A:  Thank you for posting your inquiry. Because you did not provide sufficient background information about your application, it is difficult to provide a more detailed response your question. Per product label and supporting product literature: 1.Surface must be clean, dry and free of dirt, oil and loose material. De-gloss surface if necessary for best adhesion. 2. Surface, wood filler and air temperature should be above 40 F. 3. If staining, test wood filler with desired stain on scrap wood before filling to ensure desired stain color. Stain before filling with wood filler, then use stain to develop desired final finish. 4. Stir product with putty knife before application. For squeeze tubes, knead the tube prior to cutting and extruding material. 5. Apply wood filler into area to be filled. Press firmly into place using a putty knife or tool. 6. Avoid overspreading filler on surrounding surfaces. Overfill slightly to allow for sanding and settling. Most repairs require just one fill. Larger and deeper holes may require more than one application. 7. For larger and deeper holes, apply thin layers to build up thick sections. Allow wood filler to dry before applying next layer. 8. Allow to dry thoroughly before sanding: approximately 3 to 6 hours for shallow fills up to 1/8” and 36 hours for deeper fills 1/4” and over. Sand with medium sandpaper. 9. May be painted with latex-based paint immediately after sanding, or after 12 hours if using an oil-based paint. 10. Exterior applications and applications subject to water exposure must be sealed with a waterproof coating. 11. Exterior applications must be coated with latex or oil-based paint or solid color stain. 12. Reseal container tightly with lid. 13. Keep from freezing. Should you have any additional questions or require further assistance, please contact DAP’s Technical Customer Service Department at 888-327-8477.

A:  yes

A:  Thank you for posting your inquiry on DAP Plastic Wood All-Purpose Latex Wood Filler. As with any hard setting wood repair filler, they should not be applied to joints, seams, or other areas prone to movement, as the filler would likely crack. Should you have any additional questions or require further assistance, please feel free to contact DAP’s Technical Customer Service Department at 888-327-8477.

A:  Thank you for posting your inquiry on DAP Plastic Wood All Purpose Wood Filler (Squeeze Tube). As indicated on the product package label and supporting product literature: "Can be sanded, planed, cut, drilled, screwed & nailed". Should you have any additional questions or require further assistance, please free to contact DAP’s Technical Customer Service Department at 888-327-8477.

A:  Thank you for posting your inquiry on DAP Plastic Wood All Purpose Wood Filler (Squeeze Tube). As indicated on the product package label and supporting product literature: "Stainable & paintable". Should you have any additional questions or require further assistance, please free to contact DAP’s Technical Customer Service Department at 888-327-8477.