#1 Home Improvement Retailer

Internet # 204988148

Model # DWHT83187

Store SKU # 1000039974

36 in. 600 lb. Trigger Clamp w/3.75 in. Throat Depth

$51.97
Apply Now
Pay $26.97 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • 36 in. X-large trigger clamp
  • Designed for the professional
  • Trigger clamp one handed operation
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
caret
Product Details
  • 36 in. X-large trigger clamp
  • Designed for the professional
  • Trigger clamp one handed operation
About This Product

This DEWALT 36 in. X-Large Trigger Clamp is intended for use with one handed operation jobs. The clamp converts to a spreader and with its removable jaw pads it protects work surfaces. The tough re-enforced nylon body makes wear and tear difficult.

  • 36 in. X-large trigger clamp
  • Designed for the professional
  • Trigger clamp one handed operation
  • Limited lifetime warranty for added peace of mind
  • Shop All Dewalt Tools
  • Return Policy
Product ID #: 204988148Internet #: 076174831870Model #: DWHT83187

Additional Resources

Shop All DEWALT
From the Manufacturer
caret

Specifications

Dimensions

Jaw Width (in.)3.75 inThroat Depth (in.)3.75 in

Details

Clamp TypeTriggerClamping Strength (lb.)600
Duty RatingStandardHand Tool TypeClamp
Individual/SetIndividualMaterialResin
Maximum Opening (in.)36 inReturnable90-Day
Tools Product TypeHand Tool

Warranty / Certifications

Manufacturer WarrantyLimited Lifetime Warranty
caret

Questions & Answers

7Questions
caret
Q:What is the width of the bar ?
by|Dec 8, 2020
1 Answer
Answer This Question

A:  Hello Tinker63 Thank you for your contact. We apologize for any trouble or inconvenience in finding information. The DWHT83193 bar width is one inch. With the jaw on the bar, the width is 1.35 inches, Best Regards Sherri C DEWALT

by|Apr 2, 2021
    caret
    Q:What is the width of the bar ?
    by|Dec 8, 2020
    1 Answer
    Answer This Question

    A:  Hello Tinker63 Thank you for your contact. We apologize for any trouble or inconvenience in finding information. The DWHT83193 bar width is one inch. With the jaw on the bar, the width is 1.35 inches, Best Regards Sherri C DEWALT

    by|Apr 2, 2021
      caret
      Q:The discription indicates a 3.75" throat depth but the specifications indicate a 3.25" throat depth. Which is it?
      by|Jul 20, 2019
      2 Answers
      Answer This Question

      A:  There are two different clamps. One with each measurement. Check your receipt and see which one you got.

      by|Jul 21, 2020

      A:  The DWHT83193 has a throat depth of 3-1/4".

      by|Nov 10, 2023
        1 found this answer helpful
        caret
        Q:How much does this product weigh?
        by|Jul 8, 2019
        4 Answers
        Answer This Question

        A:  not much, depends on the size, easy to use one handed.

        by|Sep 17, 2020

          A:  less than 2 lbs.

          by|Sep 17, 2020
            1 found this answer helpful

            A:  Sans packaging, 1 pound, 5.7 ounces.

            by|Sep 17, 2020
            1 found this answer helpful

            A:  2 lbs

            by|Sep 17, 2020
              1 found this answer helpful
              Showing 1-4 of 7
              caret

