1.9 cu. ft. Over-the-Range Microwave in Stainless Steel with Sensor Cooking

Yes, model JVM7195SKSS would be a good replacement. Both models have the same 30-inch cutout width and 13-inch cutout depth. The JVM7195SKSS is also slightly taller and has a larger capacity. We recommend reviewing the Installation Instructions to make sure the existing installation and venting setup are compatible.

Microwaves are not tested for sound level. When in use, you can expect normal heating and fan noises that will not interrupt kitchen conversations.

The interior of this microwave is solid grey.

Whether a microwave will fit in a specific area depends on whether the dimensions provided refer to the cabinet opening, available countertop space, or a built-in installation cutout. All GE over-the-range microwaves are designed to be installed in a 30-inch-wide cabinet opening, so we do not offer an over-the-range model that will fit a 22" × 16" space. We also do not offer a built-in microwave designed for an opening of this size. If you are looking for a countertop model, we do offer two stainless steel options that are smaller in size. Model GCHK07N1WSS measures 10.125" H × 17.25" W × 13" D. However, this model is designed for countertop use only and does not have a compatible built-in trim kit. We also offer model GCST09U1WSS, which measures 11.5" H × 19" W × 14.5" D. This model does have an optional built-in trim kit available; however, the kit is only offered in 27-inch and 30-inch widths. We do not recommend installing either of these models in a tight or enclosed space, such as inside a cabinet, unless proper ventilation requirements are met. For proper airflow, allow at least 3 inches of clearance on both sides and above the microwave and at least 1 inch of clearance at the rear. Additionally, the front edge of the microwave door should be positioned at least 3 inches back from the edge of the countertop or shelf to help prevent accidental tipping. You can view model GCHK07N1WSS here: https://www.homedepot.com/p/GE-0-7-cu-ft-700-Watt-Spacemaker-Countertop-Microwave-in-Stainless-Steel-GCHK07N1WSS/331555499. You can view model GCST09U1WSS here: https://www.homedepot.com/p/GE-0-9-cu-ft-900-Watt-Countertop-Microwave-in-Stainless-Steel-GCST09U1WSS/331555622.

Yes, this model will fit in the same space as your current model. You can find full dimensions for this appliance on the Specification page, found here: https://images.thdstatic.com/catalog/pdfImages/c0/c0de5d47-b911-4424-9a98-0a30680beaf0.pdf. When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used.

The model number provided, JNM71965K2SS, is not showing as a valid model number. We suggest calling 1-800-626-2005 with the correct model number information. You can also reach out to us through our social media pages on Facebook, X, or Instagram for assistance.

This over-the-range microwave comes externally vented from the factory. However, if you wish to convert the venting to be recirculating, you can do so and the filter is already included. For information on how to convert the venting on this microwave, please see page 12 of the installation instructions in the following link: https://images.thdstatic.com/catalog/pdfImages/22/229e4bc9-8cf2-4c68-bcf8-98de9f138daf.pdf

Any of our 30" over-the-range microwave models will work as a replacement for this 30" over-the-range Advantium. When replacing an over-the-range microwave or Advantium, the mounting bracket is specific to each model so the new bracket must be used. The new screws, bolts, and exhaust adapter are also to be used. Please see the installation instructions in the following link: https://images.thdstatic.com/catalog/pdfImages/06/06b8997c-4c4f-4f49-8353-3d605eafe139.pdf .