#1 Home Improvement Retailer

Internet # 325118817

Model # 50242162

Store SKU # 1009564139

2 ft. 400-Watt Equivalent Motion Sensor 18000 Lumens Integrated LED White High Bay Light 120-277 Volt 5000K

$145.34
Apply Now
Pay $120.34 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Sensor detects motion up to 26ft, select hold times & stand-by
  • Tool free center housing with direct wiring access from below
  • 120-277v, 0 to 10 Volt dimmable, mounting height up to 39 feet
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

ETi 2 ft. Low Profile LED Linear High Bay with Motion Sensor with center driver access design and excellent performance (18,529 lumens @ 134.2 LPW) makes for a great design solution for many new construction or retrofit commercial and industrial applications. ETi's innovation design teams specially engineered the center driver housing and thermal management to help maximize the total system life of high bay luminaire. An internal microwave OC sensor is included to allow for maximum energy savings, code compliance and can help qualify for maximum energy rebates. This high baycombines an array of LEDs with a diffuse optical lens system that delivers a universal light distribution optimized for most general open space applications. At the same time, the frosted diffusing lens significantly reduces direct view visual glare, brightness, and LED pixelation for superior visual comfort within the space without sacrificing performance. It is easy to install and maintenance free with no bulbs replace. Ideal for commercial & industrial applications (retrofit, remodel, new construction).

Highlights

  • Motion sensor: light turns on at 100% full brightness when movement is detected light stays on at 100% brightness afterthe moving objects leave the detection area during the hold time after the last detection, the light will be dimmed down to the stand-by dimming level of 30% after the hold-time periodexpires after the stand-by period ends, the light turns off (details in instruction guide)
  • Adjusting the motion sensor: detects motion at maximum distance 26.2 ft., detection angle: 30°-150°, hold time: 5-minutes/10-minutes/30-minutes or disable or stand-by period,
  • Center driver housing for max thermal protection & ease of installation
  • Low-profile (2.1 in.) and lightweight design (6.1 lbs.) = quick and easy installation
  • Suggested mounting height maximum 39.3 feet (ceiling mounted)
  • Each housing end cap includes a single 1/2 in. knockout for thru-wire installation
  • 18,000 Lumens of brightness using 138-Watt of electricity
  • 5000K Daylight color temperature of light output
  • 120-277 Volt
  • Dimmable - 0-10 Volt DIMMER SWITCH ONLY - Requires separate low-voltage wiring run - Suggested dimmers such as LUTRON: DVSTV-453PH-WH or DVELV-300PH-WH
  • Formed steel housing with frosted diffuse lens for reduced glare and visual comfort
  • Includes 28in. chain and mount hardware for easy suspension mount installation
  • Suitable for damp locations
  • Operates reliably in extreme sub-zero applications down to -40°F up to 122°F
  • Product Dimensions: 24.4in. L x 12.7in. W x 2.1in. H - Weight: 7.72 lbs.
  • Maintenance free with no bulbs to replace
  • Rated life up to 50,000 hours
  • 5 year warranty
  • Click here for more information on Electronic Recycling Programs
  • Return Policy

Product Information

Internet # 325118817

Model # 50242162

Store SKU # 1009564139

Specifications

Dimensions

Product Height (in)

2.32

Product Length (in)

24.45

Product Width (in)

12.72

Details

Actual Color Temperature (K)

5000

Color Rendering Index (CRI)

80

Color Temperature

Daylight

Color Temperature

Daylight

Color/Finish

White

Color/Finish Family

White

Commercial Light Type

High Bay

Damp/Wet Rating

Dry Rated (Indoor)

Dimmable Capability

0-10-Volt Dimming

Features

Occupancy Sensor

Fixture Color Family

White

Fixture Shape

Linear

Included

Mounting Hardware

Light Bulb Type Included

Integrated LED

Location Use

Office, Warehouse

Lumens

18000

Material

Polycarbonate

Package Quantity

1

Power Source

Hardwired

Product Length (ft)

2.04 ft

Product Weight (lb.)

7.72 lb

Product Width (ft)

1.06 ft

Recommended Mounting Height (ft.)

