Black Post Latch Gate Set

On the latch of the Everbilt Black Post Latch Gate Set is a hole for the owner’s preferred padlock.

The hinge strap could also be referred to as the hinge leaf. This is the part that attaches to the gate and post. The hinge strip is the hinge strap. We seem to have a spelling error. Thank you for bringing it to our attention. The hinge barrel refers to the housing of the hinge pin. After mounting, this should be located between the post and the gate.

This Post Latch Gate Set can be used for a non-sliding barn door gate.

Yes it can.

Great product, has all parts you will need for a gate.

Yes it can, thats the reason that i bought it as well.

Yes

Stuart I would suggest you go to the local Home Depot store and look in the hardware isle. I doubt that you will find a black bolt but after almost 50 years in construction and repairing hundreds of gates the best solution is to go to the galvanized bolt section and purchase galvanized bolts in 1'4" or 3/8 inch diameter and re-drill the holes in the wood. Wood with age and the constant closing or slamming of the gates weakens the wood fibers so I would strongly suggest you get a galvanized bolts and replace all the hinge bolts with a galvanized carriage bolt or a hex head bolt. Suggestion drill the holes out to 1/4" or 3/8" for appropriate size and get bolts approximately two and a half inched long. This will accommodate the thickness of the 1/2" picket and the 1 1/2" framing posts. Also make sure you pick up the corresponding galvanized washers and make sure you put one washer against the wood before putting the nut of the back side of the fence. You can use galvanized nuts or buy regular zinc plated nylon lock nuts. Before you go to the store, just make sure you measure the thickness of the gate and framing members and allow for the thickness of the nut and washer.