#1 Home Improvement Retailer

Internet # 203626488

Model # BHLH4WHD

Store SKU # 591999

Store SO SKU #1001505688

4 in. Hinged Louvered Vent Hood in White

$14.28
  • Ideal for use with dryer, kitchen, and bath fan exhausts
  • The hinged, louvered cap locks open for simple maintenance
  • Material is UV resistant and paintable
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

This product features a hinged louvered damper system that helps to prevent cold air, snow or rain from entering the home. The hinge system also enables the cap to open safely and easily. Once opened, the cap then locks in the open position for easy inspection and removal of lint and debris.

Highlights

  • Recessed caulk line helps to assist in a clean caulking application
  • Snap on pipe to cap assembly eliminates the need for lint trapping staples
  • Cap has a UV resistant coating that helps prevent it from discoloring
  • Cap is paintable to match the exterior of your home
  • Hoods are ideal for bathroom fan venting, dryer venting and kitchen range hood venting
  • How to Clean a Dryer Duct
  • Return Policy

Product Information

Internet # 203626488

Model # BHLH4WHD

Store SKU # 591999

Store SO SKU #1001505688

Specifications

Dimensions: H 6.0 in, W 6.0 in, D 12 in

Dimensions

Maximum compatible pipe size (in.)

4.0

Product Depth (in.)

12 in

Product Height (in.)

6.0 in

Product Length (in.)

11 in

Product Width (in.)

6.0 in

Details

Construction

Two piece

Gas Vent Pipe and Fittings Accessory Type

Dryer Vent

Material

Other

Minimum compatible pipe size (in.)

4.0

Pack Size

6

Product Weight (lb.)

0.59 lb

Returnable

90-Day

Warranty / Certifications

Manufacturer Warranty

Warranty against defects

Questions & Answers

17Questions
caret
Q:Can this be used on gas dryers exhaust
by|Feb 22, 2024
2 Answers
Answer This Question

A:  Hello and thank you for your question regarding our Hinged Louvered Vent Hood. Yes, this product can be used for gas dryer venting.

by|Feb 23, 2024

    A:  Hello and thank you for your question regarding our Hinged Louvered Vent Hood. Yes, this product can be used for gas dryer venting.

    by|Feb 23, 2024
      caret
      Q:Do the louvers open and close automatically, depending on whether the exhaust fan is on?
      by|Dec 4, 2023
      1 Answer
      Answer This Question

      A:  Hello and thank you for your question regarding our 4in. louvered Bent Hood. Yes the louvers will open and then close when the exhaust fan is on.

      by|Jan 24, 2024
        1 found this answer helpful
        caret
        Q:Can you use without tail pipe. Does unit come with tail pipe pre connected or you have to connect.
        by|Jun 7, 2023
        1 Answer
        Answer This Question

        A:  Hello and thank you for your question regarding our Everbilt 4 in. Hinged Louvered Vent Hood. The tail piece section comes in the same package and will require assembly.

        by|Jun 7, 2023
          caret
          Q:What is the inside diameter and outside diameter of the pipe?
          by|Jan 11, 2023
          2 Answers
          Answer This Question

          A:  If the inside diameter of the aluminum pipe is 12.75" and the outside diameter is 13.25", how can the dimensions be listed as Dimensions: H 6.0, W 6.0, D 12 ? I think you gave me the pipe depth. I am asking for the pipe diameter, inside and outside.

          by|May 5, 2023
            1 found this answer helpful

            A:  Hello and thank you for your question in regards to the Everbilt 4 in. Hinged Louvered Vent Hood. The inside diameter of the aluminum pipe is 12.75" and the outside diameter is 13.25".

            by|Jan 19, 2023
              1 found this answer helpful
              Showing 1-4 of 17

              Customer Reviews

              4.2 out of 5

              • 4.2 out of 188 reviews
              • 66% recommend this product
              Filter by:
              Showing 1-10 of 188 reviews
              I ordered a new washer and dryer with a new semi-rigid dryer duct from Home Depot. While I waited on delivery and installation, I looked at my old aluminum vent hood and it was in bad shape. The internal louver was unhinged and loose inside the vent and there was evidence of critters travelling through the duct work. The day before Home Depot was scheduled to deliver and install the dryer, I checked on the available vent hoods and chose the Everbilt 4 inch hinged louvered vent hood at my local Home Depot. I like that you can see the louvers from the outside if they fail and the cover is hinged for easy cleaning. Removing the old vent hood and installing the new one was about 20 minutes. The screw holes didn’t match the old one, so I drilled new holes in the brick with a hammer drill and reused the old Tapcon concrete anchor screws. The only thing that slowed me down was the folding the aluminum pipe. The grooves on each long side just didn’t look like they would go together, but they do. Years ago, I spent about an hour drilling less than an inch in concrete and burning up several masonry drill bits using my regular drill. I borrowed a friends hammer drill and drilled the 4 - 3-inch-deep holes I needed in about 10 seconds each. Right after that, I bought a hammer drill!
              by
              • Verified Purchase
              didn’t receive right item from delivery
              Orderd the hinged louvered vent hood white and recieved the deflecto replacemtn hood
              by
                • Recommended
                Don’t buy this one
                The way they formed the sheet metal, it will not fit into the vent recess per design. They need to enlarge the I.D. Of the mold used to form the vent, or provide a tube that fits.
                by
                  2 found this review helpful
                  Very convenient vent and tube at economic price.
                  Fortunately for me this has same hole pattern as #BPMH4BLKHD6. 'easy' to install & offers nice way to clean. Many people complain aluminum pipe doesn't fit. Easy way is to insert 3/4 of pipe then dent the tube at/near forth slot then it'll go in. Then simply reach in and 'undent' the tube. Most important is that the plastic standoffs are in all 4 slots. The latch isnt as secure as I'd like but I expect cap will stay latched. I added easy to remove pest screen (will monitor for lint clogs).
                  by
                    • Recommended
                    1 found this review helpful
                    Very easy to install. Added a back flow insert as well and there is no air coming back into the ...
                    Very easy to install. Added a back flow insert as well and there is no air coming back into the house.
                    by
                    • Verified Purchase
                    • Recommended
                    3 found this review helpful
                    Very satisfied
                    Very satisfied
                    by
                    • Verified Purchase
                    • Recommended
                    Works as described. Had to do a little trimming, installed in a mobile home (everything is smaller).
                    Works as described. Had to do a little trimming, installed in a mobile home (everything is smaller).
                    by
                    • DIY
                    • Verified Purchase
                    • Recommended
                    by
                    • Verified Purchase
                    Kind of chintzy, and I wish it came with screws. It did the job though.
                    by
                    • Verified Purchase
                    Hinged vent allows you to clean out the exhaust vent.
                    by
                    • Verified Purchase
                    Showing 1-10 of 188 reviews