              Customer Reviews

              4.7 out of 5
              • 4.7 out of 467 reviews
              • 92% recommend this product
              Filter by:
              Showing 1-10 of 467 reviews
              fixed end exploded
              Bought to spread sling chair replacement fabric. The fixed end exploded as shown before the fabric could be spread to chair width. Everything is plastic except the black bar so I am not really surprised.
              by
              Response from DewaltProductExpertDec 11, 2023
              Hello Walter. I appreciate your feedback on the 36 in. 600 lb. Trigger Clamp w/3.75 in. Throat Depth DWHT83187 and I'm sorry to hear that the fixed end exploded. Your satisfaction is our top priority. Please contact support at WECARE@sbdinc.com and reference ticket 8708442 so we have all information available from your review. I look forward to hearing from you so we may assist you with a solution.
              Thanks, Mike DEWALT.
                Nice clamps
                well made, easy to use. 600lbs is a little low. just a little more material would result in an impressive clamping force. I'll probably buy more of these eventually
                by
                • Verified Purchase
                • Recommended
                DEWALT….This is a great clamp. Better than I expected. This clamp is a Beast it will hold anythin...
                DEWALT….This is a great clamp. Better than I expected. This clamp is a Beast it will hold anything in place. The Jaw width and throat depth of 3.75”, the 36”opening, and 600 lbs clamping pressure all reasons why I bought them this clamp converts to a spreader in seconds and the pads prevent marring my work. I use them for medium to large projects. Its reasonable price and ease of use for a large heavy duty clamp like this allows me to have a few of them around my garage/shop
                by
                • DIY
                • Verified Purchase
                • Recommended
                Good set of clamps
                These clamps work really well. I've had them for about a year now and used them on multiple projects. The clamps are lightweight and the trigger is easy to squeeze. I have not had any problem keeping pressure on anything. They even held PVC pipe down well while I cut it with a saw without slipping. The rubber pads are a bit large sometimes and can get in the way. My only complaint with these clamps is the release is a little tight. I usually have to manipulate it a little bit to get the clamp to slide backwards. It's not a deal breaker though since these clamps do hold so well. They do meet my expectations. Please hit the thumbs up if this was helpful.
                by
                  3 found this review helpful
                  clamp missing part
                  Picked up this clamp curbside in Pearl City, HI. I didn’t realize until i got home that it was missing the front end of the clamp!
                  by
                    • Recommended
                    excellent product.
                    excellent product.
                    by
                    • Verified Purchase
                    • Recommended
                    It was wonderful until one of the pads was scraped off and disappeared and the roll pin in the sh...
                    It was wonderful until one of the pads was scraped off and disappeared and the roll pin in the shaft shifted and prevents the movable end from being re-configured. Now it's stuck as a clamp and DeWalt does not offer replacement pads. :-( I suggest you instead buy the Irwin 36" clamp since Irwin does offer replacement pads. (both are brands of Stanley Black and Decker)
                    by
                      1 found this review helpful
                      These are awesome, butt simple to use one handed, and they hold very well. Note: be careful when ...
                      These are awesome, butt simple to use one handed, and they hold very well. Note: be careful when using them for welding, it's easy to forget that the feet are plastic and the heat does bad things to them. I use them for everything as an extra hand when working alone. Other than the heat issue they are very durable. I just wish they were a little less expensive, I have 35 of them of various sizes and that was quite an investment.
                      by
                      • Verified Purchase
                      • Recommended
                      Great clamp. For the size it has a great weight. Extremly easy to use. It clamps with a lot of fo...
                      Great clamp. For the size it has a great weight. Extremly easy to use. It clamps with a lot of forse. After the stroke i had i can use 100% one hand and 50% the other hand. So for that reason i'm using this clamp.
                      by
                      • Verified Purchase
                      • Recommended
                      My son in law is thrilled to have 2 of...
                      My son in law is thrilled to have 2 of these trigger clamps for his furniture making business! The Home Depot online and shipping experience was effortless!!
                      by
                      • Verified Purchase
                      Showing 1-10 of 467 reviews

                      Compare Similar Items

                      current item

                      Clamp Type

                      Trigger

                      Trigger

                      Trigger

                      Trigger

                      Jaw Width (in.)

                      3.75 in

                      3.75 in

                      1.370 in

                      3.25 in

                      Clamping Strength (lb.)

                      600

                      600

                      600

                      600

                      Hand Tool Type

                      Clamp

                      Clamp

                      Clamp

                      Clamp

                      Throat Depth (in.)

                      3.75 in

                      3.75 in

                      3.625 in

                      3.75 in