24 ft

Returnable

90-Day

Voltage (V)

277 V

Wattage (W)

138 W

Warranty / Certifications

Certifications and Listings

ETL Listed, Energy Star, FCC Listed, ROHS

Manufacturer Warranty

5 years

Questions & Answers

1Question
caret
Q:Will the hold time settings on this be adjustable with the Haisen remote rather than the dip switches that generally do not work well on the supplied sensor in the light?
by|Nov 16, 2023
1 Answer
Answer This Question

A:  Hello, it is recommended that you purchase this version without the built-in sensor, and then purchase the sensor separately. For more information, please contact 1-855-384-7754. https://www.etissl.com/product/138w-linear-high-bay-0-10v-dimmable-dlc-premium-copy/

by|Nov 17, 2023
    Showing 1-1 of 1

    Customer Reviews

    4.9 out of 5

    • 4.9 out of 10 reviews
    • 100% recommend this product
    Filter by:
    Showing 1-10 of 10 reviews
    Good compact high powered light motion sensing light
    This light is probably the brightest light I have ever seen. It easily lights an entire garage well. The motion sensor has two levels referred to as hold and standby. When motion is detected, the light will come on to full intensity and remain at full power for the "hold" time. After the "hold" time has expired, the light will switch to standby, which is 30% of full brightness. After the standby time has expired the light will switch off. The setting are for 5, 10, or 30 minutes, or always on (disabled). I wish the light had a light sensor, so that it wouldn't go on in the middle of the day, when its not needed. that's about the only gripe I have with it. For mounting you can mount it directly to a box, or suspend by it by the supplied chain. The literature states 2.1." However, this is misleading. At the top of the light is a bracket, as shown in the photos. This bracket, which doubles at a junction box adds about 1.5" (total 3.5") to the height of the light. If you use the chain brackets connected directly to hooks, you are looking at about 6" of total height. Lastly, the screen that holds the front compartment closed (next to the light sensor in the photo) is a 5mm allen screw. So you will need an allen wrench when mounting this light.
    by
    • Recommended
    Excellent Light for barns, garages, workshops or overhang
    The ETi LED High Bay light was the perfect light to use above my workbench. I did not need the LED to be a motion sensor light, so I wired it to come on with a switch. The 18,000 lumens do great lighting the bench area. Installation was straightforward and took about 30 minutes to install. The light fixture is very lightweight, so no extra bracing was needed. LEDs are very efficient, and the light is rated to work for 54,000 hours. ETi is so sure of this light and fixture’s quality that they have a 5-year warranty—great product for any garage, barn, or overhang.
    by
    • Recommended
    Easy to wire, easy to hang, set it and forget it. trims down the power bill.
    The ETi two foot long 400 watt equivalent motion sensing led light is a very versatile fixture for any high bay instillation. It has brackets for hanging and can be wired for any socket you need. The motion sensor is a handy and lets you save money by dimming the light when no one is in the area. There are also timers that can be adjusted for how long it senses that no one is in the area any longer and then it will dim.
    by
    • Recommended
    Set it and forget it: Great Fixture
    Many great features and the best is the motion sensing capability. It'll go in the garage where my roll-up door is not connected to an automatic light unit. This will make night time arrivals much safer (for the truck and me). The fixture has other great features too: 1/ LED and boasting a 54,000 lifetime. 2/a dimming capability (but why?) HOWEVER you must run low-voltage lines to enable. 3/ has a very low profile @ a tad over 2 inches (so it will fit in most installations). 4/ the LED 'hold' and 'standby' times are switchable between 5/10/30 minutes and 'on'. 5/ suitable (i.e., useable) in damp locations (think unheated garage). Here's another thing I like about this Hi-Bay, the unit is made of three components and 'married' together. Not a single, pressed steel housing. This is well made!
    by
    • Recommended
    Bright Light
