#1 Home Improvement Retailer

Internet # 206767716

Model # 20135-03202-42

42 in. L x 1 1/4 in. ADA Compliant Grab Bar in Brushed Stainless Steel

$26.99
Limit 50 per order
$44.98
Save $17.99 (40%)
Apply Now
Pay $1.99 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Exceeds ADA Standards, ANSI A117.1 compliant & supports 500lbs
  • Concealed screw design for a more decorative look
  • Backed by Glacier Bay Limited Lifetime Warranty
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

This Glacier Bay Concealed Screw Grab Bar is designed to support up to 500 lbs. when installed properly. Perfect for installation near a toilet, tub or shower for added safety in your bathroom. Pair with other Glacier Bay pieces.

Highlights

Product Information

Internet # 206767716

Model # 20135-03202-42

Specifications

Questions & Answers

99Questions
caret
Q:Standard construction uses 16" centers for studs. Why do they not make these grab bars in multiples of 16 inches to match the spacing of the studs so they can be mounted securely?
by|Apr 8, 2024
1 Answer
Answer This Question

A:  The 18” bar is for a vertical mount in a commercial setting. It is a requirement.

by|Apr 10, 2024
    caret
    Q:How many Wing-it’s do I need per grab bar?
    by|Apr 5, 2024
    1 Answer
    Answer This Question

    A:  Thank you. You will need two. The WingIts are sold in sets of two so you will need one pack for each grab bar.

    by|Apr 8, 2024
      caret
      Q:What is the standard or recommended height from the floor that a grab bar should be installed? (not a shower install)
      by|Mar 15, 2024
      1 Answer
      Answer This Question

      A:  Thank you. According to the ADA, the correct height is 33 to 36 inches from the finished floor.

      by|May 18, 2024
        1 found this answer helpful
        caret
        Q:Is it critical to hit studs when installing the screws through the tile? I’m not sure a stud finder can locate them through tile.
        by|Mar 7, 2024
        1 Answer
        Answer This Question

        A:  Thank you. It is critical you either hit a stud or use the WingIts Stud-Less installation Kit. Internet # 202552917 Model # RC-RESGBW35-2 Store SKU # 1005557118 Store SO SKU # 1000762707

        by|Apr 20, 2024
          2 found this answer helpful
          Showing 1-4 of 99

