Improve heat retention in your home by covering your exhaust fan with this Thermwell Products 8 in. Exhaust Fan Cover. Its 4 powerful built-in magnets help keep the cover in place over a metal exhaust fan.
Helps prevent drafts and heat loss through an outdoor-venting exhaust fan
Durable plastic design with a sleek, clean white finish
10-1/4 in. diameter fits 8 in. exhaust fans
4 built-in magnets hold the cover in place; includes extra adhesive-back magnets for use with non-magnetic fans
Q:Will this work with a bathroom ceiling exhaust fan?
by|Mar 29, 2023
1 Answer
Answer This Question
A:Â It is not designed for this type of fan.
by|Mar 30, 2023
Q:I had white fan cover with the round magnets does this cover comes in 12 1/2 \ 12 1/2
by|Mar 14, 2023
2 Answers
Answer This Question
A:Â So does this fan cover replaced the old one ? Because the one that I had the magnets was round.
by|Mar 23, 2023
A:Â This is the only size we make.
by|Mar 14, 2023
Q:I'm looking for a white exhaust fan cover 9 x 11
by|Oct 16, 2018
5 Answers
Answer This Question
A:Â The cover is the right size for me but the magnets aren't holding the cover very good.
by|Apr 2, 2021
1 found this answer helpful
A:Â If your exhaust fan is the standard size, I recommend this Frost King cover. Fits securely on the fan grid with magnets in each corner. Blocks the breeze and cold air from coming in. One note however: strong incoming wind gusts may blow off the cover. To resolve this, during the cold months, I propped up a wood cutting board against the fan cover. The product meets my expectations.
by|Oct 17, 2018
A:Â This white cover is circular , with 4 magnetic tabs . The circular part of the cover will fit over a fan measuring from 8-9 inches. If you include the tabs .....12 inches. I like the product. However, if a strong wind blows in ,the cover will blow off. I added a few more magnets and it works fine now.
by|Oct 17, 2018
A:Â Don't make one. We have cover that fits 8 inch round.
by|Oct 16, 2018
A:Â Good Luck in finding a 'bright white'... this one is a light 'off-white' neutral cover...I painted mine "Black Stainless Steel" (which you can, also...in white)...
by|Nov 6, 2018
Q:Where can I purchase near Wyandotte, Michigan?
by|Mar 1, 2017
3 Answers
Answer This Question
A:Â Very easy...just go online and select your local H-D Store.
by|Nov 6, 2018
A:Â You will need to order this item from Home Depot .com.
by|May 4, 2023
A:Â this is an inferior product, it was bent , did not stick to the metal fan and lost all of its magnets in a short period of time.
by|Dec 9, 2022
Showing 1-4 of 7
Customer Reviews
2.9 out of 5
(129)
2.9
out of 129 reviews
44% recommend this product
5
30
4
23
3
17
2
14
1
45
Filter by:
Showing 1-10 of 129 reviews
Dec 13, 2019
Not very attractive but it works. Made of a thin plastic material with glued on magnetic strips ...
Not very attractive but it works. Made of a thin plastic material with glued on magnetic strips (4). Comes with extra magnetic strips. I use it to fend off cold air coming in through my range hood vents.
by
Recommended
1 found this review helpful
Nov 6, 2018
It seems to do the job..time will tell...we'll have to see what happens when the winter temperatu...
It seems to do the job..time will tell...we'll have to see what happens when the winter temperatures arrive (below freezing and the gusty winds hammer against the fan housing door. Not the "sturdiest" to say the least, but for price, and the fact that we don't use the fan on a daily basis, it seems to be well worth the small investment. I would recommend that other people that purchase this product be careful when handling (installation & removal). I actually painted it "Black Stainless Steel" to match my new kitchen appliances. Anticipating that over some period of time I feel that it will have to be replaced, I recently ordered another one to have as a spare. If it were of a little heavier construction I would have given it a 5-Star Rating!
NOTE: The Range Hood and Nightlight were also purchased from Home Depot!
by
Verified Purchase
Recommended
May 28, 2017
Years ago they made these with stronger material, but discontinued them for some reason. I had a...
