$13400
Pay $109.00 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- Efficient PSC motor with thermal overload protection for safety
- Vertical float switch facilitates automatic operation
- Semi-open impeller allows passage of 3/8 in. solids
- View More Details
Product Details
The Everbilt 1/3 HP submersible sump pump is built with an aluminum motor housing for efficient motor cooling. The pump is available with a vertical float switch requiring an 11 in. to 18 in. minimum diameter wide sump basin. The motor is built with thermal overload protection. The pump comes with a 1-year limited warranty.
- Aluminum motor housing for efficient motor cooling
- Continuous duty, efficient 115-Volt PSC motor for lower carbon footprint; higher efficiency using less energy to operate
- 8.25 ft. cord length
- Submersible for quiet operation
- 1-1/2 in. FNPT discharge
- Semi-open thermoplastic impeller passes 3/8 in. solids
- Pumps up to 2200 GPH at 10 ft., outperforms the competition
- How to Replace A Sump Pump
- Shop All Everbilt Sump Pumps Here
- Click here for more information on Electronic Recycling Programs
- Return Policy
- California residents
Additional Resources
From the Manufacturer
Specifications
Questions & Answers
20Questions
Q:When will this be back in stock?
by|Jan 21, 2023
1 Answer
Q:Do u have a submersible pump that can hook to a garden hose
by|Nov 1, 2021
1 Answer
Q:How long are these pumps supposed to last in a residential environment. I installed one of these ...
by|Jun 28, 2021
2 Answers
Q:Can this pump replace the 1/4 HP pump in the Everbilt Sink Sump Pump 1/4 HP System or are they tw...
by|Mar 29, 2021
2 Answers
Showing 1-4 of 20
Jul 9, 2021
Horrible Float
The most important part of the pump has a major fault. Float easily pops out if the slot and is so loose that it often goes sideways and does not even activate the pump. Who designed this should be stripped of his engineering title. During this downpours i have to constantly check on the pump to make sure it does not get stack. it gets stack every hour... Horrible design. Dont buy anything that has a float that is not permanently attached to the pump. Returning it
by
Response from Everbilt Customer ServiceJul 12, 2021
Kerim,
Sorry to read about this situation, however the switch is (or should be) permanently attached to the pump. Did you try to adjust the switch during installation? Please contact our experts at 844-883-1872 as we can assist with your situation. Thanks.
Sorry to read about this situation, however the switch is (or should be) permanently attached to the pump. Did you try to adjust the switch during installation? Please contact our experts at 844-883-1872 as we can assist with your situation. Thanks.
Apr 16, 2020
Seems OK after a lot of time spent figuring why the float rod wasn't attached.
While in the end the pump saved me from a decent rain storm, unfortunately, I like others on these reviews had a float rod that was not attached to the switch bracket when I opened it two days ago. The float rod would just fall out unless the bottom end of it was on the ground. I called customer service and while they tried to be helpful the only solution seemed to be a return. After a considerable amount of time messing with it in the rain, I finally investigated the empty box (which BTW was "not damaged in shipping" per some responses to reviews) and there was this tiny tiny broken plastic pin only about 2mm thick and maybe 15mm long that had snapped (see picture). It was apparently designed to keep the float rod in its slot. I replaced it with a small nail that I bent into a "U" to keep it in place and the unit seems to be working as promised. And if the pin breaks for you, I learned the top end of the float rod can fit in the switch in two ways, but only one will give a click when the pump switch is activated. For a unit that has a sturdy metal casing, big thick wiring and weighs several pounds, to have this tiny plastic pin holding the float in place is crazy. Poor design and hopefully not indicative of the quality of the rest of the unit. Fingers crossed.
by
Response from Everbilt Customer ServiceApr 20, 2020
Keith,
Thank you for your detailed response and solution. You mentioned the quality of the parts used in making this pump and we appreciate your views on the overall design. We continue to improve products wherever needed and we thank those who take the time to give their feedback. So again, Thank You.
