|Brand||Husky||Kraft Tool Co.||Marshalltown||Wagner|
|Name||1.75 Gal. Texture-Pro Hopper Gun with 3 spray tips||Broadcast Gun and Hopper||SharpShooter 2.0 Gun Only||Power Tex Texture Sprayer|
|Tool Type||Texture Sprayer/Hopper Gun|
|View Product||View Product||View Product||View Product|
The Husky hopper gun is able to spray many different coatings. Please check with your paint manufacturer on the best ways to spray their specific product.
After use, remove all remaining texture material from the hopper. Then disconnect the gun from the air supply and, while holding trigger, rinse hopper and gun with water. Rinse until water runs clean. After cleaning, add air tool oil to gun to protect seals during storage. If texture material is allowed to dry in the gun you will need to disassemble the gun and clean with bottle brushes. Cleaning should be done after use, or if gun will be left long enough to allow the texture material to dry.
Yes it will work with a pancake compressor. Just turn your outflow down to 30 PSI. You may have to stop to let the compressor catch up every few minutes. But it will do it
Basically YES, as with most sprayers. Three tips help "size" the texture. Other forms of texture such as "knock-down" are done by first spraying a large texture from a gun like this, then skip-troweling it flat. HTH's