#1 Home Improvement Retailer

Internet # 100086071

Model # DD208H

Store SKU # 135989

8in. x 12-Teeth Carbide Stacked Dado Saw Blade Set

$115.00
Apply Now
Pay $90.00 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Compatible with any 8" radial arm saw or table saw
  • Cuts hardwood, softwood, plywood, and melamine
  • Includes 2 blades, 2 wing chippers, shims and carrying case
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

Make splinter-free cuts and flat bottom grooves with Diablo's 8in. x 12-Teeth Carbide Stacked Dado Saw Blade Set. The set includes blades, wing chippers and shims that are designed to fit 5/8in. laser cut arbors. It includes a carrying case, two blades, two wing chippers and shims constructed from durable micro-grain titanium carbide for a design that is durable, strong and razor-sharp. Diablo's patented TiCo Hi-Density carbide ensures increased performance in each application.

Highlights

  • Perma-SHIELD non-stick coating protects blade from heat, gumming and corrosion
  • TiCo Hi-Density carbide specifically designed for each application to increase performance
  • Includes 2 blades, 2 wing chippers, shims and carrying case
  • Sharpenable blades make grooves from 1/4in. to 13/16in. in width in 1/16in. increments
  • Cuts hardwood, softwood, plywood, and melamine
  • Compatible with any 8in. radial arm saw or table saw
  • Not Compatible with SawStop Contractor Saw
  • Return Policy

Product Information

Internet # 100086071

Model # DD208H

Store SKU # 135989

Additional Resources

Shop All DIABLO
From the Manufacturer

Specifications

Dimensions

Blade Diameter (in.)

8 in

Product Height (in.)

8 in

Product Width (in.)

8 in

Details

Arbor Size

0.625 In.

Color Family

Red

Material Cut

Wood

Number in Package

1

Number of Teeth

12

Power Tool Accessory Type

Circular Saw Blade

Returnable

90-Day

Saw Blade Material

Carbide

Tools Product Type

Power Tool

Questions & Answers

111Questions
caret
Q:will this work on my DeWalt 7491 table saw?
by|Apr 8, 2024
0 Answer
Answer This Question
caret
Q:Will these blades work on the Ryobi 10 table saw and do I need anything special?
by|Oct 24, 2023
1 Answer
Answer This Question

A:  What model is your table saw?

by|Jan 22, 2024
    caret
    Q:will this work on a sawstop
    by|Jun 3, 2023
    3 Answers
    Answer This Question

    A:  If you read the specifications, you will noticed the statement what doesn't work with saw stop units.

    by|Nov 29, 2023

      A:  From what I've heard, you can use it. But you have to disable the safety feature of the saw stop. So it will be like a regular saw and won't stop if you touch it with your finger...

      by|Jul 1, 2023

        A:  Yes if you install the dado cartridge in your saw stop

        by|Jun 4, 2023
          caret
          Q:Will this fit on my ridged 10” table saw?
          by|Mar 25, 2023
          0 Answer
          Answer This Question
          Showing 1-4 of 111

