$8400
- Corrosive resistant construction for durability
- Designed to remove heat and moisture
- Features 3 speed switch
- See More Details
Product Overview
Hessaire shutter exhaust fans are built to industrial application standards with corrosion resistant extruded aluminum frames which will not rust on any mounted surface even when exposed to the harshest elements. Hessaire shutter exhaust fans are ideal for exhausting heat, fumes, and odor in residential, commercial, industrial and agricultural buildings. Hessaire offers shutter mounted exhaust fans from 8" to 36" to fit any size opening. 1.5" wide flanges on the shutters make the unit easy to install. Louvers are constructed with light aircraft grade aluminum alloy for minimal air resistance. Prop is constructed with 5052 aluminum alloy engineered to precise geometry for quietness and air-moving efficiency (except for 30" and 36" - grade G90 galvanized for maximum rust protection). The felt lined edge on louvers provides quiet closing and superior weather seal. 9ft corded plug is included for easy connection. Hessaire achieves the best in class efficiency measured in CFM/Watt. Hessaire is a trusted name in air-movement engineering.
- Best in class efficiency measured by CFM/Watt (cubic feet/minute/Watt)
- 5052 light aircraft grade aluminum alloy louvers for least air resistance
- Non-rusting extruded aluminum shutter frame
- Shutters automatically open and close
- Corrosion resistant, baked powder painted guards tested to 500 hour salt spray
- Hi-efficiency 100% copper wound motors with permanently-lubricated ball bearings
- Totally enclosed, air over motors, IP155 rated
- Fully assembled, easy to mount pre-drilled flange patterns
- UL 705 safety certified
- California residents
1100 CFM Shutter Exhaust Fan Wall Mounted
Compare Similar Gable Mount Attic Fan
 | Top Rated |  |  | |
| Brand | iLIVING | Hessaire | iLIVING | iLIVING |
| Name | 242 CFM Silver Electric Powered Gable Mount Shutter Fan/Vent | 1100 CFM Shutter Exhaust Fan Wall Mounted | 12 in. Shutter Exhaust Fan with Thermospeed Controller, 65-Watt, 960 CFM | 1736 CFM Silver Electric Powered Gable Mount Shutter Fan/Vent |
| Price | $6875 | $8400 | $9000 | $13069 |
| Ratings | (15) | (334) | (51) | (441) |
| Features | Automatic Shutter,Corrosion Resistant,Weather Resistant | Corrosion Resistant,UV Resistant,Weather Resistant | Automatic Shutter,Corrosion Resistant,Speed Control,Thermostat Controlled,Weather Resistant | Automatic Shutter,Corrosion Resistant,Weather Resistant |
| Power Type | Electric Powered | Electric Powered | Electric Powered | Electric Powered |
| Net-Free Area (Sq. In.) | 8.5 | 144 | 12 | 19 |
| Material | Aluminum | Aluminum | Aluminum | Aluminum |
| Mounting Position | Gable Mount | Gable Mount | Gable Mount | Gable Mount |
| Rough Opening Width (In.) | 8.5 in | 12.5 | 13 in | 19 in |
| Drive Type | Direct Drive | Direct Drive | Direct Drive | Direct Drive |
| Intake/Exhaust | Exhaust | Exhaust | Exhaust | Exhaust |
| Ventilation Type | Exhaust | Gable | Exhaust | Exhaust |
| View Product | View Product | View Product | View Product |
Specifications
Dimensions
Coverage Area (Sq.Ft)
300
Cut-Out Diameter (in.)
12.5
Net-Free Area (Sq. In.)
144
Product Depth (in.)
11.75 in
Product Height (in.)
12 in
Product Width (in.)
15 in
Rough Opening Height (In.)
12.5
Rough Opening Width (In.)
12.5
Details
Airflow (CFM)
1100
Amperage (amps)
0.9
Color Family
Metallic
Color/Finish
Silver
Color/Finish Family
Metallic
Drive Type
Direct Drive
Features
Corrosion Resistant,UV Resistant,Weather Resistant
Horsepower (hp)
1/12 hp
Intake/Exhaust
Exhaust
Material
Aluminum
Mounting Position
Gable Mount
Power Type
Electric Powered
Product Weight (lb.)
13 lb
Recommended Sq. Ft.
300
Returnable
90-Day
Ventilation Type
Gable
Voltage (volts)
115
Wattage (watts)
78
Warranty / Certifications
Manufacturer Warranty
1-Year Warranty
Questions & Answers
Typical questions asked about products:
- Is the product durable?
