veneers, measuring approximately 1/42" thick, exhibit the beauty and timeless quality of natural hardwood and are suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 3/4 in. x 2 ft. x 8 ft.; Actual: 0.703 in. x 24 in. x 96 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 36 lbs.
  • Grade: B-2 - See Grading Guide for additional information
  • Available in additional species- Alder, Cherry, Cedar, Hickory, Maple, Mahogany, Poplar, Walnut, and White Oak
  • Return Policy
  • California residents
     see Prop 65 WARNINGS
Product ID #: 204637004Internet #: 730232002557Model #: 2557
caret

Specifications

Dimensions

Actual Product Length (in.)96.000 inActual Product Thickness (in.)0.703 in
Actual Product Width (in.)24 inNominal Product Length (ft.)8
Nominal Product Thickness (in.)3/4Nominal Product Width (ft.)2

Details

Exposure DurabilityInteriorPack Size1
Plywood FeaturesPaintable, Sanded, StainablePlywood Product TypeProject Panels
Project Panel TypeHardwood PlywoodReturnable90-Day

Warranty / Certifications

Manufacturer WarrantyProduct warranted against glue or bond failure. Product replacement provided.
caret

Questions & Answers

86Questions
caret
Q:How do you put in custom measurements?
by|Feb 3, 2024
1 Answer
Answer This Question

A:  Hi, Under the product, in "product details" section, you can select that and a custom cut form will then pop up.

by|Feb 5, 2024
    caret
    Q:Can it be cut into half to make two 13” deep sections
    by|Dec 28, 2023
    1 Answer
    Answer This Question

    A:  Hi, not exactly sure what you are meaning by this. Yes, you can request to have to 13'' sections. If I'm not answering that right, you can reach me at alec.neugent@cfpwood.com so i can help you out.

    by|Dec 30, 2023
      caret
      Q:I would like to make a flat pilates mat that will have 2? foam covered with vinyl fabric. Size 24?x 80?. The mat would need to be able to withstand someone standing on it too. Which plywood would be recommended? Strictly indoor use. Thanks
      by|Sep 20, 2023
      1 Answer
      Answer This Question

      A:  Hi Ellen, Any of the 3/4" options from Columbia Forest Products would work for you. The 3/4" plywood is strong enough to hold a person standing on it. I envision the panel lying flat on the ground.

      by|Sep 22, 2023
        caret
        Q:Can these be used for inside steps? If not pls recommend the best load bearing wood that be used for up and down regularly thanks
        by|Sep 9, 2023
        1 Answer
        Answer This Question

        A:  I wouldn't recommend our product for stairs as is it intended for cabinetry, closets, etc. I would try checking with someone at Home Depot. I'm sure they would know exactly what to recommend for what you are needing.

