#1 Home Improvement Retailer

Internet # 300636048

Model # HRBDIS08EB

Store SKU # 1001298164

8 ft. Corrugated Washing Machine Discharge Hose

  • Discharge hose can be cut to length
  • Cut the rubber stub to match the size of your washer outlet
  • 180-degree hook helps keep drain hose in place
  • View More Details
0 in stock
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

Place your washing machine where you want with this 8 ft. Corrugated Washing Machine Discharge Hose by Everbilt. The flexible hose can connect to hot and cold water washers and go into tight areas without kinking. Cut your hose to the right size with the removable 180-degree hook.


  • Corrugated hose is more flexible and lessens the chance of kinking
  • Hose is 8 ft., including hook
  • Universal adapter on one end fits 1 in., 1-1/8 in. and 1-1/4 in., stubs
  • Removable 180-degree hook helps to hold the hose in place
  • Cut the hose length to match the distance to your drain
  • Great item for do-it-yourselfer
  • Return Policy

Product Information

Internet # 300636048

Model # HRBDIS08EB

Store SKU # 1001298164

Additional Resources

Shop All Everbilt
From the Manufacturer


Product Length (in.): 96 in


Product Length (in.)

96 in


Appliance Category

Appliance Parts

Appliance Type


Brand Compatibility


Compatible Appliance Type




Model Compatibility


Pack Size




Washing Machine Part Type

Drainage Hose

Warranty / Certifications

Manufacturer Warranty

One year

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

4.2 out of 5

  • 4.2 out of 690 reviews
  • 74% recommend this product
Filter by:
Showing 1-10 of 690 reviews
Cheap plastic
This thing is very cheap. The plastic is very flimsy. I installed the new drain hose and ran the first load. Five minutes in to the run cycle, I noticed water pooling behind the machine and when I pulled the machine away from the wall I noticed water spraying out of a pinhole in the plastic. Luckily I caught it early before it ruined the floor. Do not use this. Do not buy it.
    Absolute garbage. Broke and leaks.
    Extremely poorly made. The hose was treated with care and not touched after a professional installation, but a pinhole leak emerged on the hose itself, leaving water pooling in our basement. Garbage quality. Don’t waste your money.
      1 found this review helpful
      This is for extension not replacement
      This is perfect for my need! I don't have to move the washer closer.
        • Recommended
        This will fit multiple sizes. It works great for me
        This will fit multiple sizes. It works great for me
        • Verified Purchase
        • Recommended
        Cracked after a month. About 10 inches off the floor so it was hard to see where water was coming...
        Cracked after a month. About 10 inches off the floor so it was hard to see where water was coming from. Did a load or so before we determined it was definitely from the hose. What a mess! Cheap cheap cheap junk. Felt so when it was installed, but needed hose asap.
        Response from Everbilt ExpertOct 16, 2018
        We are sorry to hear that the washing machine discharge hose cracked. We would gladly offer you warrany assistance. Please give customer service a call with your model number for further assistance.
          6 found this review helpful
          all plastic so it won't rust. The curved part is adjustable. Nice design.
          all plastic so it won't rust. The curved part is adjustable. Nice design.
          • DIY
          • Verified Purchase
          • Recommended
          much more secure at the wall
          So both my washing machines have had the same discharge hoses for long than I’ve owned the house. And if there’s anything they tell you about plumbing hoses is that they should be replaced periodically. Granted the ones under pressure are usually stressed more (I already got those done earlier this year), but anything to prevent water damage (especially if it’s an inexpensive “fix”) is a good thing to a home owner. Also, as you can see from the one pic, the old one was held in place at the wall by duct-tape. (That wasn’t me; i just hadn’t gotten around to fix it yet.) To start, the bag says “expanded end fits 1 in, 1 1/8 in, and 1 1/4 in washing machine discharge stub”. And that’s true, to a point. My stub was 1”, and even after cutting off the large flange on the hose end, the fit felt a bit loose. However, this was not a problem after I put on the new hose and clamped it with the same high tension spring clamp that was on the older hose (I leaked checked it through a spin cycle - no leaks). As an aside, the bag mentions “Helpful Tools: Screwdriver”. What it should have said was “Channel lock pliers” (or something similar), to help you with the spring clamp you’re going to need to take off your old fitting and put on the new one. Just saying. I really like the design at the “top” end of the hose; it holds the hose in such a way that it doesn’t want to pop out of the discharge piping on the wall. Which is good, becasue that’s a good place for a surprise flood if that happens. Considering the hose I replaced was literally duct-taped into place to avoid it doing just that, it’s an improvement right there.
          • Recommended
          8 found this review helpful
          Leaked the first day I got it. I want it replaced but im worried the next one will leak too.
            • Verified Purchase
            Perfect size and worked.
            • Verified Purchase
            Showing 1-10 of 690 reviews