#1 Home Improvement Retailer

Internet # 203245541

Model # AL14-TB

Store SKU # 326960

Store SO SKU #1000554198

Bentley II 18 in. Indoor/Outdoor Tarnished Bronze Oscillating Ceiling Fan with Wall Control

$139.00
Apply Now
Pay $114.00 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • 3-speed wall control, included
  • Beautiful tarnished bronze finish and distressed oak blades
  • 4.5 in. tarnished bronze downrod with 3/4 in. Dia
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

The Hampton Bay Bentley II Tarnished Bronze Ceiling fan has a caged fan design and is great when air circulation needs to be directed or if space is tight. It also has an oscillating feature that sways back and forth which creates a nice breeze. Operation is easy with its included wall control which can be installed in place of an existing wall switch. This fan is also rated for damp locations so it can be used under covered outdoor locations. Special note: The oscillating function can only be used if a 3-wire conducting cable has been installed in your existing wall switch to the ceiling junction box (a red wire inside your ceiling junction box is evidence of this connection).

Highlights

Product Information

Internet # 203245541

Model # AL14-TB

Store SKU # 326960

Store SO SKU #1000554198

Specifications

Questions & Answers

360Questions
caret
Q:Why can't this fan be mounted on a wall?
by|Jun 3, 2024
1 Answer
Answer This Question

A:  The oscillation assembly is designed for the weight of the fan to go straight down. If installed on a wall the fan will be out of balance and cause the oscillation assembly to fail. There is a version of this fan that is made specifically for the wall, however. Simply search "Bentley II 18 in. Indoor/Outdoor Natural Iron Oscillating Wall Fan" or Model # AM208W-NI on The Home Depot website and you will find the version of this fan that is meant to install on a wall.

by|Jun 3, 2024
    caret
    Q:Can these be mounted on a sloped ceiling ?
    by|Mar 27, 2024
    1 Answer
    Answer This Question

    A:  This fan model cannot be installed on a sloped ceiling, it must be installed on a flat ceiling.

    by|Mar 27, 2024
      caret
      Q:Can this fan be mounted on a wall?
      by|Mar 26, 2024
      1 Answer
      Answer This Question

      A:  No, this version of the fan can only be installed on the ceiling. There is a wall version of this fan that can be found by searching: Internet # 205948168 | Model # AM208W-BN | Store SKU # 1001854908 | Bentley II 18 in. Indoor/Outdoor Brushed Nickel Oscillating Wall Fan

      by|Mar 26, 2024
        caret
        Q:I have a 14/2 wire to a nearby box. (Black, white, ground) Can I run the fan with full variable oscillating and full variable speed or do I need a 14/3 wire with red wire?
        by|Mar 26, 2024
        1 Answer
        Answer This Question

        A:  The additional red wire is required to operate both the fan and the oscillation. Without it you would need not be able to power the oscillation function. However, there are two alternatives for your situation. You can order a remote/receiver kit which will allow you to control the fan with a remote control and will allow you to install the fan on 14/2 wire. The kit can be purchased by contacting the manufacturer's customer service team at 1-877-902-5588. Or, you can purchase the Bentley III 22 in. ceiling fan which is slightly bigger but already includes the remote/receiver kit instead of the wall control.

        by|Mar 26, 2024
          Showing 1-4 of 360

          Customer Reviews

          4 out of 5

          • 4 out of 702 reviews
          • 70% recommend this product
          Filter by:
          Showing 1-10 of 702 reviews
          Thumbs Up
          This little baby works good. The air flow quality is awesome. When in motion the only thing I wish they would adjust is the oscillator to swing more in a 90 degree angle when motioning back and forth.
          by
            • Recommended
            Excellent Fan for a vanity area!! Your wife will LOVE you for installing this!! Having the oscillating feature you can blow the hot shower air out the window then sit down and dry your hair while being cooled off by the fan. Great product! Saved my marriage!!
            by
            Response from Ed Yano HDC RepAug 7, 2023
            Thank you so much for taking the time to share your positive experience with the 18" Bentley II ceiling fan! We're thrilled to hear that the fan has been a wonderful addition to your vanity area and has brought added comfort and functionality to your daily routine.

