A: The Gator Grip universal socket fits up to 3/4 inch or 19mm nut or bolt head.
A: It will depend on the size of the Penta bolt. For a street shut-off our 1/2" drive "King Gator" grip socket which fits 7/16" to 1-1/4" might fit. The space inside the shut-off box will also have to be taken into account.
A: I don't think so. The device is not a deep socket. The pins only retreat about 1/2".
A: I think it is doubtful, but maybe. The Gator Grip socket is 1 inch outside diameter so the first question is will it fit into the space where the spark plug broke? If it will fit is there a non-round top area of the spark plug that it can grab? I think you would be better using a 5/8th deep socket. David
A: No it's not deep enough for spark plugs.
A: It might be, but I wouldn't ... ... only rated to 450 ft.lbs. torque, break-away torque can be higher. I used 1/2" or 3/4" drive impact sockets to change my tires. It might break or wear-out fast if used for changing a car tire. ... outer dimension is too large to fit into openings at lug nuts in wheel covers on some vehicles
A: I have only used it to raise and lower the support jacks on my RV - those are not real tight - as tight as tire lugs have to be I doubt this socket would work well
A: In most cases no. There may be a few old cars with shallow lug nuts that it might fit but for most cars the answer is no.
|Name||3/8 in. Universal Socket with Power Drill Adapter||3/8 in. Drive x 11/16 in. Universal Joint Socket||3/8 in. Drive x 17 mm Universal Joint Socket||3/8 in. Drive x 16 mm Universal Joint Socket|
|Socket Size||3/4 in||11/16 in||17 mm||16 mm|
|Drive Size||3/8 in||3/8 in||3/8 in||3/8 in|
|Socket Depth||Low Profile||Intermediate||Intermediate||Intermediate|
|Number of Pieces||1||1||1||1|
|View Product||View Product||View Product||View Product|