    With a metal garage building, the need for bright lights is a must. I have used several other high bay lights before, but never one like this one with the motion detector. It is a nice feature that allows for me to work around the house while going in and out of the garage without having to constantly turn the lights on and off. It is just when I am working on my truck or in the yard and my hands are full of dirt and grime that the motion detector saves the wall from really bad looking marks. You can set the times of the light for various time duration. This is done on the front of the light, so there is no need to take the fixture down to adjust it. This high bay light also has a flush ceiling mount with a junction box as well. I have not seen that, but in a garage with a sheetrock ceiling, this would still work great without hanging too low in the garage. I will be getting more of these to use in the barn as well. Very handy.
    by
    • Recommended
    Nice design
    I have a shop that has a 14’ ceiling. At times I’m going into the dark with full hands, so not having to try to get the light switched on is nice and being a high bay light, I can mount it up high where it’s not in the way. It’s 138 watts, so produced a good amount of light. At 14’ high I wouldn’t plan on doing surgery, but it gives a fair amount of light. It has two slide switches for setting up delays to fit your needs. It is made in Vietnam. The voltage is 120-277 vac. It comes with chains for hanging or a bracket to mount right to a wiring box. The downside?? It has to be hard wired. I suppose you could get the hardware and put a cord on it, but the initial design is hardwire.
    by
    • Recommended
    Adjustable Motion Sensor equipped makes a difference.
    This is one of several lights of this type I have in my garage. This one comes with some features that I don't have on any others. The Motion Sensor is one. It is a really nice feature. It has several different settings that allow the light to come on, stay on, dim to 30%, and turn off automatically depending on your needs. The setting buttons are easily used and located on the front of the fixture. One other thing I particularly like is the choice of mounting methods available. You can choose, Suspension with chains, pole mount using a 1/2" or 3/4" pole, or surface mount using the provided mount bracket. I use chains so I can relocate the fixture easily. This fixture comes with a very substantial link chain to use for mounting. 18000 Lumens is a tremendous amount of light and makes it easier to work no matter where you use it. Over a particular workstation it is all the light you will need. Mine is going to be located in the area of my walk-in door so it can light my way in and out and turn itself off when I leave.
    by
    • Recommended
    1 found this review helpful
    Easy to install motion light with adjustable times
    I own a large attached awning which I park a truck under and it is often dark when I make it home. So a motion light that is high mounted would help out. The ETi 2ft LED motion sensor light was a great fit. The high bay LED light comes with hanging chains, is lightweight, and is very bright at 18,000 lumens (5000K). You can select the “hold time” and separately the “standby time” to vary from 5 minutes, 10 minutes, 30 minutes or just stay on. Wiring it up took a few minutes and the install on a rafter take a few additional minutes. Overall, this LED light was easy to hook up, mount via the provided chains and is very bright with front accessible selector switches to adjust times.
    by
    • Recommended
    Motion shop light
    This 2 ft. high bay light is the first I have seen with motion detection. It could be the perfect solution to a hands free approach to your shop area. It is a bright 5000K light and will light up s large space when mounted high on your ceiling. It has a versatile mounting system so it can be suspended or flush mounted. Motion detection up to 26 feet allows you to mount it high if needed and the adjustable hold time adds more versatility. A great little light.
    by
    • Recommended
    Bright white light up any area
    I was so looking forward to this light fixture. My garage is very dark even with 1 little light . I installed the ETI 400 watt equivalent motion sensor light in about 30 min. Very easy, great instructions included. It is 18000 lumens is a LED bright and I mean bright white light. The moment it senses any movement the light turns on . Its so bright that it lights up a 2 car garage. I can now do projects with just the ETI light. Coming home at night is great now the garage light up beautifully. I cant say enough good things about this fixture. I love it.
    by
    • Recommended
    Showing 1-10 of 10 reviews

    Compare Similar Items

    current item

    Light Bulb Type Included

    Integrated LED

    Integrated LED

    Integrated LED

    Integrated LED

    Commercial Light Type

    High Bay

    High Bay

    High Bay

    High Bay

    Recommended Mounting Height (ft.)

    24 ft

    25 ft

    30 ft

    20 ft

    Lumens

    18000

    25054

    30498

    16000

    Location Use

    Office, Warehouse

    Garage, Warehouse

    Garage, Warehouse

    Office