#1 Home Improvement Retailer

Internet # 328053822

Model # DWV4W

Store SKU # 1010741370

Dryer Wall Vent 4 in. Powder Coated Steel White

$44.47
Apply Now
Pay $19.47 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

The DryerWallVent is a stylish, durable exterior wall vent enclosure that meets or exceeds all code requirements for safe exhaust venting of a clothes dryer. The DryerWallVent is designed to minimize airflow restriction, helping to keep lint flowing to the exterior. Integrated magnets keep the angled damper closed when the dryer is not in use, keeping pests and elements on the outside. The large vent opening provides easy access for cleaning and maintenance. The DryerWallVent is proudly made from heavy 22-Gauge Galvalume steel with a lighter gauge steel damper. The powder coating resists corrosion to withstand the test of time. Suitable for vent cover replacement in both new and existing construction

Highlights

  • Dryer wall vent maximizes the dryer's airflow efficiency and performance
  • DryerWallVent exceeds all code requirements for safely venting the dryer's exhaust
  • Easy to install in both new and existing construction
  • Angled damper closes when the dryer is not in use to help prevent birds and rodents from entering your dryer's exhaust duct
  • Constructed from heavy 22-Gauge galvalume steel with a lighter gauge steel damper
  • Easy access for cleaning and maintenance
  • Return Policy

Product Information

Internet # 328053822

Model # DWV4W

Store SKU # 1010741370

Specifications

Dimensions: H 6.5 in, W 6.5 in, D 2.6 in

Dimensions

Product Depth (in.)

2.6 in

Product Height (in.)

6.5 in

Product Length (in.)

2.6 in

Product Width (in.)

6.5 in

Details

Duct Type

4" Round

Gauge

22

Insulated

No

Material

Galvanized Steel

Pack Size

1

Returnable

90-Day

Warranty / Certifications

Certifications and Listings

No Certifications or Listings

Questions & Answers

5Questions
caret
Q:Regarding static pressure: short horizontal runs thru wall < 10', rigid pipe. 1 basement bath fan & 1 microwave fan. Small bath fan i.w.g. numbers: 0.1" @ 50CFM, 0.25" @ 36CFM, 0.53" blocked. Probably OK vs. magnets? Can go bigger if needed on bath fan.
by|Apr 1, 2024
1 Answer
Answer This Question

A:  It is fine to use the DryerWallVent with the fan rated at 0.25"H2O. However, if you opt to go with the 0.1"H2O fan, we recommend removing one of the magnets on the DryerWallvent for optimal performance.

by|Apr 4, 2024
    caret
    Q:What is the required static pressure (inches or mm w.g.) to overcome the door magnets and allow airflow? I would like to use this in a non-dryer application with a smaller blower.
    by|Mar 2, 2024
    1 Answer
    Answer This Question

    A:  The Damper Door will open with 25CFM @ 0.3"h2O. (The test was performed for up to 35' of duct). Please could you tell us how long your duct run is? Is the duct rigid or flexible? Where are you using this vent, please?

    by|Mar 14, 2024
      caret
      Q:Is this item paintable?
      by|Feb 21, 2024
      1 Answer
      Answer This Question

      A:  The recommendation is not to paint it as the paint could interfere with the hingepin functionality that opens and closes the damper door.

      by|Apr 1, 2024
        caret
        Q:I purchased the DryerWallVent and it didn't come with any mounting screws. What size screws are recommended for mounting this to the exterior wall?
        by|Feb 13, 2024
        1 Answer
        Answer This Question

        A:  Screws aren't included with the product as different substrates require using screws specific to that substrate type. The mounting holes measure 0.219".

        by|Mar 5, 2024
          1 found this answer helpful
          Showing 1-4 of 5

          Customer Reviews

          5 out of 5

          • 5 out of 12 reviews
          • 100% recommend this product
          Filter by:
          Showing 1-10 of 12 reviews
          Quality product, works as advertised and is a better solution then the plastic ones.
          by
          • Verified Purchase
          by
          • Verified Purchase
          by
          • Verified Purchase
          by
          • Verified Purchase
          Excellent quality product made in the usa
          by
          • Verified Purchase
          Nice, clean look. Sturdy gauge.
          by
          • Verified Purchase
          Vent is exactly as described, high quality and easy to install.
          by
          • Verified Purchase
          It’s extremely well made (heavy duty), it doesn’t protrude too far out from the wall. My critique is with the backside of the vent isn’t long enough to extend from the exterior wall into the interior wall, and it’s opening is sized to accommodate a male” connection to a 3-inch aluminum duct. It would be nice if there were two versions which would accept either a “male” or “female” end of existing ductwork. With that said I’m extremely happy with this product.
          by
          • Verified Purchase
          1 found this review helpful
          I bought this vent because I didn’t want plastic. I also like its low profile. Installation was easy. It is very durable and I don’t expect to have to replace it in the future.
          by
          • Verified Purchase
          Works great, easy to install, used it to rebuild our poor dryer vent layout. My kids love turning the dryer on and running to check if the vent door is open.
          by
          • Verified Purchase
          Showing 1-10 of 12 reviews