            It's fantastic to know that the oscillating feature has allowed you to efficiently ventilate the hot shower air and then enjoy a refreshing breeze while getting ready. We're delighted that the fan's performance has exceeded your expectations and contributed to a more enjoyable experience. If you have any further questions, need assistance, or want to explore other products, please feel free to reach out to our customer support team. We're here to help and ensure that you continue to have a fantastic experience with our products.

            Thank you again for your feedback and for choosing the 18" Bentley II ceiling fan. We're grateful to have you as a satisfied customer! HDCEdYano
            • Verified Purchase
            2 found this review helpful
            Beautiful design and powerful
            Pros: Aesthetically pleasing; solid construction; powerful fan. Cons: 1. Fan does not oscillate to a full 45-degree angle in either direction (more like 22.5). Given that we were using it for a corner application, the angle was too shallow. I ended up manipulating/locking angle at 45 degrees (see review by PDXGuy). A lot of work, but worth it. 2. Hanger bracket too small 3. Canopy could use an interior foam surround, so that the downrod doesn’t get scratched up during installation.
            by
              • Recommended
              Sticky controls
              Looks great. Easy to operate, and puts out a lot of air (which I like). However, we have a 3-way switch and the control is sticky and not smooth to operate. This fan is also surprisingly loud. In addition to the old fashioned fan noise, When I have it on it sounds like airplanes or lawn mowers are in the distance.
              by
                1 found this review helpful
                Durability issue
                Bought three with one as spare. After 6 months, one stopped oscillating and motor starts making noise. Changed out with the spare fan. After few months, fan motor stopped working on the other one and not too long after that the other fan stopped working also. The worst part is the corrosion. I anticipate have to change out in 1 to 2 years due to being in Florida. However, these fans rusted within 6 months. Here is the picture of less than year old.
                by
                Response from Ed Yano HDC RepMay 5, 2021
                Please call 1-877-902-5588 for assistance with your oscillation issue. HDCEdYano
                  7 found this review helpful
                  Fan is perfect for our gazebo rebuild. Compact and efficient....
                  Fan is perfect for our gazebo rebuild. Compact and efficient. No long fan blades to droop and be a home to mud daubers!
                  by
                  • Verified Purchase
                  2 found this review helpful
                  Fan works well . The only confusing thing I found...
                  Fan works well . The only confusing thing I found was the fan control #1 setting is the highest speed and # 3 setting is the lowest speed. Fan Extremely easy to assemble. I installed the fan on the front porch as I didn't have the room for a regular ceiling fan.
                  by
                  • Verified Purchase
                  2 found this review helpful
                  Durability issue
                  We purchased two of these for each of our kids room after a friend recommended them. I was impressed with the how they operated but after 3 months, one of the fans somehow began wobbling, like it was out of balance. The fan blade appeared to worked itself loose. The other unit worked great until the oscillator stopped working. I thought we wouldn’t have to replace any ceiling fans so soon. We are going to repurpose them outside on the patio on a fixed position. Would not recommend for the intended purpose.
                  by
                  Response from Ed Yano HDC RepOct 30, 2020
                  Hello, please give us a call at 1-877-527-0313 so we may assist with correcting thoes issues. HDCEdYano
                    9 found this review helpful
                    Had to hack it to tilt at 45 degrees
                    Excellent quality and easy to install, but oscillates only by +/- 20 degrees, not +/-45 degrees as advertised. I had to hack it to disconnect the oscillator (which is fine for our corner application) and lock it at 45 degree angle. See photos 1) Initial maximum tilt of 20 degrees 2) Remove 4 screws attaching the bracket to the fan; remove back cover 3) Linkage arm and actuating crank are too short 4) Remove linkage arm, cut red wire. 5) Added stopper using 5/8" #6-24 stainless screw and nuts 6) Now lies at a 45 degree tilt
                    by
                      • Recommended
                      15 found this review helpful
                      Install was a bit longer than expected but we love...
                      Install was a bit longer than expected but we love them!
                      by
                      • Verified Purchase
                      3 found this review helpful
                      Showing 1-10 of 702 reviews

                      Get 10% off your purchase

                      Sign up for emails & save 10% on select home decor. Valid on select items.