          Customer Reviews

          4.8 out of 5

          • 4.8 out of 2,133 reviews
          • 97% recommend this product
          Filter by:
          Showing 1-10 of 2,133 reviews
          Functional ADA compliant institutional-style grab bar
          • This is a review of the 24-inch model. (18, 35 and 42-inch models are also available.) The 24-inch measurement is the center-to-center distance between the 3-inch diameter mounting plates. Eight SS screws are provided for mounting the bar. For vertical mounting, there are enough holes to install two screws in each plate. Unless there are preinstalled backer boards under the drywall, mounting will be problematic. At best, only one stud will be usable. There are specially designed wall inserts that are designed to distribute the force that will be placed on the bar. The instructions only address installing the screws in wood. • The SS bar/tube diameter is a comfortable 1.25-inches with a brushed finish. Polished finishes are available. The escutcheon plates securely snap over the mounting plates to conceal the mounting plate and screws. The escutcheon plates must be properly aligned with dimples in the mounting plates before snapping them on. Once on, they are a challenge to remove. • The product comes with a limited lifetime warranty in residential applications. Business, industrial and commercial installations are limited to one-year. The grab bar is made in China.
          by
          • Recommended
          A nice safety bar that met our needs.
          BACKGROUND: My mother is 88 and has trouble getting in and out of the bathtub. We ordered the Glacier Bay Grab Bar to make it safer and easier for her. FIT AND FINISH: The bar appears well constructed and contained all the basic hardware for installation. FEATURES: From the Home Depot Product page with my comments as appropriate. • Brushed stainless-steel finish. o I always like the look of stainless steel. • Designed to support up to 500 lbs. when installed properly. o More than enough support for my 150lb mother. • Perfect for installation near a toilet, tub or shower for added safety in your bathroom. • Concealed screw design for a more decorative look. o Gave a clean look compared to exposed mount designs. • Backed by Glacier Bay Limited Lifetime Warranty • Full product length 27.06 in. bar length 24 in. • WingIts compatible flange for stud-less installation; WingIts sold separately (SKU 147-567) o I used molly bolts because there were no studs at the mounting location. • Mounting hardware included • Easy to install/ o Once I was tooled up it took less than 10 minutes. • Exceeds ADA Standards & ANSI A117.1 compliant. INSTALLATION: I determined the mounting location. Drilled pilot holes for the molly bolts. Tightened them in and installed the mounting screws. The cover rings snapped on and I was done. SUMMARY: Easy to install, sturdy, perfect for our needs. PROS: Sleek look. Functional. CONS: PHOTO CAPTIONS: 1. Everything needed is included. 2. Installation location (before.) 3. Attaching to shower enclosure. 4. Captive trim rings to hide mounting plates and screws. 5. Completed installation. 6. Top of bar after installation.
          by
          • Recommended
          ADA Grab Bar
          The Glacier Bay grab bar is a good safety device. This one is 24 inches long and is 1 1/4 inches in diameter. It seems to be very strong and is made with stainless steel. It is rated to handle up to 600 lbs. I use this bar to pull myself up to get into a ships chair and to hold on during rough seas. It is rugged. Installation is simple and easy with the provided screws. Also, trim rings cover the installation screws.
          by
          • Recommended
          Does the job and is a good value choice in nice stainless steel
          Does the job and is a good value choice in nice stainless steel. It looks good and the stainless won't rust. This bar gets the job done, especially if you can locate it on a stud. The "18" length makes it sound like it won't hit studs on 16, but you can make it work since the flanges are bigger. I didn't use wing-its, I hit a stud in a vertical installation. It comes with 6 nice 2" stainless steel #10 screws. No rust will come from these. Why not 5 stars? Because the little dent on the flange can be a pain. It doesn't look great, and it can be a bit clumsy to engage or disengage.
          by
          • Recommended
          Handy grab bar
          Always needed in our large shower. Have it installed before you really need it. Not just for ADA. Easy to install after you use a stud finder to see where the studs run. This is the best place to install to be able to hold the weight of someone needing a helping hand. After installing, just slip the cover rings over the attachment points and you are done. Nice brushed stainless steel will look great and not rust or color if you wipe it down after every shower.
          by
          • Recommended
          Nice looking, simple grab bar
          This is a nice looking 24 inch grab bar. The width is very comfortable. It is smooth, my other one has some texture, which I prefer, but even wet it didn't feel slippery. I placed it on the edge for getting in and out of the tub. Installation requires screwing the flange ends in to a stud. They provide the screws. After locating the stud and marking the flange holes, I used a ceramic drill bit for the tile and then a wood drill bit. It feels really secure. The hardest part was removing and replacing the flange covers. I had to use a rubber mallet for both removal and final install. Was careful during the install to not crack the tiles. Once properly installed the covers stay put.
          by
          • Recommended
          1 found this review helpful
          Grab on
          Glacier Bay grab bar was chosen to add to the shower for a feeling of more stability. Installation required drilling four holes which I lucked out and aligned with grout lines rather than having to drill through tile. At two feet long and at a height of three feet it works just fine for us. As we aged a need for grab bars seemed more important and Glacier Bay has a nice assortment from which to choose.
          by
          • Recommended
          5 found this review helpful
          Strong, solid, well-made, awesome, awesome addition to any home--there when you need it!
          These grab bars are OUTSTANDING!  Installed properly, they are SOLID AS A ROCK, provide support, stability to someone that may be unsteady, unstable on their feet, or just needs some added support, especially when going up steps.   I have one step in my garage, which I have already learned CAN BE a problem for someone unsteady on their feet.  This grab bar will quickly, easily, inexpensively SOLVE that problem, add safety, stability where it is needed.  I am not elderly, but I still have several grab bars in my home, primarily for when elderly visit, but not limited to elderly.  Joint surgery is fairly common, other surgeries or injuries may also make us vulnerable to falls.  It is GREAT when you have a SOLID support bar like this one there to grab onto, as needed.   I want to PREVENT falls, keep my home safe for anyone that may be physically impaired, that enters my home.  I have seen these grab bars make a TREMENDOUS DIFFERENCE; they are EXACTLY what is needed to offer support, stability where it is lacking.  Some individuals may suffer from vertigo (dizziness); here too, these grab bars are invaluable.  For a small cost, they deliver LOADS OF BENEFITS, tons of protection from falls, for being EXACTLY what you need, when you need it.   This grab bar is SOLID AS A ROCK, very strong, high quality, well-made, will be an OUTSTANDING ADDITION to my home.  I LOVE IT!  Mostly, I love knowing that it will be there, when needed, to serve not only myself and my family, but also visitors to my home, which includes elderly.  It hangs on the wall, so you forget that it is even there, but when needed, it seems priceless, exactly WHAT YOU NEED, when you need it.  Its design is ideal, has no sharp edges. These are FANTASTIC, I cannot say enough about them.  I also like the price.  Doesn't cost you an arm & a leg to make an improvement to your home that will make your home safer for ANYONE at any age that might be or become physically challenged.  As we live longer, the need for these devices grows...  the good news is that they can make ALL THE DIFFERENCE!   I highly, highly, highly recommend this grab bar.  I LOVE IT, and I think that you will too!
          by
          • Recommended
          Attractive, useful accessory
          We wanted a grab bar for our bathtub/shower. I chose the Glacier Bay 24 in model. Our surround is thin fiberglass and I knew I needed to mount to studs. In order to hit studs a 24 in bar must be mounted at a 45 degree angle. I like the welded mounting rings on this model. They are sturdy and will hold up to a "grab" if needed. The mount ring covers fit tight and look good. The brushed nickel finish matches our shower head and tub spigot. I used the included stainless mounting screws. My only concern is lack of checkering on the bar itself.
          by
          • Recommended
          We added a little caulking to play it safe. Also used the winglets that you buy separately… This gives me peace of mind for when my 80yr old mom is holding on. So far so good! It’s a nice looking bar and holding firm.
          by
          • Verified Purchase
          Showing 1-10 of 2,133 reviews

          Get 10% off your purchase

          Sign up for emails & save 10% on select home decor. Valid on select items.