Thank you for your detailed response and solution. You mentioned the quality of the parts used in making this pump and we appreciate your views on the overall design. We continue to improve products wherever needed and we thank those who take the time to give their feedback. So again, Thank You.
Aug 6, 2019
This submersible pump should be installed by a qualified professional who is knowledgable about w...
This submersible pump should be installed by a qualified professional who is knowledgable about what these pumps are designed to do and the specs regarding each pump. Each one is different.
First, the electrical cord is 10' long and needs to be close to an GFCI outlet rated for the amps. The basin needs to be 10" in diameter however, 14" is better to allow you to work with the pump.
This pump is pretty light weight at under 10 lbs. I found it very easy to handle. The float is adjustible for the amount of water in the basin for shut off. Has a pretty decent pump action and the discharge does a good job filtering debris.
Instructions are excellent and give detailed diagrams for installation parameters.
by
Response from Everbilt Customer ServiceAug 9, 2019
Thank you for the detailed review. Your feedback is much appreciated.
Jul 24, 2019
Decent light duty sump pump for residential use.It says the pump is an aluminum pump but in reali...
Decent light duty sump pump for residential use.It says the pump is an aluminum pump but in reality the motor housing is aluminum and pretty much the rest of the pump and switch is plastic. The vertical switch is a magnetic trip which is fine however it seems very light duty. The minimum sump size for this model pump is 10" in diameter and 14" depth. Installation for this unit is pretty simple and straight forward. It comes with the housing threaded for 1 1/2" pipe but it also has a reducer for a 1 1/4" outlet pipe. I just think the pump is a little on the light duty side for every day use but it would be great for emergency use.
by
Response from Everbilt Customer ServiceJul 29, 2019
footeman,
We appreciate your review and feedback.
We appreciate your review and feedback.
Jul 3, 2019
Happy to give this Sump Pump the seal of approval. Well designed and pumps up to 36 gallons per ...
Happy to give this Sump Pump the seal of approval. Well designed and pumps up to 36 gallons per minute. Very powerful with it's 1/3 HP motor. The aluminum housing is also a plus, in that the unit cannot over heat. The instructions are quite clear in that you need to install it in a basin that is at least 10 inches wide, and 14 or more inches deep. One year warranty on the entire unit is an added feature. Highly recommended to all Home Depot shoppers in the market for a very well designed, and well made Sump Pump. Kudos to EVERBILT for a quality product.
by
Response from Everbilt Customer ServiceJul 7, 2019
CathyMMM,
Thank you for your review and your detailed feedback, we appreciate you taking the time to let others know how the pump has worked for you.
Thank you for your review and your detailed feedback, we appreciate you taking the time to let others know how the pump has worked for you.
Jun 19, 2019
The 1/4 HP Aluminum Sump Pump with Vertical Switch by Everbilt is an excellent product with many ...
The 1/4 HP Aluminum Sump Pump with Vertical Switch by Everbilt is an excellent product with many nice features. The 1/4 HP pump is a great value and the right size for a low need pumping situation, but can handle rainy season needs. The aluminum housing of the pump motor means better cooling and will last a very long time. The vertical switch works well in smaller basins since it won't bind up on the basin wall like a tethered float switch. The 1/4 HP pump is very strong and Pumps up to 2000 GPH at 10 ft. It comes with a 1 year limited warranty.
by
Response from Everbilt Customer ServiceJun 21, 2019
Thank you for the feedback. Hopefully this information can help a new customer in the future.
Jun 18, 2019
The Everbilt 1/3 HP sump pump is built with reinforced aluminum housing for maximum durability. T...
The Everbilt 1/3 HP sump pump is built with reinforced aluminum housing for maximum durability. The pump is designed for easy installation, and can replace a pedestal or submersible sump pump. The vertical float switch will allow the pump to fit into basins 10 in. or larger. The heavy duty motor comes with a thermal overload protection. Pumps 36 gallons per minute. Comes with a one year warranty.
by
Response from Everbilt Customer ServiceJun 20, 2019
Thanks for the review and feedback.
