Exclusive

Return this item within 90 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Henry 887 Tropi-Cool 100% Silicone Gray Roof Coating is a premium, 100% silicone, moisture-cure coating designed to reflect the sun's heat and UV rays as well as protect many types of roofs. While suitable for use in all climates, the 100% silicone chemistry is especially suited for extreme tropical environments, which are exposed to some of the hottest and wettest weather with intense UV exposure. It is specially designed to maintain maximum reflectivity of heat and UV rays as it ages. Its moisture-cure chemistry creates a very aggressive chemical bond with the roof, which allows for permanent ponding water resistance, extreme durability, and superior capabilities of sealing and protection.
Coverage Area (sq. ft.) | 318.25 sq ft |
|---|---|
Product Width (in.) | 12 in |
Application Method | Brush On, Roll On, Spray On |
|---|---|
Approximate Coverage Per Gallon (sq. ft) | 67 |
Coating Base | Silicone |
Cold Applied | Cold Applied |
Color Family | Silver |
Features | Algae Resistant, Extreme Heat, High Impact/Hail Resistant, High Wind Resistant, Ice and Water Shield, Impact Resistant, Mildew Resistant, Quick Dry, Waterproof |
Fire Rating (UL 790) | No Rating Available |
Number per Package | 1 |
Package Size (gallons) | 4.75 gal |
Returnable | 90-Day |
Roofing Product Type | Reflective Roof Coating |
Surface Recommended | Coated Roofs, Concrete Roofs, Concrete/Masonry, Metal, Metal Roofs, Mobile Home Roof, PVC Membrane, Rubberrized-Asphalt, Rubberrized-Mastic, Rv Roof, TPO Membrane, Trailer Roof |
Manufacturer Warranty | Lifetime limited warranty |
|---|
Mike, clean-up of tools and spray equipment containing uncured material may be accomplished by cleaning or flushing with VM&P Naphtha or mineral spirits. VM&P Naphtha has a higher solvency than mineral spirits.
FrankO, in almost all case no primer is needed for an application to a metal roof. However, prior to the application of Henry 887, best practices suggest that you should do an adhesion test to see how well the product sticks to the roof. The application of Henry 887 only requires a single coat, but you can add multiple coats if you want to. Complete multiple coats within 48 hours of each other. Otherwise, you will need to clean the roof again.
Brown, this will depend on the weather. Warmer climates will dry quicker than cooler climates. On a day with the sun out and warm it may be 4-8 hours. It is rain-safe in 15 minutes. Thank you for trusting in Henry and Home Depot.
Carl, Henry 887 TropiCool 100% Silicone is not designed to be applied to shingles of any kind. Henry 817 should only be applied to flat and low-slope roofs.
No, this product is not formulated for use on asphalt shingles.
We are a little unclear as to what the failure was. Henry 887 100% Silicone is a roof coating and not a leak stopper. All leaks like cracks, splits, holes and seams should be repaired with Henry 884 or 885 100% Silicone Roof Sealant prior to coating the roof. We urge you to reach out to us directly at productsupport@henry.com so that we can discuss your issue in greater detail.
jooo, Henry 887 TropiCool 100% silicone can be applied to an SPF roof (spray polyurethane foam roof). Just make sure that you clean the roof thoroughly with a water hose that has a fairly strong spray nozzle and let dry. As a preventative measure, seal all roof penetrations, curbs, flashings, areas where dissimilar materials intersect and any other areas that could leak with Henry 884 TropiCool 100% Silicone Roof Sealant or Henry 885 TropiCool 100% Silicone Seam and Repair Sealant prior to coating the roof.
Mark, Henry 887 TropiCool 100% Silicone can be used to coat over an aged TPO membrane. That means that it has had the chance to be in the weather for 7 to 10 years. You will need to make sure the roof is clean and dry prior to coating it.
Viewing 1-8 of 2423
4.7 out of 5