        by|Sep 11, 2023
          Showing 1-4 of 86
          caret

          Customer Reviews

          4.7 out of 5
          • 4.7 out of 274 reviews
          • 95% recommend this product
          Filter by:
          Showing 1-10 of 274 reviews
          Red oak panel had slight bow but otherwise OK
          The 3/4" x 2' x 4' red oak panel had slight bow and did not suit my needs, so I returned it to my nearest Home Depot store. The delivery was a day and a half earlier than expected. However, the driver left the package in the grass near the highway, in a field adjacent to my driveway. I discovered it only after checking my email late that afternoon. That location is approximately 900 feet from my house. It was on the ground about 5 hours which may have contributed to the slight bow.
          by
            • Recommended
            1 found this review helpful
            This was an incredible value. It was carefully cut to my specifications and mailed to the house. The cuts were accurate. I used it to repair a rotted out cabinet due to a leaky valve. It is higher quality than what was there already.
            by
            • Verified Purchase
            Columbia Forest Products can be depended upon for its quality products. As a cabinetmaker, I pref...
            Columbia Forest Products can be depended upon for its quality products. As a cabinetmaker, I prefer plywood with a solid core rather than MDF. This 2 foot by 4 foot panel was absolutely level, square and plumb. There were no surface defects, and I didn't need to prep the board before I used it. The panel cut easily and did not "feather." It remained stable through the veneering process. My customer was impressed with the finished tabletop. Kudos also to the Home Depot for offering shipping on these craft size panels. My panel arrived in a reinforced shipping box to protect the panel. No mashed corners! Other competitors do not offer shipping at all. Home Depot's price was also lower than the competition by several dollars. This was an all-around great experience.
            by
            • Verified Purchase
            • Recommended
            1 found this review helpful
            The custom cut was perfect. The wood is very high quality. Thank you. My daughter turned this ...
            The custom cut was perfect. The wood is very high quality. Thank you. My daughter turned this into a really nice desk extension for me.
            by
            • Verified Purchase
            • Recommended
            I am very happy with the 3/4 x2ft. x4ft. red oak plywood cut to size and sanded to a very ...
            I am very happy with the 3/4 x2ft. x4ft. red oak plywood cut to size and sanded to a very smooth surface. It is for a custom desk I'm building for my Sweeties Birthday. . I ordered 1" x 2" red oak boards for trim to glue around the edge of the red oak plywood. and stained both with a rich finish and several coats of varnish. Edge trim took very little sanding to match up with top. The desk plans came from Pinterest farm style desk with a few changes of adding drawers instead of cubby's and putting drawers on left side for my left handed Sweetie. This was my first job to build anything like this, I was very pleased the way it turned out.
            by
            Response from CFP Customer ServiceJul 18, 2019
            That is great to hear! I am glad our products worked well for you.
              • Recommended
              3 found this review helpful
              A fine, high quality piece of ply. That I'm using for drawer fronts. Will definitely order more f...
              A fine, high quality piece of ply. That I'm using for drawer fronts. Will definitely order more for other projects, but this arrived with 2 slightly crushed corners. I'm sure it was from shipping. Since I don't need every square inch this time, I'm keeping it. Overall very happy with the quality.
              by
                • Recommended
                1 found this review helpful
                Great Plywood Project Panel
                This 3/4in.x 2ft.x4ft. Red Oak Plywood is perfect for most small projects. You can carry this size panel in the back seat or trunk. The "half sheet" panel is ideal for handling. Light weight and easy to carry anywhere. The packaging is such that the panel is well protected for shipping and handling. The edges are void free making the edges easy to sand and paint or stain. It’s a water-resistant compilation that tolerates moisture better than formaldehyde-bonded plywood, while the 7-ply layering makes it less likely to warp than solid hardwood. The decorative hardwood panel is assembled with a soy-based PureBond adhesive that won’t emit airborne contaminants over time, as UF-constructed plywood is prone to do. These panels are available in larger sizes.
                by
                • Recommended
                2 found this review helpful
                Very Good
                Overall, this was a very good quality sheet of plywood. The veener did have one damaged spot (see photo), hence 4 stars. Otherwise it was a very good sheet and was very flat.
                by
                • Recommended
                2 found this review helpful
                Just the right size you need for projects.
                Here's a product that comes in just the size you need without having to deal with full sheets, extra expense, and waste. It's easier to transport, and not too heavy. I received one of the 2x4 panels, Red Oak, in 3/4" thickness. The 3/4" ply was strong enough to be used as shelving and would work fine for any type of sturdy application. Be sure to use a fine plywood blade in the circular saw to get a nice fine cut, with very little splintering. Edges sanded fine. Veneer is a good thickness. I did not have a chance to finish mine yet, but it appears that both sides of this sheet are ready for some stain and several coats of Varathane (or equivalent). Good quality grain. It handled screws with no issues so the quality of the laminates and layers were good (no pockets). Overall, it got the job done, and looks great to boot!
                by
                • Recommended
                7 found this review helpful
                by
                • Verified Purchase
                Showing 1-10 of 274 reviews