          Customer Reviews

          4.6 out of 5

          • 4.6 out of 348 reviews
          • 89% recommend this product
          Filter by:
          Showing 1-10 of 348 reviews
          Amazing set of economically priced dado blades and make ideal...
          Amazing set of economically priced dado blades and make ideal cuts. Came with various shims to accommodate imperial and metric measurements. Thanks Diablo!
          by
            3 found this review helpful
            does not cut flat dado
            Did a large project that required making tongue and groove parts. The blades are not all the same diameter so there were high and low spots on both the tongues and grooves. Had to use sandpaper and chisel to make the parts fit. The difference is not a lot, maybe a few thousands of an inch, but it was enough to prevent the parts from fitting properly. This made my large project even bigger. I would not recommend this if you need nice smooth dados.
            by
            Response from DiabloProductExpertMay 24, 2021
            Thank you very much for the thoughtful feedback! We'd love an opportunity to help with this. Please contact us and we'll get started right away: call 800-334-4107 or email customerservice@diablotools.com. We look forward to speaking with you!
              5 found this review helpful
              Can't go wrong with the Diablo Stacked Dado set! This was my foray into the use of a stacked dado...
              Can't go wrong with the Diablo Stacked Dado set! This was my foray into the use of a stacked dado blade. I undertook the effort of building kitchen cabinets and I knew that to do them properly I needed the backboard to be dado'd into the side panels. My table saw is a Craftsman 113.298 and is at least 40 years old! It's also a 10" blade saw, so I was concerned about using an 8" blade. Several friends that have used stacked dado's said, "Don't go cheap! Expect to pay over $200..." All in all, I cut nearly 100 dado slots, mostly 1/2" and a handful of 3/4". The saw handled this set wonderfully! My cuts were only 3/8" deep, so the blade size different had zero impact. All of the cuts were very clean and my board fits very smoothly and the cabinets turned out amazing! Advise I'd give after you buy this is to make sure you keep consistent pressure on the board as it goes over the blade, not all boards are completely flat and I did encounter 1 cut that wasn't deep enough and it caused me to scratch my head for a long while trying to figure out what was wrong. Also, buy a new zero clearance insert for your saw at the time you get this set. If your saw is anything like mine, the blade insert is metal and the hole is not easily expandable. It's way smarter & better to have an insert sized for doing dado cuts. Don't be like me and make the cuts without an insert!
              by
              • Verified Purchase
              • Recommended
              15 found this review helpful
              Awesome set of dado blades. Bought a less expensive pair earlier on and my dados and grooves wou...
              Awesome set of dado blades. Bought a less expensive pair earlier on and my dados and grooves would have course bottoms I would have to chisel or sand out. Enter Diablo Freud dado blades. These guys cut a very smooth channel with minimal sanding needed almost effortlessly. Love love love these and looking forward to using them in my shop.
              by
              • Verified Purchase
              • Recommended
              3 found this review helpful
              This was my first ever dado set and it exceeded my expectations. I've had my eye on this for a wh...
              This was my first ever dado set and it exceeded my expectations. I've had my eye on this for a while and am so glad I finally purchased. I am a hobby woodworker at best, but this dado set has opened up so many possibilities for me. Did a trial run with it and it went so smoothly that I jumped right into my first project with it.
              by
              • Verified Purchase
              • Recommended
              2 found this review helpful
              It’s a good quality product. First time users, read carefully...
              It’s a good quality product. First time users, read carefully the installation procedure and table saw specs! Your table saw should be designed to work with dado sets and dado blades must have higher max RPM than your table saw RPM. Oh, dado set diameter should fit into the table saw.
              by
              • Verified Purchase
              2 found this review helpful
              Used to make 1/4" Dado slot cuts on the vertical dimension of 2x4's to accommodate galvanized mes...
              Used to make 1/4" Dado slot cuts on the vertical dimension of 2x4's to accommodate galvanized mesh livestock panels for goat pens. Worked very well with a basic Ryobi table saw after changing blade spacers. There are some good YouTube videos showing best practices for mounting and using Dado blades which I highly recommend if you have never worked with these tools. My application only required one of the included chippers and no shims. Picking these components to make the proper width notch was pretty easy to determine via the included instructions. My only complaint was the instructions themselves. Not the content - which was good, just the fact that a ton of info was crammed onto a small, illustrated sheet that was part of the display packaging. Would have been nice to have more detail on a separate, more easy to read sheet.
              by
              • Verified Purchase
              • Recommended
              14 found this review helpful
              Glad I bought this one..
              This blade gives a great finish cut. I've tried using a rip blade on my table saw to make dados, with multiple passes, but nothing beats an actual dado setup. So far I've only used the stacked blades for a .25" thickness. Blade is precise and the cuts are near perfect straight off the saw before sanding.
              by
              • DIY
              • Verified Purchase
              • Recommended
              26 found this review helpful
              Awesome. Perfect. Noobie.
              Never used a dado before my life. After adjusting my table saw in multiple increments I finally said screw it and bought this set. (Im making thomas the train track shelves for storage and display for my sons room). Glad I went with this one and not the cheaper one. It works real good when both blades are facing forward like they're supposed to. Lol. Yeah my first test cut I had one blade on backwards. Hey I said I was a newbie. My only complaint keeping it from getting five stars is the probted/etched sizes on the shims are not all very legible espectially rhe really thin ones. The inclusion of more durable and larger printed instructions would be better too. Anyhow...project is coming along grey thanks to this dado. My "plunging" the boards into and off of the blade shy of the ends is prolly not the safest thing to do but the end product is so much better.
              by
                • Recommended
                17 found this review helpful
                See very fine print on packaging to find instructions.
                I have just purchased this dado set, and it appears to be a good set, but I have not used it yet. I saw another review that this dado set does not come with instructions. I have found the instructions in the very fine print on the back of the packaging cardboard. See attached pictures and text below for copy of instructions. DIABLO DD208H STACKED DADO SET SAVE THESE INSTRUCTIONS 1- Setup: - Disconnect power before installing, or adjusting the dado. - Use the chart to select the components needed for width of dado. - After cleaning, place the first outside blade on the arbor, being sure rotation Is correct. - If chippers are being used, place them on next with the teeth of the chippers. aligning with the two open spaces on the outside blade. - If more than one chipper is used, rotate every other chipper 90. - If spacers are used, place only one spacer between each pair of chippers or between a chipper and an outside blade. - Install second outside blade, ensuring that the teeth of the last chipper are located in the two open spaces on the outside blade. 2- Adjusting Fit: - After installing dado and replacing the appropriate safety guards, make a test cut in a scrap piece of wood. - If fit is too tight: disconnect power, remove the outside blade, install the appropriate shims (shims not included - Shim set #SS100 is available from any Freud dealer). reinstall the outside blade and guards. and make another test cut. - If fit is too loose: disconnect power, remove the outside blade, remove the chippers, install the chippers for the next smaller sized dado, install the appropriate shims, reinstall the outside blade and guards, and make another test cut. - Repeat this process until desired fit is attained. 3- Use Both Outside Blades: - Never use the chippers by themselves, or with only one outside blade. - Not using both outside blades can cause personal injury, or damage to the tool. 4- Clean well: - Be sure all components are clean and free from dust and chips. - Chips between components may affect performance and damage tools. 5- Multiple passes: - Wide dadoes remove large amounts of material in a single pass at full depth. - Multiple passes starting at lower depth of cut may be required for proper control and safety.
                by
                  43 found this review helpful
                  Showing 1-10 of 348 reviews