#1 Home Improvement Retailer

Internet # 204987956

Model # DWHT83191

Store SKU # 1000040007

Store SO SKU #1000643958

4.5 in. 35 lbs. Trigger Clamp with 1.5 in. Throat Depth

$12.97
  • One handed operation, removable jaw pads, & reinforced nylon body
  • Screw release allows for easy conversion to a spreader
  • Durable enough for professional use
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

Easy enough to use with 1-hand, the DEWALT Small Trigger Clamp can convert to a spreader. It features removable jaw pads and protects work surfaces. It will stand up to wear and tear, thanks to its tough re-enforced nylon body.

Highlights

  • Small trigger clamp with 35 lbs. of clamping force
  • 1-handed operation
  • Perfect for light holding, crafts and hobbies
  • Designed for the professional
  • Fastening product
  • Can also be used as a spreader
  • Removable jaw pads for use with delicate finishes
  • Shop All Dewalt Tools
  • Return Policy

Product Information

Internet # 204987956

Model # DWHT83191

Store SKU # 1000040007

Store SO SKU #1000643958

Additional Resources

Shop All DEWALT
From the Manufacturer

Specifications

Dimensions

Jaw Width (in.)

1.3 in

Throat Depth (in.)

1.5 in

Details

Clamp Type

Trigger

Clamping Strength (lb.)

35

Duty Rating

Light

Hand Tool Type

Clamp

Individual/Set

Individual

Material

Resin

Maximum Opening (in.)

4.5 in

Returnable

90-Day

Tools Product Type

Hand Tool

Warranty / Certifications

Manufacturer Warranty

Limited Lifetime Warranty

Questions & Answers

6Questions
caret
Q:Is this made in China
by|Jan 24, 2022
1 Answer
Answer This Question

A:  Yes

by|Feb 27, 2023
    5 found this answer helpful
    caret
    Q:What is the range when used as a spreader?
    by|Feb 10, 2019
    6 Answers
    Answer This Question

    A:  When used as a spreader, the DWHT83191 has a max jaw opening of 4-1/2".

    by|Sep 21, 2022
      4 found this answer helpful

      A:  As long as the bar which is about 5”.

      by|Jan 28, 2024
      6 found this answer helpful

      A:  I just bought one, and the actual spread range is 2 7/8" minimum spread to 7 3/4" maximum spread.

      by|Dec 10, 2022
        6 found this answer helpful

        A:  I would check with DeWalt. There is a dimple on each end of the bar that does not allow the trigger part to be slid off and reversed. It may not be designed as a spreader. Good luck.

        by|Sep 21, 2022
        5 found this answer helpful

        A:  Hello, Below is the list of specifications for this item. Dewalt DWHT83191 4 35lb Clamping Force Small Trigger Clamp Function: 1 Handed Characteristic: Converts to A Spreader and with Its Removable Jaw Pads It Protects Work Surfaces, Tough Re-Enforced Nylon Body Deters Wear and Tear Item: Bar Clamp/Spreader Spreading Range (In.): 0 to 4-1/2 Throat Depth (In.): 1-1/2 Handle Material: Resin Type: Small Trigger Clamp Capacity (In.): 4-1/2 Good luck, Benjamin

        by|Jul 21, 2023
          4 found this answer helpful

          A:  5 inches is the maximum

          by|Sep 21, 2022
            6 found this answer helpful
            caret
            Q:What is dimension "X"
            by|Oct 29, 2017
            5 Answers
            Answer This Question

            A:  4 & 1/2"

            by|Sep 21, 2022
            3 found this answer helpful

            A:  Your question reminds me of 7th grade algebra… it is not possible to solve for X without more information.

            by|Sep 21, 2022
              4 found this answer helpful

              A:  Mine measured 1 3/32".

              by|Sep 19, 2022
              6 found this answer helpful

              A:  X axis is what they are talking about.

              by|Sep 19, 2022
                3 found this answer helpful

                A:  Not sure what you are asking. The throat is 1.5 inches deep and the span is 4.5 inches. It will give 35 lbs. clamping pressure.

                by|Sep 21, 2022
                4 found this answer helpful
                caret
                Q:will this be useful if your gluing a dresser draw back together
                by|Sep 30, 2017
                5 Answers
                Answer This Question

                A:  Yes these will work fine in that application. They can be as tight as you want them with the trigger handle.

                by|Sep 21, 2022
                6 found this answer helpful

                A:  yes

                by|Sep 21, 2022
                  2 found this answer helpful

                  A:  Most likely too small

                  by|Sep 21, 2022
                  6 found this answer helpful

                  A:  If the drawer is small enough and light weight (this only spans 4-1/2 inches).

                  by|Sep 21, 2022
                    4 found this answer helpful

                    A:  It depends on the size of the drawer - you may have to get a larger clamp or even a 90 degree clamp. Look at the drawer construction and what you must piece back together. Take some measurements of what pieces must be clamped. You will want your clamp t o be a few inches larger than your measurement. Good luck on your project.

                    by|Sep 19, 2022
                    4 found this answer helpful
                    Showing 1-4 of 6

                    Customer Reviews

                    4.7 out of 5

                    • 4.7 out of 638 reviews
                    • 92% recommend this product
                    Filter by:
                    Showing 1-10 of 638 reviews
                    Love This Lil Guy
                    I love this lil guy. Strong clamping, small size, useful for so much more than woodworking. I do wish they were cheaper or came in packs with better value, but it holds up with the big boys.
                    by
                      • Recommended
                      This clamp is just the right size to fit into a 1/2" PVC pipe. The PVC pipe was held onto the cla...
                      This clamp is just the right size to fit into a 1/2" PVC pipe. The PVC pipe was held onto the clamp with some thermoplastic (Insta-Morph). Using (inxpensive) PVC pipe connectors, I can now attach anything to a table/desk/etc. including an endless list of assistive technologies (AT)!
                      by
                      • Verified Purchase
                      • Recommended
                      1 found this review helpful
                      I had tried a generic version of these little clamps, but they quickly failed. These seem more ro...
                      I had tried a generic version of these little clamps, but they quickly failed. These seem more robust, and work more smoothly than the cheapie version. For small jobs in confined areas these are a good value.
                      by
                      • Verified Purchase
                      • Recommended
                      5 found this review helpful
                      Small but very effective
                      Small but very effective
                      by
                      • Verified Purchase
                      • Recommended
                      5 found this review helpful
                      I use a lot of these clamps in my Hobby of building model airplanes. I also use these to hold too...
                      I use a lot of these clamps in my Hobby of building model airplanes. I also use these to hold tools down to my workbench
                      by
                      • Verified Purchase
                      • Recommended
                      6 found this review helpful
                      Very useful addition to the toolbox
                      I was pleasantly surprised to find how useful these little clamps were. Just enough force and so small they don't get in the way on the job or in the tool bag.
                      by
                      • DIY
                      • Recommended
                      6 found this review helpful
                      by
                      • Verified Purchase
                      Always perform never have been disappointed with these little guys for crafts
                      by
                      • Verified Purchase
                      I like the size of the front of the clamp. Fits under a board with just bench cookies
                      by
                      • Verified Purchase
                      by
                      • Verified Purchase
                      Showing 1-10 of 638 reviews

                      Compare Similar Items