A: No. The 10800 is not compatible with Little Giant (or similar style) ladders. For more information, please contact Guardian customer service at firstname.lastname@example.org. Thank you.
A: Thank you for your question regarding the 10800 Safe-T Ladder Extension. Unfortunately, due to the variability in ladder dimensions (beyond the rail dimensions of .5” - 1.5” x 3” - 3.75” with bottom of the top rung no more than 9.5" from the end) and configurations such as flares, bracing, or other ladder features, we are unable to recommend specific ladder manufacturers or models. We recommend contacting the ladder manufacturer directly as they may be able to provide more specific dimensions for you to determine proper fit. Should you have further questions, please contact us at email@example.com. Thank you.
A: Hello, The 10800 will fit ladders with side rails that are .5" to 1.5" in width, 3" to 3.75" in depth, and where the bottom of the top rung is no more than 9.5" from the top of the ladder. The 10800 will slide over the ends of the side rails and a spring-loaded lever will lock underneath of the top rung. Thank you.
A: The Safe-T Extension installs by sliding over each ladder side-rail (refer to the product instructions for full detail), so if the stabilizer bar in question requires installation in the same location they would not be able to be used simultaneously. If however the stabilizer bar is able to safely be installed below the Safe-T Extension then such use would be acceptable.