RL 5 in. and 6 in. White Bluetooth Smart Integrated LED Recessed Ceiling Light, Tunable CCT (2700k-5000K)

When remodeling my home and adding an addition I opted to go with recessed lighting in the ceilings. I wanted LED lights that I could control via WiFi and from Alexa and Google Home, but also be able to change the color temperature when I wanted to (never know when you want to change the color on the walls!). These lights were exactly what I needed. I first did my back patio, paired together with the Halo bluetooth wall light switch (HIWAC1BLE40AWH) that controls them. Setting them up in the Halo app on my iPhone was super easy and you can easily group the lights together to the switch. To control them over WiFi you need the small Halo bluetooth-to-wifi internet bridge that plugs into an outlet. With this setup the wall switch turns all of the lights on and off (and has a dimmer), then with the app or Alexa/Google I can turn individual lights on or off and control brightness of any or all of the lights. From the app I can also control the color temperature from 2700k to 5000k, and even make each of them different colors (not that I would, but I could!). After this I installed the same lights with Halo light switches in my living room, family room, office, and three bedrooms. I’ll also be installing them in two additional bedrooms once I get the retrofit cans installed in them. And speaking of cans, three of the rooms and the patio used Halo new construction cans, while the rest of the house were Halo retrofit versions (like the H27RICAT). Everything fit perfectly with no issues. In each of these rooms it’s great to be able to say “Alexa, living room lights 50 percent” or “Hey Google, turn on family room light #4”. You can name them anything you want, like my son who wanted his room to be “bodayshus”. I’ve had them installed now for over a year and they have been working great. The only problem I had was a couple of times the switch acted like it lost connection with the lights in one of the room, but cycling the breaker fixed this. Also one time the Halo server was down so the connection between the internet bridge and Halo caused Alexa and Google Home to not work in controlling them, but that problem went away once the server was back up. Overall I am extremely happy with these lights, the app, and the full control we have over the lights! Would highly recommend them together with the wall switch and bridge.

What a nightmare! I got the Halo recessed lights because they are supposed to turn on and off with my voice with a bridge. The app for the lights is a pain in the neck. And I don't really like the color of any of the options that the light gives off. So there's that. But on top of it all I buy the bridge and install it except I can't finish installing it because there's nowhere to put your password!! The app blocks the space where the password is to go and you cannot get to it. No matter how hard you try. It won't scroll. And try to get help from Cooper lighting? It's laughable. The only way to contact them is through email and then you have to wait to see if maybe they might respond. If I could I would rip every one of these lights out of my house and take them back. But I spent a lot of money having a contractor rip out my ceiling so I can put these lights in. So I'm not about to spend more money to have them rip them out and then put new ones back in. THESE SHOULD WORK PROPERLY! If anything Cooper lighting should pay ME For the complete waste of time and money! I am so mad!

I have replaced nearly all of the lights in my home with Halo Home recessed lights (and plan to replace the remaining lights soon). The replaced lighting was a range of "dumb" incandescent and halogen lights to smart(ish) LED's. My largest complaint with the so-called-smart LED's and switches that I replaced was that they required an internet connected hub and they had slow response that would often reach into the tens of seconds. I had researched using several other brands of smart LEDs, but could find nothing that met my requirements of no hub, an in-wall dimmer option to retrofit my existing switches and both color and dimming control. The Halo Home lighting solution with its Bluetooth based mesh network was just what I was looking for. I love that I have so many options to control the lighting including the "Halo Home Anyplace Dimmer" that I have used to add an extra set of dimmers for both my wife and I on either side of our bed. I am also impressed by the extremely fast response from any of these available control options. They respond nearly instantly. Customer customer service is top notch! I had several questions and found a few minor issues that I came across after installing the lights. I contacted Cooper customer service and relayed these problems and questions and was impressed with the effort put into the reply. They clearly took my reports seriously and I was assured that the problems I reported were going to be resolved in the next release of the software. My questions were answered quickly and thoroughly. I am in the process of using their IFTTT integration (https://ifttt.com/halohome) to tie my lighting to my Ecobee room occupancy sensors and perform more complicated home automation tasks that are not directly available in the Halo Home Android app. So far so good. I have only two complaints. The first is that at this time, the Android app has a few features that need improvement. As mentioned about, I have been assured by customer service that these are being looked into and will be resolved soon. The second complaint is that Eaton/Cooper has not published a programming interface to let us more technical users. This is somewhat mitigated by the IFTTT integration, but it would be nice to have more direct control.

First step is to buy the HALO devices/lights and install them in your home. Next get the dimmer switch and mount practically any place in your home. The package comes with 3M tape to mount securely on your wall. Super easy install. Once the lights are installed and the switch is in place, download the App for your SmartPhone and set everything up. Once the app has detected your lights, you can easily add the switch to control the lights. You do need lights before the App will connect to the switch, just an FYI.

This white bluetooth dimmer switch is really cool. It's stylish and sleek looking. The switch operates and installs easily. It even comes with the 3 batteries. (see photograph uploaded) The unit can be held directly in your hand, it does not need to be installed on a wall. The Halo system is required though, so you can't just get it on it's own. It doesn't require internet either.

This Bluetooth Dimmer works with the Halo Home product line. It is the thickness of a smart phone and the size of a wall plate (it comes with tape and/or screws to wall mount, if desired). It is powered by three CR2032 coin batteries (also included). You can pair it with one device or a group/entire room. It uses 2.4Ghz 4.0 Bluetooth, with a range up to 100', to the closest device. It has to be paired with the free Halo Home app, but no WiFi service is required. On the positive side ... it is light weight and very responsive. Touch the slider, and the light turns On, at the dimmer level corresponding to where you touched (i.e. touch at top, 100% ... touch in middle, 50% ... touch bottom, Off). The response is immediate; no delay typical of WiFi based lighting. Also, no need to carry a smart phone everywhere and log into app to get a light turned On, and guests do not need to download an app to use lights (also, the app tends to freeze). Works with their newest Bluetooth Mesh (i.e. communicate with each other, not just the base [longer range and better stability]) devices. On the negative ... it was difficult to set up. The clips that hold the batteries have a Negative symbol on them (see pic). Typically that means negative side towards, but actually Positive is up (I see this being a problem when replacing the batteries). Also, the Wake button did not work. I had to call Customer Service to get it reset (to reset: 'quickly' tap the wake button 4 times). Also, not sure why it is 4.0 (2010), and not 5.0 (2016); which is in the newest smart phones? Bottom line ... it is a great option for someone wanting to add a Dimmer Switch to a room/home without a router (e.g. an attic with only a pull chain light, an out-building, a vacation home). Much easier than running new wiring for a switch. Also, great for smart lighting in rooms where you do not want Alexa listening in.

My wife selected this product for me to test to see if we might be able to integrate it into the smart home automation we currently use in our home. When I initially looked at it, it appeared we would be able to use it to pretty good effectiveness in our basement where we have half pull chain lights and half wall light switch lights. When I received the product, I looked at all the parts and they were pretty straight forward and the instructions were easy enough to follow. The only issue for us is that you have to purchase light fixtures specifically from this brand to use with this switch. And the light fixtures are quite costly which put my idea of smart basement lighting outside the range of our budget quite rapidly. Now if I was upper middle class income, I might be able to justify the expenditure and then these lights and the single dimmer switch would make for a very elegant setup.

I like how I can program each light to a certain specification and area

everything worked well except the retaining springs - the compression is too light. These retrofit quickly otherwise. The smart app allows many features to customize