#1 Home Improvement Retailer

Internet # 205047060

Model # DVBRUSHK/10RHD

Store SKU # 1000052742

$26.40
Apply Now
Pay $1.40 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Removes dangerous lint build-up
  • Reduces drying time
  • Helps extend the life of your dryer
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
caret
Product Details
  • Removes dangerous lint build-up
  • Reduces drying time
  • Helps extend the life of your dryer
About This Product

The Drill Powered Duct Brush helps to remove lint build up and debris in your dryer duct as well as other general ducting. This brush can be used manually or attached to a drill for increased power. The brush kit includes a 4 in. Dia brush head and (6) 2 ft. flexible rods that can be used to extend the brush up to 12 ft. in length.

  • Kit includes synthetic head brush and 6 rods
  • Use with or without drill to remove lint buildup
  • Helps reduce dryer time
  • Helps extend the life of your dryer
  • Return Policy
Product ID #: 205047060Internet #: 079916014944Model #: DVBRUSHK/10RHD

Additional Resources

Shop All Everbilt
caret

Specifications

Dimensions: H 3.94 in, W 3.94 in, D 145.87 in

Dimensions

Product Depth (in.)145.87 inProduct Height (in.)3.94 in
Product Length (in.)145.87 inProduct Width (in.)3.94 in

Details

Gas Vent Pipe and Fittings Accessory TypeOther AccessoryMaterialOther
Product Weight (lb.)0.756 lbReturnable90-Day

Warranty / Certifications

Manufacturer WarrantyN/A
caret

Questions & Answers

54Questions
caret
Q:Does this work with this everbilt product: https://www.homedepot.com/p/Everbilt-Drill-Powered-Dryer-Vent-Cleaning-Brush-Kit-PCPBHD/203636793 I already had that one but want to extend it further.
by|Oct 27, 2023
0 Answer
Answer This Question
caret
Q:Does this work with Model#: PCPBHD Sku#: 600221 Internet#: 203636793 ?
by|Oct 22, 2023
0 Answer
Answer This Question
caret
Q:How to connect to power drill. I don't see an adaptor in the kit
by|May 10, 2023
2 Answers
Answer This Question

A:  The rods connect to the power drill by putting in the chuck, the area that typically holds the drill bit.

by|Nov 13, 2023
    1 found this answer helpful

    A:  My drill drivers have either a hex quick connect or a 1/2 chuck which is not big enough for the rod. I took a 2-1/2 long 5/16 x8 hex bolt & cut the hex head off with a reciprocating saw. Fits my drills & easily screws into the rod.

    by|Feb 19, 2024
      2 found this answer helpful
      caret
      Q:Hi I was everbilt dryer, duct brush, unfortunately brush stuck inside OK come out
      by|Apr 16, 2023
      0 Answer
      Answer This Question
      Showing 1-4 of 54
      caret

      Customer Reviews

      4.4 out of 5
      • 4.4 out of 1,082 reviews
      • 87% recommend this product
      Filter by:
      Showing 1-10 of 1,082 reviews
      Absolutely Wonderful
      This dryer cleaning tool was incredible. Our vent was completely clogged up and this was very easy to use and cleaned the whole thing out to where it was almost shiny inside. Highly recommend.
      by
      • Verified Purchase
      • Recommended
      Works Great
      My vent is vertical just like the picture on the package. I bought 2 kits in case 12 feet wouldn’t be long enough. 12 feet was just enough to do the job, very easy to use with or without a drill. I highly recommend this vent cleaning kit.
      by
        • Recommended
        2 found this review helpful
        Fantastic Product!!!
        I read many reviews, decided to make the purchase. Easy to use! Attaching rods to a drill did the extra work. Dryer should dry MUCH better now huh
        by
          • Recommended
          4 found this review helpful
          Worked great! Amazing how much junk came out of the...
          Worked great! Amazing how much junk came out of the duct.
          by
          • Verified Purchase
          2 found this review helpful
          Works well but the user needs to use common sense. The rods are a balance between rotational sti...
          Works well but the user needs to use common sense. The rods are a balance between rotational stiffness and lateral flexibility. One has to work slowly and carefully depending on the radius and number of bends. A good variable speed drill is a must. Also the amount of debris in the vent will have a great impact on the speed one can progress. The vent I cleaned hadn't been cleaned for 15 years. I twisted a kink in one of the rods when I got too aggressive. I realized that I was pushing more and more debris as I moved forward causing more resistance. I decided that I needed to clear the loosened lint as I moved along so I used a ring clamp to cover the inner vent opening with a thick mil plastic and then cut a cross slit in the middle allowing me to insert my shop vac hose into it with a good seal. I had it in blower configuration and it blew the loosened lint out. I could then go back in with the brush, loosen some more and repeat. It was helpful that I could remove the outer vent flap and work from both directions with the brush. Any tool requires some skill from the user. I recommend it.
          by
            • Recommended
            27 found this review helpful
            Highly recommend
            This product gets the job done with ease! My dryer wasnt drying anymore and I knew it had to be a clogged vent. I kept having to dry the same load multiple times. I waited far too long to get this cleaning kit!! I wish I had purchased sooner. It cleaned my vent and there was soooo much in there I had no idea. Now my dryer is actually drying the first time I start it and quickly!
            by
              • Recommended
              2 found this review helpful
              Highly recommend
              This product gets the job done with ease! My dryer wasnt drying anymore and I knew it had to be a clogged vent. I kept having to dry the same load multiple times. I waited far too long to get this cleaning kit!! I wish I had purchased sooner. It cleaned my vent and there was soooo much in there I had no idea. Now my dryer is actually drying the first time I start it and quickly!
              by
                • Recommended
                1 found this review helpful
                Does a great job. Didn’t bother to attach it to...
                Does a great job. Didn’t bother to attach it to our drill, wasn’t necessary. We have a long distance from the dryer vent to where it discharges outside (approx. 154” total length w/2 curves) so the extra attachments to extend the length were very helpful and necessary.
                by
                • Verified Purchase
                5 found this review helpful
                It worked like a charm. Very easy to use in my drill. It pulled out this much stuff from my vent....
                It worked like a charm. Very easy to use in my drill. It pulled out this much stuff from my vent. The tool was just long enough to reach from the floor to the roof. Great job. Thanks
                by
                • Verified Purchase
                • Recommended
                2 found this review helpful
                It is pretty terrific. I was worried about...
                It is pretty terrific. I was worried about opening one of the joints on my vent with the brush but the brush and rods are very flexible. When I insert the brush in the vent line it stopped so then I started spinning it with my drill and it went around the bend in the vent line. I recovered a lot of lint which is a fire hazard. My dryer vent is over 20 feet long and this product only has 12 feet of rod. I will be going back to the Home Depot to get a second one so that I can finish the job.
                by
                • Verified Purchase
                1 found this review helpful
                Showing 1-10 of 1,082 reviews