Scale indicates the resistance to damage caused by outside elements.
Scale indicates the complexity of the welding process.
Scale indicates the complexity of the machining and grinding process.
Scale indicates the complexity of the bending and forming process.
A: This Slotted Angle is 14 Gauge.
A: It depends on which one you are purchasing. Just look right on the specification and it will state ghe gauge.
A: I used it to brace garage door.
A: The Everbilt 1-1/2 in. x 96 in. Zinc-Plated Slotted Angle is not intended to be used for weight bearing. A recommendation cannot be made for this use as there is no testing for this application type. Shelf brackets would be the recommendation in this case.
A: You would need to use a paint that sticks to the zinc, and such paint exists. Linseed oil works fine. The zinc is already some level of protection, though you should take caution if your attaching it to PT lumber, especially if you will have any salt in the environment (sea breeze or salted walking surface). salt+zinc+PT = corrosion. Linseed oil helps in that situation.
A: It would help but you might have to clean and remove the oil coating on it
A: This slotted angle is zinc-plated for corrosion resistance. If you want to paint it, you would need to clean / degrease the slotted angle before applying paint. We suggest speaking with a paint professional to determine the best paint for use in your application.
A: It's Zinc plated, so it will resist rust. Also, you should use zinc plated screws as well, otherwise the screws will rust. Besides, I think paint or primer does not stick well on zinc plated. The only way to prime it is to prime it with a primer that eats away the zinc plating. In that case, you defeat the purpose of the zinc plating. My opinion.
A: I don't think they will cut this for you, but check your own store. I might be wrong. The full length was what I needed so I didn't face your question.
A: Generally Home Depot does not cut slotted angle. Please check with a store associate to find out if they have the equipment for cutting steel.
|Name||1-1/2 in. x 14-Gauge x 48 in. Zinc-Plated Slotted Angle||1-1/2 in. x 96 in. Zinc-Plated Slotted Angle||2.25 in. x 1.5 in. x 72 in. Angle Slotted Offset||2 in. x 96 in. Aluminum Angle with 1/8 in. Thick|
|Product Length (in.)||48 in||96||72||96 in|
|Product Width (in.)||1.5 in||1.5||2.25||2 in|
|Product Thickness (in.)||1.5 in||0.125 in||.125 in||.125 in|
|Production Type||Cold Rolled||Other|
|THD SO SKU||1000066021||1003566179||1000766994|
|View Product||View Product||View Product||View Product|