Jun 18, 2019
The Everbilt 1/2 HP sump pump is built with reinforced aluminum housing for maximum durability. T...
The Everbilt 1/2 HP sump pump is built with reinforced aluminum housing for maximum durability. The pump is designed for easy installation, and can replace a pedestal or submersible sump pump. The vertical float switch will allow the pump to fit into basins 10 in. or larger. The heavy duty motor comes with a thermal overload protection. Pumps 40 gallons per minute. Comes with a one year warranty.
by
Response from Everbilt Customer ServiceJun 20, 2019
sn2935,
Thanks for the details on your review. We value any and all feedback.
Thanks for the details on your review. We value any and all feedback.
Jun 15, 2019
The Everbilt 1/3hp. aluminum sump pump with vertical switch is a great little sump pump. The pump...
The Everbilt 1/3hp. aluminum sump pump with vertical switch is a great little sump pump. The pump is built with an aluminum motor housing for efficient motor cooling. It has a 8.25 ft electrical cord. I have 2 sump pumps in my basement now and this pump will be used for a backup. This pump pumps up to 2200 GPH at10ft. height. It uses the standard 1-1/2in. FNPT discharge. The switch off height is 1-3/8in. and the switch on height is 4.72in. Very nice sump pump.
by
Response from Everbilt Customer ServiceJun 18, 2019
William,
Thank you for your review and feedback. Very informative. Thanks.
Thank you for your review and feedback. Very informative. Thanks.
Jun 8, 2019
The 1/4 HP Aluminum Sump Pump with Vertical Switch is a well designed, well built and efficient s...
The 1/4 HP Aluminum Sump Pump with Vertical Switch is a well designed, well built and efficient sump pump. I ordered this product as replacement for an existing basement sump pump.
It's sturdy construction and ease of use makes it one of the best I have ever come across.
All connections, electrical and mechanical are properly sealed. The grounded power cable is of sufficient length and is secured to the body of the pump to prevent damage due to turbulence when the pump is running. Also the cable from the switch is secured to the pump's body. A very good set of instructions makes installation and maintenance an easy task.
I tested the sump pump as shown in the photos. The performance was amazing, response from the vertical switch was instant, no vibration, practicable noiseless and it emptied that bucket in a few seconds.
I like it and recommend it.
by
Response from Everbilt Customer ServiceJun 10, 2019
Tomas,
Thank you for this detailed review. We truly appreciate you taking the time to possibly inform others about this product.
Thank you for this detailed review. We truly appreciate you taking the time to possibly inform others about this product.
Frequently Bought Together
Top Rated
Price:
$13400
0/0
Compare Similar Submersible Sump Pumps
| Top Rated |  |  | Exclusive | |
| Brand | Everbilt | Wayne | K2 | Everbilt |
| Name | 1/3 HP Aluminum Sump Pump with Vertical Switch | 1/3 HP Thermoplastic Sump Pump | 1/3 HP Aluminum Sump Pump with Vertical Float Switch | 1/2 HP Aluminum Sump Pump Vertical Switch |
| Price | $13400 | $14876 | $15215 | $17700 |
| Ratings | (209) | (17) | (14) | (101) |
| Discharge Flow @ 0 ft. (gallons/hour) | 2580 | 3750 | 3600 | 4080 |
| Housing Material | Aluminum | Steel | Aluminum | Aluminum |
| Impeller Material | Plastic | Plastic | Thermoplastic | Plastic |
| Voltage | 115v | 115v | 115v | 115v |
| THD SO SKU | 1004032706 | |||
| View Product | View Product | View Product | View Product |
Explore More on homedepot.com
Doors & Windows
Electrical
Hardware
Lighting
