#1 Home Improvement Retailer

Internet # 204273989

Model # 802597

Store SKU # 797059

Store SO SKU # 1003395841

1-1/2 in. x 96 in. Aluminum Angle with 1/16 in. Thick

$29.93
Apply Now
Pay $4.93 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Versatile uses include bike racks, bed frames, and motor mounts
  • Boasts lightweight and durable aluminum construction
  • Includes 1 bar that can easily be cut to desired length
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
caret
Product Details
  • Versatile uses include bike racks, bed frames, and motor mounts
  • Boasts lightweight and durable aluminum construction
  • Includes 1 bar that can easily be cut to desired length
About This Product

This metal angle is commonly used for constructing bicycle racks, bed frames, motor mounts and many other utilitarian functions. Common types of angles include: Solid, punched hole, slotted hole and solid or slotted offset. Slotted and punched hole angle is often selected for use in metal racks, storage shelving, garage door track frames and corner bracing. Angles are available in a variety of sizes and materials and can be cut to length to suit your specific job requirements.

Product ID #: 204273989Internet #: 887480025972Model #: 802597

Additional Resources

Shop All Everbilt
caret

Specifications

Dimensions: H 96 in, W 1.5 in, D 1.5 in

Dimensions

Product Depth (in.)1.5 inProduct Height (in.)96 in
Product Length (in.)96 inProduct Thickness (in.)0.0625 in
Product Width (in.)1.5 in

Details

Connector CoatingN/ACorrosion ResistantNo
Fastener TypeMetal StockFinish FamilySilver Metallic
Hardware Color FamilySilverIndoor/OutdoorIndoor/Outdoor
MaterialAluminumMeasurement StandardSAE
Metal Stock TypeFlat/ Bars/Tube/Nonthreaded RodPackage Quantity1
Product Weight (lb.)1.72 lbProduction TypeOther
Returnable90-DaySlottedSlotted
TypeUnslotted flat

Warranty / Certifications

Manufacturer WarrantyNone
caret

Questions & Answers

19Questions
caret
Q:Is this soft enough to cut with tin snips? Do you have a recommendation of how to connect pieces at 90 degrees?
by|Feb 18, 2024
1 Answer
Answer This Question

A:  This product is too thick to cut with tin snips. To ceate a 90 degree bend cut on side to the center and then bend the metal to 90 degrees. Mike

by|Feb 20, 2024
caret
Q:Can I glue this to a worn down stair nose so that I can install a vinyl plank stair nosing
by|Mar 19, 2023
1 Answer
Answer This Question

A:  For this specific use of the Everbilt 1-1/2 in. x 96 in. Aluminum Angle with 1/16 in. Thick, please contact a professional contractor.

by|Mar 24, 2023
    caret
    Q:Can this be used to flash my shower?
    by|Jan 11, 2023
    1 Answer
    Answer This Question

    A:  This Everbilt 1-1/2 in. x 96 in. Aluminum Angle with 1/16 in. can be used, but understand it is in mill finish and will get oxidized when in contact with water. Ideally it should be anodized or powder coated.

    by|Mar 18, 2023
      caret
      Q:I need this to support a 5 foot shelf of a desk from bowing downward, will this work?
      by|Jan 13, 2022
      4 Answers
      Answer This Question

      A:  You"ll need 1/8" thick.

      by|Nov 8, 2022

        A:  It is aluminium and is thin, it will depend on the weight on the shelf but you are better with the 1/8" than the 1/16".

        by|Jan 15, 2022

          A:  For the Everbilt 1-1/2 in. x 96 in. Aluminum Angle with 1/16 in. Thick, this is not a recommended use for angle.

          by|Oct 3, 2023

            A:  This one is only 1/16" thick material, I would go to 1/4" to be sure.

            by|Jan 15, 2022
              Showing 1-4 of 19
              caret

              Customer Reviews

              4.7 out of 5
              • 4.7 out of 99 reviews
              • 100% recommend this product
              Filter by:
              Showing 1-10 of 99 reviews
              I used these to cover the gap between the drywall...
              I used these to cover the gap between the drywall ceiling and attic door framing that I had just installed in my garage. Worked perfectly. Easy to cut with an angle grinder and easy to drill through. I was easily able to add nice moulding to cover this cleanly. I wasn't able to add a final picture.
              by
              • Verified Purchase
              by
              • Verified Purchase
              by
              • Verified Purchase
              nice clean stock, worked as intended
              by
              • Verified Purchase
              All the prices for the materials Home Depot supplies are significantly higher than the value of the material. The materials are customer tip offs.
              by
              • Verified Purchase
              Way too expensive for what it is. Several other items in the bill metals rack were out and this was one of few options
              by
              • Verified Purchase
              by
              • Verified Purchase
              by
              • Verified Purchase
              by
              • Verified Purchase
              by
              • Verified Purchase
              Showing 1-10 of 99 reviews

              Compare Similar Items

              current item

              Product Length (in.)

              96 in

              48 in

              96 in

              96 in

              Product Width (in.)

              1.5 in

              2 in

              2 in

              2 in

              Product Thickness (in.)

              0.0625 in

              2 in

              0.06 in

              .125 in

              Slotted

              Slotted

              Slotted

              Unslotted

              Slotted

              Production Type

              Other

              Other

              Other