$38900
Pay $339.00 after $50 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- Helps to pump wastewater to a sewer or wastewater system
- Includes durable cast-iron Everbilt HDS30 3/10 HP sump pump
- Features a water-tight inlet hub with clamp for secure connection
- View More Details
Product Details
The Everbilt Pre-Plumbed Sump Basin System is ideal for basement installations, pumping below grade drainage and grey water. The system collects and pumps wastewater to a sewer or an on-site wastewater system. The system comes pre-plumbed and ready to install; no internal plumbing is required. The system features an injection molded structural foam polyethylene basin and cover that provides superior structural toughness and reliability. It includes the Everbilt Model HDS30, 3/10 HP Cast Iron Sump Pump. This Pre-Plumbed System also includes the Everbilt Inline Sump Check Valve and a water-tight molded 4 in. inlet hub.
- Features an 18 in. x 24 in., 22.5 Gal., heavy duty sump basin with a water-tight snap-in molded inlet hub
- Comes with the Everbilt HDS30 3/10 HP cast iron sump pump
- Heavy duty structural foam injection molded basin cover features a clear view removable inspection plate, the Sump DrainTrap cover drain, 1-1/2 in. threaded discharge flange, 2 in. threaded vent flange, molded reusable PVC cover seal and 8-bolts for a gas and odor tight seal
- System pumps up to 3,160 GPH
- Ultra-quiet Everbilt inline sump pump check valve
- Molded inlet hub comes with a stainless steel clamp for securing the inlet pipe
- Shop All Everbilt Sump Pumps Here
- Return Policy
Specifications
Questions & Answers
50Questions
Q:Is this a sewer pump?
by|May 22, 2023
1 Answer
Q:Can this be used as an outdoor application?
by|May 20, 2023
1 Answer
Q:Is the float adjustable? The pump looks like it?s set to switch on after only a couple of gallons , I want to fill up basin just below the inlet before pumping. Thanks
by|May 18, 2023
1 Answer
Q:I have a smaller version of this now for my laundry tub. I need this set up for my kitchen sink. Would this system handle both? What is height of the side inlet from floor? My laundry tub may be too low.
by|Apr 15, 2023
1 Answer
Showing 1-4 of 50
May 29, 2018
I installed this pre plumbed sump pump system using Home Depot's sump pump discharge system (Mode...
I installed this pre plumbed sump pump system using Home Depot's sump pump discharge system (Model # THD1090 Internet #302649051 Store SKU #1002711124 Store SO SKU #1002645025) I have a sink and washer and dryer in my finished basement. I needed to pump the drain from the sink and the washer into the sewer. The only problem is the sink and washer are below the sewer line. I used the install kit after mounting the pre-plumbed sump system into the cabinet(see pic below) then connected the washer and the sink to the sump tub, then connected the sump pump to the sewer system, the whole job only took about 3-1/2 hours using pvc plus the install kit. The install kit comes with a check valve and most everything else you need for the job. The only extra thing I had to buy was a saddle so I could run the discharge line directly into the sewer system everything is solid well made and is no louder than the washer or dryer so you barely hear it running when it works, Its been hooked up over a month so far and I haven't had any kind of leak or overflow. I couldn't be more pleased with the pump and the install system and from the looks of them they are solid and they are made to last a long time.
by
Response from JackelMay 29, 2018
Hello HomeDepotCustomer. Thanks for the review. We appreciate your business and your well presented comments!
May 22, 2018
I have an older home the has 2 separate sump pumps, that has a pipe connecting them, in the basement. The largest one (24” diameter clay tile) is right by the electrical panel and had one cover, so I covered with a piece of ¾” plywood for now. The other one is a pedestal type and the hole is shallow and only 12’ x 12’ so after a heavy rain it run quite often. I plan to replace the large one, with no cover, with this kit, because it has the cover, then eliminating the pedestal pump and covering the hole, also I’ll only have to dig the hole a little deeper to accommodate the base. Several reasons I purchased this one, it’s pre-plumbed, it has a seal cover that must be unbolted to access and it’s very large, so I’m going to add a battery back-up pump in case of a power outage. The pump in this kit, Sku 1000041119, has a 5 year warranty.
by
Response from JackelMay 22, 2018
Hello livingthedream. Thanks for the review. We appreciate your comments and your business.