- Is the product easy to use?
- What are the dimensions of the product?
Customer Reviews
Oct 24, 2020
Easy to install. Happy with it so far. Does make some noise, when in operation, but hey, it’s an ...
Easy to install. Happy with it so far. Does make some noise, when in operation, but hey, it’s an exhaust fan. Well worth it.
by Muddobber
Aug 14, 2020
I bought this for my generator shed. It works perfectly. It came with a plug that I plug directly...
I bought this for my generator shed. It works perfectly. It came with a plug that I plug directly into the generator. When the generator goes on the fan turns on automatically. I didn't have to buy a separate plug.
by Dee
Jul 31, 2020
Bought 4 of these to move air through our stagnet shop. They move alot of air and made a huge dif...
Bought 4 of these to move air through our stagnet shop. They move alot of air and made a huge difference. Noise level is what you would expect from a 36" fan.
by Fanned
Jul 25, 2020
Bought this to use in my basement window while woodworking or running my laser etcher. It's a bit...
Bought this to use in my basement window while woodworking or running my laser etcher. It's a bit pricey for a fan but it's sturdy, the variable speed is great, and pulls a decent amount of air.
by nps
Jul 15, 2020
the product is very easy to install and works well. It has dropped the temperature of my shop by ...
the product is very easy to install and works well. It has dropped the temperature of my shop by at least 30 degrees since I installed it with a thermostat. Its quiet and moves a lot of air.
by RatTerrier
Jul 14, 2020
Need larger opening if installing from the outside.
I installed this from the outside of a CMU block wall. I had to cut a larger opening than 12.5'x12.5' because the fan cage is wider than 12.5' diameter. More like 13.5'x13.5' opening. Also, the fan speeds do not seem to do anything. All three speeds are about the same. That did not matter to me, the fan is working as I need it to, and I am only using the "high" speed. The only bummer was having to redo the opening, as I had already prepped the opening before the fan arrived based on my deadline and the install specs listed on this web site. The specs should indicate front or back mounting opening size.
The fan is solid construction, and was simple to install.
Note: It is very important to have a secondary free-air vent of the same or larger size to allow this fan to draw the heat from the space. This thing moves the air as desired and is reasonably quiet.
by Eric
Jun 17, 2020
The fan was mounted on an exterior wall above our...
The fan was mounted on an exterior wall above our barbecue to exhaust fumes from the patio. The patio has a low ceiling resulting in a thick cloud of smoke in a small area prior to installing the fan. Now, even with a west wind blowing against the fan, we can enjoy smoke free outdoor cooking. The fan has an understandable noise while running which is an acceptable alternative.
by Slipstickguy
Jun 6, 2020
This fan was easy to modify by putting a screen between the fan and the louvers. Keeping insects ...
This fan was easy to modify by putting a screen between the fan and the louvers. Keeping insects out is important to me.
The fans are barely audible on the outside of my garage and inside the sound is louder since there is another fan on each end of the garage.
Installation was easy requiring few tools and extra parts such as nuts and bolts. It helps keep my garage cooler on the hot days of summer.
by TarryLand
Mar 22, 2020
Installed in storage shed with no problem, had a thermostat and wired to fan, working in keeping ...
Installed in storage shed with no problem, had a thermostat and wired to fan, working in keeping storage shed cool,great exhaust fan ! Fan was delivered with no damage and on time,emailed with delivery date. Fan works just like it was described ! Has been working for farewell weeks now with no problems !
by CVjr
Feb 18, 2020
In my generator building, this fan was more than adequate...
In my generator building, this fan was more than adequate to properly ventilate the space and help maintain a cooler environment for the generator and equipment.
by RictheStick
Related Products
Explore More on homedepot.com
Appliances
Automotive
Flooring
More Products
- Lifeproof with Petproof Technology Playful Moments I
- Buy Alexandria Moulding WM 268 1/4 in. x 1-1/8 in. x 96 in. Pine Lattice Moulding
- Buy Super Area Rugs Serene Silky Faux Fur Fluffy Shag Rug Gray 6' x 9'
- Buy NIBCO 1-1/2 in. PVC DWV Hub x Slip-Joint Trap Adapter
- Husky 72 in. Solid Wood Top for Ready-to-Assemble 6 ft. Adjustable Height Workbench
- Buy FurnitureR Chad 39.4 in. Round White MDF Table Wood Legs (Seat 4)