Years ago they made these with stronger material, but discontinued them for some reason. I had a hard time finding any of these so I was grateful to have found them online. I thought they had quit making them entirely so was glad to find out that is not the case. They keep the bugs out in the summer & the cold out in the winter. I place tall (decorative) S&P shakers on each side that cover the bottom magnets to keep the wind from blowing the covers off (I have a shelf right below my fan). It doesn't happen often but my fan is highly exposed to the wind. I LOVE them & always buy extra for my neighbors b/c our apartment complex no longer provides them. I would highly recommend them to anyone.
by
Recommended
1 found this review helpful
Dec 9, 2016
very effective keeping out the cold during winter here in new england. I would highly recommend.
very effective keeping out the cold during winter here in new england. I would highly recommend.
by
Verified Purchase
Recommended
1 found this review helpful
Nov 17, 2016
Product purchased in-store. It is made of a very lightweight plastic. Product seems to prevent dr...
Product purchased in-store. It is made of a very lightweight plastic. Product seems to prevent drafts once you can get the magnets to stay on the cover and the cover to stay on the exhaust fan. I ended up using Gorilla Tape on all four corners to keep the magnets from falling off (yes, two magnets and the cover fell off when apparently an outside draft pushed the cover off the fan) and applying four small earth / super magnets onto the face (all four corners) of the metal exhaust fan to add extra magnetic strength. Once the aforementioned was done, the product has stayed on and does seem to keep most of the draft out (fyi...the product is a tad too big for my 10 1/2" x 10 1/8" exhaust fan and leaves about a 1/8-1/4" inch overhang on all four sides where the draft blows towards the wall instead of face forward) -- see photos. As far as longevity of the product, I can't speak to that since I've only had it installed for a few weeks and have only experienced the above. I rated this product 2 stars due to the modifications and added expense necessary to make the product work. I would only recommend product if the purchaser is willing and prepared to make some slight modifications to product.
by
Recommended
1 found this review helpful
Oct 18, 2023
by
Sep 6, 2023
Covers the fan, but not very attractive.
by
Verified Purchase
Jul 19, 2023
flimsy material compared to previous iterations of the product...
flimsy material compared to previous iterations of the product
by
Verified Purchase
Feb 23, 2023
by
Verified Purchase
Feb 15, 2023
I HAD AN OLDER STYLE COVER WHICH THIS REPLACED. THE...
I HAD AN OLDER STYLE COVER WHICH THIS REPLACED. THE OLDER STYLE WAS MUCH BETTER THAN THE NEW ONE. MAGNETS ARE NOT AS STRONG AND EASILY COME OFF. HAD TO SUPER GLUE THEM IN PLACE.
The EZ-FLO Return Air Grille is designed for wall or ceiling openings to help improve air circulation by extracting air from a room. It is made of heavy-duty steel with a white powder-coated finish that resists flaking and rust for a longer-lasting performance. It fits a rough duct opening 14 inches wide by 6 inches long. It features slotted vanes that are non-adjustable and in a fixed position. Includes (2) screws for easy installation. It is important to check the duct opening size before purchasing a duct or vent cover.
Designed for floor openings, this Steel Floor Register allows you to control the airflow into a room for increased comfort. The smooth glide technology and rattle-free design ensures quiet airflow from your central air system. This floor register delivers optimal airflow in air-conditioning and heating applications. The design is sized to fit mobile homes and RVs. Made from high quality, this floor register was built to last to endure the rigors of everyday use.
Designed for floor openings, this Steel Floor Register allows you to control the airflow into a room for increased comfort. The smooth glide technology and rattle-free design ensures quiet airflow from your central air system. This floor register delivers optimal airflow in air-conditioning and heating applications. The design is sized to fit mobile homes and RVs. Made from high quality, this floor register was built to last to endure the rigors of everyday use.
10 in. x 6 in. fixed curve blade, 1 way air supply register is designed for square duct opening of 10 in. (W) by 10 in. (H). Curve Blade registers look elegant and can handle relatively higher air flow. Easy to repaint of needed.