May 21, 2018
This Everbilt pre plumbed sump pump is the first one I've gotten that was not just the standard s...
This Everbilt pre plumbed sump pump is the first one I've gotten that was not just the standard submersible type. All the necessary components are already contained in an enclosed bucket. This has a 3/10 hp cast iron pump. There are openings in the bucket for viewing inside, pipes and connections. It can pump up to 3,160 GPH and has a check valve.
Everbilt makes quality products and I own several. The only extra to consider is a battery to protect against power outages when the storms hit.
by
Response from JackelMay 21, 2018
Hi HGTVFAN. Thank you for the review. We appreciate your comments and your business!
May 17, 2018
The Everbilt pre-plumbed sump pump system is a very well made pump package. It is nice to find a ...
The Everbilt pre-plumbed sump pump system is a very well made pump package. It is nice to find a sump pump pre-installed in a heavy duty sump basin. I am going to replace one of my sumps with this one. I have one with a large diameter round tile used for a basin. This one comes with a 3/10 hp. Everbilt cast iron sump pump. The package includes a inline sump pump check valve and pumps up to 3,160 gph. Very good quality.
by
Response from JackelMay 17, 2018
Hi William. Thanks for the great review!
May 26, 2023
Excellent product we installed and work good All Cool Heat...
Excellent product we installed and work good All Cool Heat Plumbing & GC Inc
by
Response from JackelMay 26, 2023
Hello ESTEBAN. Thank you for your 5 Star Review!
Jul 20, 2022
That basin was split all the way down the side—I...
That basin was split all the way down the side—I had to return it
by
Response from JackelJul 20, 2022
Hi Spencer. We are sorry to read this. The basin was obviously struck with something that split it. Did your order this via thehomedepot.com or did you buy it in-store?
May 27, 2022
by
Apr 13, 2022
I replaced an older sump pump and so far no...
I replaced an older sump pump and so far no problems. Working great.
by
Response from JackelApr 13, 2022
Hi Pump guy. Thanks for the 5 Star Review!
Mar 11, 2022
by
Oct 5, 2021
Super powerful and quiet. Relatively easy to install...
Super powerful and quiet. Relatively easy to install
by
Response from JackelOct 5, 2021
Hi MICHAEL. Thank you for the 5 Star Review!
Frequently Bought Together
Exclusive
Price:
$38900
0/0
Compare Similar Submersible Sump Pumps
 | Exclusive | Best Seller |  | |
| Brand | RIDGID | Everbilt | Basement Watchdog | Little Giant |
| Name | 1/2 HP Stainless Steel Dual Suction Sump Pump | 3/10 HP Pre-Plumbed Sump Pump System | Big Combo Connect 1/2 HP Primary and Battery Backup Sump Pump System with Smart Wi-Fi Capable Monitoring Controller | WRS-6 Drainosaur 0.3 HP Water Removal Pump System |
| Price | $27900 | $38900 | $44900 | $49834 |
| Ratings | (1031) | (35) | (174) | (7) |
| Discharge Flow @ 0 ft. (gallons/hour) | 5200 | 3160 | 4400 | 2700 |
| Housing Material | Stainless steel | Cast-Iron | Cast-Iron | Cast-Iron |
| Impeller Material | Thermoplastic | Plastic | Engineered Polymer (Primary), ABS (Backup) | nylon |
| Voltage | 120v | 115v | 115v | 115v |
| THD SO SKU | 1004136666 | 1002645027 | ||
| View Product | View Product | View Product | View Product |
Related Products
Explore More on homedepot.com
Bath
Kitchen
Outdoor Living
Paint
Plumbing
