For convenience and creativity, Handprint's particleboard is as versatile as it is easy to work and ready to customize. Featuring clean, smooth faces and edges, this project component is perfect for a wide variety of home DIY and decor projects. Loved by makers and DIYers alike, we take the hard work out of home projects - but leave all the satisfaction in.
Actual dimensions: 0.60" x 23.75" x 47.75" Tolerance: +/- 1/4
Weight: Approx. 22.6 lbs
Mixed species; CARB Phase 2 compliant
Smooth, unfinished front and back; edges have even cuts; square-cut corners, perpendicular to edges
Free of visible defects such as large chips, splits, scratches, and fiber tear-outs
Recommended for indoor use; if using outside, seal with a weather-protectant finish and place in a covered or protected area
Ready to customize with the finishes of your choice, including paint vinyl decals, and sealant; stain is not recommended
A:Â Peace, we have reached out to our product development team regarding this question. Once we hear back, we will update this response.
by|Nov 22, 2023
Q:Can this board be painted?
by|Oct 15, 2023
1 Answer
Answer This Question
A:Â Nat1, certainly, this project panel can be customized with a paint job to suit your specific project requirements.
by|Oct 16, 2023
Q:Can this product, 5/8 in. x 2 ft. x 4 ft. Particleboard Project Panel
by Handprint, be used underlayment for carpet? I have an old house of which some of the underlayment was water damaged and need to replace with similar material?
by|Sep 24, 2023
1 Answer
Answer This Question
A: SteveHconyersGA, yes, these smaller panels are great for a variety of build, repair, and create projects. These panels are easier to transport and handle than a 4 x 8 sheet and generate less waste. When choosing plywood, underlayment, or OSB for flooring, consider the size of your project. If it’s important to have as few joints as possible, choose 4’x8’ sheets instead. Please check local building codes in your area to make sure that this adequate for use in your area.
by|Sep 25, 2023
Q:Could this be used for closet shelving?
by|May 31, 2023
2 Answers
Answer This Question
A:Â I use as shelving on metal frame in garage, for a closet I would make sure it is properly supported to hold weight
by|Sep 6, 2023
A:Â Hannah, Yes, this is an appropriate use when installed with adequate support, especially anything heavier than 30 lbs. right in the middle. For evenly distributed light-to moderate-weight household items, it will work well.
by|Jun 1, 2023
Showing 1-4 of 13
Customer Reviews
4.7 out of 5
(352)
4.7
out of 352 reviews
94% recommend this product
5
259
4
75
3
7
2
3
1
8
Filter by:
Showing 1-10 of 352 reviews
Sep 2, 2022
Got a New kitty
Just what I needed for a quick project
by
Response from UFPI RepresentativeSep 6, 2022
JayDaddy, thank you so much for taking the time to leave an excellent review. Handprint really appreciates your business. If there is anything else we can do for you, please e-mail our customer service department at ufpretailcs@ufpi.com.
Verified Purchase
Recommended
Apr 1, 2022
DjfaceACSLtd here is a picture of what made with the...
DjfaceACSLtd here is a picture of what made with the particle board
by
Verified Purchase
Feb 20, 2021
Good quality for the price
Used it to make a tv stand. Pretty easy to use and sturdy. Only this is, if you decide to cut it . Do it yourself , HD hacked it . Cuts were pretty uneven
by
Recommended
1 found this review helpful
Nov 8, 2023
by
Nov 1, 2023
The board I purchased worked out perfectly
by
Response from UFPI RepresentativeNov 2, 2023
Dear HomeDepotCustomer, thank you so much for your wonderful review. Handprint really appreciates your business and we’re glad that you enjoy this product! If there’s anything else that we can do, please e-mail our customer service department at Help@HandprintMade.com, and one of our representatives will be happy to assist you. – Your Handprint Team
Oct 26, 2023
Needed for a school project. Size was too large and an extremely nice employee cut into 3 pieces. Was perfect for lesson!!!!
by
Response from UFPI RepresentativeOct 26, 2023
Dear CjGoldberg, thank you so much for your wonderful review. Handprint really appreciates your business and we’re glad that you enjoy this project panel! If there’s anything else that we can do, please e-mail our customer service department at Help@HandprintMade.com, and one of our representatives will be happy to assist you. – Your Handprint Team
Oct 25, 2023
I cut and used for shelves in the closet. Working well and easy to cut with circular saw.
by
Response from UFPI RepresentativeOct 25, 2023
Dear HomeDepotcustomer, thank you so much for your wonderful review. Handprint really appreciates your business and we’re glad that this project panel worked for your closet shelves! If there’s anything else that we can do, please e-mail our customer service department at Help@HandprintMade.com, and one of our representatives will be happy to assist you. – Your Handprint Team
Oct 18, 2023
It’s a small piece and it’s okay so far
by
Response from UFPI RepresentativeOct 20, 2023
Dear HomeDepotCustomer, thank you for sharing your wonderful review. We truly value your support and are delighted that you are enjoying our product. If there is anything else we can assist you with, please don't hesitate to reach out to our customer service department at Help@HandprintMade.com. Our dedicated team members will be more than happy to help. - The Handprint Team
Cut for convenience and creativity, Handprint's softwood plywood is as versatile and good-looking as it is affordable. Featuring a clean, sanded front and a touch-sanded back, this handy panel is perfect for a wide variety of home decor and craft projects. Whether left natural or finished, its smooth surface is ideal for creating a custom look. Cut, drill, route, glue, fasten, and finish with ordinary woodworking tools and less waste. Loved by makers and DIYers alike, we take the hard work out of home projects - but leave all the satisfaction in.
Unleash your inner craftsman and build beautiful hardwood-faced creations with this PureBond Red Oak Plywood Project Panel from Columbia Forest Products. Harvested in a sustainable manner from a domestic forest, the red oak timber used for the decorative veneers is rotary-cut to exacting standards for an exquisite hardwood appearance that works splendidly on any furniture or cabinetry piece. This 3/4 in. x 2 ft. x 4 ft. panel is comprised of 100% natural wood and assembled with a soy-based, formaldehyde-free PureBond technology that wont subject interior environs to any toxic off-gassing, as UF-constructed panels are susceptible to do. The yellow poplar core substrate is layered in alternating cross bands with the red oak veneers, augmenting the rigidity, strength and flatness you expect from hardwood for lasting durability and enduring beauty. This 7-ply decorative plywood is a cost-competitive alternative to formaldehyde-laden panels and won't degrade the air quality of your home or business over time.
Made of 100% wood, the 1/4 in. x 24 in. x 4 ft. MDF Particle Board is a great choice for a in a variety of applications. The board can be finished by painting and staining. The product is oversized, since it is cut from a piece that is 49 in v 97 in. It is cut for convenience and creativity. The size is loved by makers and DIYers alike.
Handprint's plywood underlayment with hardwood veneers is as versatile as it is affordable. Featuring a clean, sanded front and back, this handy panel is perfect for a wide variety of home DIY and decor projects, including small flooring, wall and roof repairs. Whether left natural for utility projects or finished for decor, its smooth surface is ideal for creating a custom look. Cut, drill, route, glue, fasten, and finish with ordinary woodworking tools and less waste. Loved by makers and DIYers alike, we take the hard work out of home projects - but leave all the satisfaction in.